Siemens simatic PCIL43 - Manuals
Siemens simatic PCIL43 – User Manual in PDF format online.
Manuals:
User Manual Siemens simatic PCIL43
Summary
iii SIMATIC Rack PC IL 40 SManualA5E00200171-01 Preface Purpose of the Manual This manual contains all the information you need for commissioning and using theSIMATIC Rack PC IL 40 S. It is intended both for programming and testing/debugging personnel whocommission the device itself and connect it w...
Preface iv SIMATIC Rack PC IL 40 SManual A5E00200171-01 Structure of the Manual In Chapters 1 to 4 the manual contains the most important instructions for startingup and using the Rack PC. Chapters 5 to 9 are reference sections you will onlyrequire in special cases. Important Information This chapte...
Preface v SIMATIC Rack PC IL 40 SManualA5E00200171-01 Retrofit Notes Appendix C describes the permissible variants of equipment for Rack PC includingdrives and processors and the resulting permissible operating conditions. Glossary The glossary explains important terms. Alphabetical Index The index ...
Preface vi SIMATIC Rack PC IL 40 SManual A5E00200171-01 A&D Technical Support Worldwide, available 24 hours a day: Johnson City Nuernberg Beijing Technical Support Worldwide (Nuernberg) Technical Support 24 hours a day, 365 days a year Phone: +49 (0) 180 5050-222 Fax: +49 (0) 180 5050-223 E-Mail...
Preface vii SIMATIC Rack PC IL 40 SManualA5E00200171-01 Service & Support on the Internet In addition to our documentation, we offer our Know-how online on the internet at: http://www.siemens.com/automation/service&support where you will find the following: • The newsletter, which constantly...
ix SIMATIC Rack PC IL 40 SManualA5E00200171-01 Contents Preface iii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Information 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Contents x SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.4 Installation of Expansion Cards 4-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1 Installing and Uninstalling the Device for Holding Down the Modules 4-9 . . . 4.4.2 Installing and Uninstalling an Expansion M...
Contents xi SIMATIC Rack PC IL 40 SManualA5E00200171-01 9.3.1 Installing Drivers under Windows 2000 9-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3.2 Installing the Raid Controller Software 9-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3.3 Installing the Burner ...
1-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Important Information 1.1 Safety Instructions ! Caution The safety instructions given on the reverse of the title page of this manual mustbe observed. Before expanding your Rack PC refer to Chapter 4 and read therelevant safety instructions. This devic...
Important Information 1-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Power Connection Install the cables so that no one can step on them or trip over them. When youconnect the device, adhere to the relevant instructions in Chapter 2 of this manual. Do not connect or disconnect power supply cables ...
Important Information 1-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Country-Specific Information For the United States and Canada: In the United States and Canada USA, a CSA or UL-listed power supply cablemust be used. The male plug is a 5-15 style. For operation with 120 V: Use a UL Listed, CSA L...
Important Information 1-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Battery There is a battery in this device on the motherboard. Batteries may only beexchanged by technical personnel. ! Caution There is the danger of an explosion, if the battery is not exchanged as directed.Replace only with the...
Important Information 1-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 1.2 Certificates, Directives and Declarations Notes on the CE Symbol The following applies to the SIMATIC product described in this manual: EMC Directive This product fulfils the requirements for the EC directive 89/336/EEC on“ele...
Important Information 1-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Connecting Peripherals The requirements regarding noise immunity (EN 61000-6-2) are met when youconnect a peripheral suitable for an industrial environment. Peripheral devices are only be connected via shielded cables. ISO 9001 C...
Important Information 1-7 SIMATIC Rack PC IL 40 SManualA5E00200171-01 EMC USA Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits ar...
Important Information 1-8 SIMATIC Rack PC IL 40 SManual A5E00200171-01 1.4 Transport Transporting Despite the fact that the Rack PC is of rugged design, its internal components aresensitive to severe vibrations or shock. You must therefore protect the PC fromsevere mechanical stress when transportin...
2-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Welcome to the SIMATIC Rack PC IL 40 S Chapter Overview Section Description Page 2.1 Front View with Closed Front Door 2-2 2.2 Front View with Opened Front Door 2-3 2.3 Side View 2-4 2.4 Rear View 2-5 2.5 Drives 2-7 2.6 Backup Battery 2-10 2
Welcome to the SIMATIC Rack PC IL 40 S 2-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 2.1 Front View with Closed Front Door 1 2 3 4 Figure 2-1 Front View with Closed Front Door 1 LEDs/Operating modes The LEDs show the operating mode of the device: POWER yellowgreenoff Standby, PC is in Windows sta...
Welcome to the SIMATIC Rack PC IL 40 S 2-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 2.2 Front View with Opened Front Door 1 2 3 4 5 6 Figure 2-2 Front View with Opened Front Door 1 USB (optional) 2 connectors for Universal Serial Bus (High Current, high speed USB 2.0). You canuse the USB ports to...
Welcome to the SIMATIC Rack PC IL 40 S 2-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 5, 6 Removable Rack (optional, not represented) Removable racks for EIDE harddisks are available. Caution Only qualified personnel is authorized to open the Rack PC or carry out repairs ormaintenance work. 2.3 Si...
Welcome to the SIMATIC Rack PC IL 40 S 2-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 2.4 Rear View 3 4 5 6 7 8 9 10 11 12 1 2 13 14 16 17 18 15 Figure 2-4 Rear View 1 Power Supply Fan Here are openings for power supply ventilation. Caution The air venting slots for outgoing air must not be obstruc...
Welcome to the SIMATIC Rack PC IL 40 S 2-7 SIMATIC Rack PC IL 40 SManualA5E00200171-01 2.5 Drives As the Rack PC can be configured freely, the following drives are available -depending on your order. 2.5.1 Disk Drive You can store programs and data on diskettes with the disk drive and load themfrom ...
Welcome to the SIMATIC Rack PC IL 40 S 2-8 SIMATIC Rack PC IL 40 SManual A5E00200171-01 2.5.3 CD ROM Drive Optionally, the CD ROM drive is installed in the drive holder. The CD ROM driveenables you to read CD-ROM, CD-RW and Audio/video CDs. Operation When pressing the open/close button the CD drawer...
Welcome to the SIMATIC Rack PC IL 40 S 2-9 SIMATIC Rack PC IL 40 SManualA5E00200171-01 2.5.4 CD R/RW Drive The CD R/RW drive is optionally installed in the drive holder. This drive supportsthe following recording processes: Disc at once, Track at once, Session at once,Packet writing. CD ROMs, CD Rs ...
Welcome to the SIMATIC Rack PC IL 40 S 2-10 SIMATIC Rack PC IL 40 SManual A5E00200171-01 2.6 Backup Battery A backup battery (3.6 V lithium battery), located on the motherboard, powers thehardware clock even after the device is switched off. It is located on themotherboard. Batteries may only be exc...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 3.1 Unpacking and Checking the Scope of Delivery Unpacking the Rack PC Unpack your Rack PC as follows: 1. Remove the device from the package. 2. Keep the original packing in case you have to transpo...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 3.2 Installing the Rack PC The Rack PC is suitable for vertical and horizontal fitting in consoles, switch boardsand 19” rack systems. The Rack PC meets the requirements for a fire enclosure to EN609...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 355.6 ± T1 14 ± T1 209.6 ± T1 8.251 ± T1 88.5 ± T2 3.484 ± T2 72,6 ± T2 2.858 ± T2 127 ± T1 5 ± T1 33.54 ± T3 1.32 ± T3 100 ± T1 3.937 ± T1 100 ± T1 3.937 ± T1 100 ± T1 3.937 ± T1 Dimensions for tele...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 3.3 Preparing for Operation Connection to the Power Supply Unit The power supply unit is designed for 120/230/240 V systems. It is not necessaryto adjust the voltage span. 1 Figure 3-3 Connection to...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-7 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Connecting and Switching on the Rack PC Before you connect the Rack PC to the mains, the peripheral units must beconnected. 1. Insert the connector cable of the peripheral units into the correspondin...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-8 SIMATIC Rack PC IL 40 SManual A5E00200171-01 3.4 Connecting Peripheral Units PS/2 Mouse Parallel/LPT LAN Audio PS/2 Keyboard Serial/COM1 VGA USB Figure 3-4 Ports on the back the devices Notice When connecting peripheral units, ensure that the ...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-9 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Connecting the Printer to a USB Port You can find out how to connect a USB printer in Connecting USB devices. Connecting Monitors You connect external multisynchronous monitors using the standardVGA ...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-10 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Connecting a Serial Mouse You can connect a serial mouse to the serial port “Serial/COM1” or COM 2(optional). To operate a serial mouse, the appropriate mouse driver must beinitialized and assigned...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-11 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Connecting USB Devices Single as well as several USB devices (mouse, keyboard or printer) can beconnected to a USB port. • Insert the USB device connector into the USB port. The device is recognized...
Setting Up and Operating the SIMATIC Rack PC IL 40 S 3-12 SIMATIC Rack PC IL 40 SManual A5E00200171-01 3.5 Ethernet (LAN) Networking the Rack PC via the RJ45 Ethernet Port The RJ45 Ethernet port is a Twisted Pair (TP) port with a data transfer rate of10/100 Mbps. The onboard port is compatible with ...
4-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 SIMATIC Rack PC IL 40 S Expansions What Does This Chapter Contain? You can enhance the performance of your Rack PC by adding an additional mainmemory, drives and expansion modules. This chapter describes how to expandyour Rack PC. Please observe the re...
SIMATIC Rack PC IL 40 S Expansions 4-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.1 Opening the Unit 4.1.1 Prerequisites The device is designed for easy maintenance so that any work that is necessarycan be done quickly and at low cost. Caution The electronic components on the printed circuit boa...
SIMATIC Rack PC IL 40 S Expansions 4-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Tools You can carry out all necessary installation work on the Rack PC with screwdriversof the TORX T8, TORX 10 and TORX T15 types. 4.1.2 Opening the Housing Cover To open the housing cover, proceed as follows: 1. Pul...
SIMATIC Rack PC IL 40 S Expansions 4-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.1.3 Opening the device front For easy access to the motherboard and to the drive ports, the device front hasbeen designed to allow swivelling. Proceed as follows to open the device front: 1. Tilt the front door dow...
SIMATIC Rack PC IL 40 S Expansions 4-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4. Swivel the device front wide until the latch on the side (3) snaps into place (see figure 4-3). 3 4 Figure 4-3 Opening the front door Notice When closing the device front, you have to lift up the the latch on the s...
SIMATIC Rack PC IL 40 S Expansions 4-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.1.4 Components Visible after Opening the Unit Components Once you have removed the housing cover of your unit, following components arevisible: 1 Motherboard 2 Modules slots (6x PCI, 1x AGP) 3 Device for holding do...
SIMATIC Rack PC IL 40 S Expansions 4-7 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4.1.5 The Motherboard The motherboard is the heart of the Rack PC. Here, data is processed and stored,and interfaces and device I/Os are controlled and managed. You will find a detaileddescription of the motherboard i...
SIMATIC Rack PC IL 40 S Expansions 4-8 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.4 Installation of Expansion Cards Notes about the Cards The Rack PC is designed for the use with cards as per the ATX/PCI specification.The dimensions of the cards may not exceed the stated dimensions. If the heigh...
SIMATIC Rack PC IL 40 S Expansions 4-10 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Aligning the Holding-Down Device Proceed as follows to install the holding-down device. 1. Remove the binding screw and push the down holder until it is resting firmly on the module. The module must now be introduce...
SIMATIC Rack PC IL 40 S Expansions 4-11 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4.4.2 Installing and Uninstalling an Expansion Module Proceed as follows: 1. Open the housing as described in Section 4.1.2. 2. Remove all connectors from the expansion module and note the assignment. 3. Remove the d...
SIMATIC Rack PC IL 40 S Expansions 4-12 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.5 Installing and Uninstalling Drives 4.5.1 Installing and Uninstalling the drive support module The drive support module consists of the front and side drive support. A CD-ROM,CD-RW, floppy disk and a removable ra...
SIMATIC Rack PC IL 40 S Expansions 4-13 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4. Remove the drive supports on the side (3) only when necessary, for example to fit a drive in the front drive support (1). 5. Undo the six screws (2) to remove the drive support on the side (3). 6. Note down the ca...
SIMATIC Rack PC IL 40 S Expansions 4-14 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.5.2 Installing and Uninstalling the Hard Disk Drive(s) Caution Drives are sensitive components and may not be exposed to high shock loads.When installing and uninstalling the drives, make sure they do not open oro...
SIMATIC Rack PC IL 40 S Expansions 4-15 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4.5.3 Installing and Uninstalling the Floppy/CD ROM Drive orRemovable Rack Caution Drives are sensitive components and may not be exposed to high shock loads.When installing and uninstalling the drives, make sure the...
SIMATIC Rack PC IL 40 S Expansions 4-16 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.6 Installing and Uninstalling the Power Supply Unit ! Warning Only qualified personnel is authorized to exchange the power supply unit. 1. Open the housing as described in Section 4.1.2 and 4.1.3. 2. Remove the da...
SIMATIC Rack PC IL 40 S Expansions 4-17 SIMATIC Rack PC IL 40 SManualA5E00200171-01 4.7 Installing and Uninstalling the Motherboard 1. Open the housing as described in Section 4.1.2. 2. Remove all the modules from the slots (proceed as described in Section 4.4.2). 3. Remove the cable tie which secur...
SIMATIC Rack PC IL 40 S Expansions 4-18 SIMATIC Rack PC IL 40 SManual A5E00200171-01 4.8 Installing and Uninstalling the Device Fan The Rack PC is ventilated by the front fan, which blows air into the housing(pressurization). 1. Switch off the device. 2. Open the front door. 3. Remove the fan cover....
SIMATIC Rack PC IL 40 S Expansions 4-19 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Caution To ensure that the device is adequately cooled, take care that the running directionof the fan is correct when installing. Ensure that the arrow on the fan points into the housing from the fan holder. Only qu...
5-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Configuring the SIMATIC Rack PC IL 40 S The manual ”BIOS Setup” shows you how to call and operate the BIOS setup.The menus and setting possibilities offered by the BIOS setup are alsodescribed in detail. This manual is on the CD supplied “Rack PC IL 40...
Configuring the SIMATIC Rack PC IL 40 S 5-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 5.1 BIOS Settings You can set up the system functions and the hardware configurations of yourSIMATIC Rack PC IL 40 S in the BIOS. Before delivery, the BIOS of the Rack PC is set differing from the standardBIOS s...
6-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Error Diagnosis Chapter Overview This chapter provides you with tips on how to localize and troubleshoot frequentlyoccurring problems. • Please look up the meaning of operating system error messages in youroperating system documentation. Section Descri...
Error Diagnosis 6-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 6.1 Problems When Using Modules from Other Manufacturers Error Display The PC crashes during power up. Cause The following causes are possible: – Double assignment of I/O addresses – Double assignment of hardware interrupts and/or DMA ...
Error Diagnosis 6-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 6.2 The Monitor Remains Dark Cause and Remedy The following causes are possible: The monitor has been switched off. • Switch on the monitor. The monitor is in “powersave” mode. • Press any key on the keyboard. The brightness button has ...
Error Diagnosis 6-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 6.4 The Clock Time and/or the Date in your PC Is Incorrect Remedy Set the clock time and the date in the setup menu. Press <F2> to call setup when booting the computer. Note The battery is dead if the clock time and the date are ...
7-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Hardware Information Chapter Overview Section Description Page 7.1 Current Requirement of the Components (Maximum Values) 7-2 7.2 Overview of the Components and Ports 7-3 7.3 System Resources 7-4 7.4 Monitoring Functions 7-5 7.5 Ports 7-6 7.6 Power Sup...
Hardware Information 7-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 7.1 Current Requirement of the Components (Maximum Values) Basic System Component Voltage +5V +3.3V +12V –12V 5Vaux Motherboard FSC1527 with Intel Pentium 4 Processor 2.4 GHz / Intel Celeron Processor 2 GHz 0.9 A 3.4 A 8 A 0.05 A ...
Hardware Information 7-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 7.2 Overview of the Components and Ports Component/Port Description Parameters Chipset Intel 845GE • CPUs with 533 / 400 MHz PSB,SDRAM DDR 333/266 unbuffered,without ECC BIOS Update via software CPU Pentium 4 / Celeron(type mPGA478...
Hardware Information 7-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 7.3 System Resources All system resources (hardware address, memory configuration, IRQ,DMA channel) are assigned dynamically by the Windows OS, depending on thehardware configuration, drivers and connected peripheral devices. You ...
Hardware Information 7-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 7.4 Monitoring Functions 7.4.1 Overview Function The following individual functions are implemented: • Temperature monitoring and excess/insufficient temperature indication • Watchdog • Fan monitoring Notice The software “SystemGua...
Hardware Information 7-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 7.4.3 Watchdog (WD) Function The watchdog monitors the execution of a program. The purpose of the WD is tonotify the user of a program crash through various reactions. You will find more information on the CD supplied “Rack PC IL ...
8-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 RAID Controller Type A Promise FASTTRAK 100 TX2 RAID Controller built in for EIDE drives. Structure The system is configured as RAID 1 (data is distributed on two hard disks). Thehard disks are each operated on an EIDE bus as masters. This way the syst...
9-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Reinstallation of the Software What Does This Chapter Contain? This chapter describes how to reinstall software in case the preinstalled softwareshould be faulty. Chapter Overview Section Description Page 9.1 Cause / Remedy 9-2 9.2 Restoring the Softwa...
Reinstallation of the Software 9-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 9.1 Cause / Remedy In case of software errors reinstall your software using the Rack PC IL 40 SDocumentation and Drivers CD or the Restore CD. Rack PC IL 40 S Documentation and Drivers CD: contains the documentationand t...
Reinstallation of the Software 9-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 9.2 Restoring the Software to Delivery Condition Using the Restore CD Using the Restore CD (not available in all delivery versions) you can restore thesoftware to its original delivery state. The CD contains the necessary...
Reinstallation of the Software 9-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 9.2.1 Setting the Language Selection for Windows 2000 The Multilanguage User Interface (MUI) allows you to set the Windows 2000menus and dialogs to another language. The desired language for Windows 2000 menus and dialog...
Reinstallation of the Software 9-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 9.3 Installing Drivers and Software To install the drivers and software from the “Rack PC IL 40 S Documentation andDrivers” CD supplied, proceed as follows: • Place the CD in the CD ROM drive. • Start the Start programm o...
Reinstallation of the Software 9-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 9.3.2 Installing the Raid Controller Software Reinstalling the Software Please follow the instructions on the manual or the electronic manual supplied onthe CD on RAID Controller. Instructions on Windows NT For Windows N...
Guidelines for Handling Electrostatic A-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 A.1 What Does ESD Mean? Definition All electronic components are equipped with high-integrated modules orcomponents. Conditioned by their technology, these electronic components areextremely sensitive to overvolta...
Guidelines for Handling Electrostatic A-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 A.2 Electrostatic Charging Charging Anyone who is not conductively connected to the electrical potential of theirsurroundings can be electrostatically charged. The maximum electrostatic voltage values which an oper...
Guidelines for Handling Electrostatic A-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 A.3 Basic Protective Measures against Discharge of Static Electricity Ensuring a Good Ground Connection When handling electrostatic sensitive devices, ensure that your person, theworkplace and packaging are ground...
Retrofit Notes C-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Permissible Variants of Equipment for the Temperature Range of 5 to 35 _ C CD-ROM / CD-R/RWHD in removable rack Floppy CD-ROM CD-ROM / CD-R/RWHD in removable rack Figure C-1 Permissible Variants of Equipment for the Temperature Range of...
Glossary-1 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Glossary What Does this Chapter Contain? This chapter contains a glossary in which you will find a list of the terminology usedin conjunction with the SIMATIC range of personal computers and programmingdevices and a brief explanation of each of ...
Glossary Glossary-2 SIMATIC Rack PC IL 40 SManual A5E00200171-01 A AC Alternating Current. Current that changes its direction at regular intervals. Access Protection Access to the programs and data of a programming device can be protected bypasswords. The user password or Superuser password can be a...
Glossary Glossary-3 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Authorization Diskette The authorization disk contains the authorization required by the re-installation of asoftware. B Backup Duplicate of a program, storage medium or database. Created to backup or toprotect irreplaceable data of wor...
Glossary Glossary-4 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Booting Loading operation which transfers the operating system to the main memory. Bps The speed (in bits per second) with which information is transmitted over a datalink. C Cache The cache memory buffers often used data to increase t...
Glossary Glossary-5 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Configuration Files These are files containing data which define the configuration after booting.Examples of such files are CONFIG.SYS, AUTOEXEC.BAT and the registry. Configuration Software The configuration software updates the device ...
Glossary Glossary-6 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Device Configuration The configuration of a programming device contains information on hardware anddevice options, such as memory configuration, drive types, monitor, networkaddress, etc. The data are stored in a configuration file and...
Glossary Glossary-7 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Drop-Down Menu In graphics-supported programs, a menu line is positioned on the top edge of thescreen. The menu titles contained in this line can be set either as drop-down orpull-down menus. Drop-down menus “roll” down as soon as the m...
Glossary Glossary-8 SIMATIC Rack PC IL 40 SManual A5E00200171-01 F File A complete, named collection of information, such as a program, a set of dataused by a program, or a user-created document. A file is the basic unit of storagethat enables a computer to distinguish one set of information from an...
Glossary Glossary-10 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Industrial Ethernet Bus system based on the Ethernet standard. Components of the SIMATIC S5 andS7 series (programming devices, programmable logic controllers, programmablecontrol systems) can be networked using Industrial Ethernet NIC...
Glossary Glossary-13 SIMATIC Rack PC IL 40 SManualA5E00200171-01 N Network Link between programming devices and programmable controllers by means ofinterface modules, physical cables, and the corresponding software to allow dataexchange between the devices. O Operating System Collective term for all...
Glossary Glossary-14 SIMATIC Rack PC IL 40 SManual A5E00200171-01 PC Personal computer PC Card Trademark of the Personal Computer Memory Card International Association(PCMCIA). Designation for auxiliary cards that conform with PCMCIAspecifications. The PC Card that has roughly the size of a credit c...
Glossary Glossary-15 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Power Button The device can be switched on or off with the power button. Power Management The Power Management of a modern PC can regulate the consumption of energyof the most important components of the computer (e.g. monitor, hard di...
Glossary Glossary-16 SIMATIC Rack PC IL 40 SManual A5E00200171-01 RAM RAM (Random Access Memory) is a volatile read/write memory in which everymemory location can be addressed individually and its contents changed. RAM isused to store data and programs. Rechargeable Battery Reachargeable battery is ...
Glossary Glossary-18 SIMATIC Rack PC IL 40 SManual A5E00200171-01 STEP 7 Programming software for the creation of user programs for SIMATIC S7 control. STN Display Super Twist Nematic passive display Suspend to Disk Transition to power-off status, with prior saving of the system contents to the hard...
Glossary Glossary-20 SIMATIC Rack PC IL 40 SManual A5E00200171-01 V VGA Video Graphics Array. Industrial standard graphics adapter for use with anycommonly used software. Video Adapter Also known as Video Controller, this electronic component generates the videosignal sent through a cable to a video...
Glossary Glossary-21 SIMATIC Rack PC IL 40 SManualA5E00200171-01 The memory in which a program is stored which can be processed. Also known asmain memory. Write Protection Write protection for files or diskettes • Write protection for files; this type of write protection is stored in the computerand...
Index-23 SIMATIC Rack PC IL 40 SManualA5E00200171-01 Index A AC Power Supply, technical specifications, 7-6Acclimatization time, 1-1Additional Software, 2-9Ambient conditions, 1-1Approvals, iiiAudio input, 2-6Audio output, 2-6 B Backup battery, 2-10, 4-7Battery, safety instructions, 1-4BIOS, 7-3 err...
Index Index-24 SIMATIC Rack PC IL 40 SManual A5E00200171-01 Hardware Information, 7-1 I Installation, Dimension drawings, 3-4, 3-5Installing Burner Software, 9-6Controller Software, 9-6Drivers and Software, 9-5 Installing and uninstalling device fan, 4-18Drives, 4-12expansion card, 4-11floppy disk d...
Siemens Manuals
-
Siemens HF35M630/01
User Manual
-
Siemens HF35M630/01
Installation Manual
-
Siemens 1015N-2MFM-1A
Manual
-
Siemens 108
User Manual
-
Siemens 11
User Manual
-
Siemens 1168
User Manual
-
Siemens 120 Series
User Manual
-
Siemens 125-1957
User Manual
-
Siemens 125-3584T
User Manual
-
Siemens 125-5033
User Manual
-
Siemens 140
User Manual
-
Siemens 175V
User Manual
- Siemens 1800C User Manual
-
Siemens 18inc Freezer Tower with Dispenser
User Manual
-
Siemens 18inc Wine Tower
User Manual
-
Siemens 1G03QB 630G
User Manual
-
Siemens 2 D SP
User Manual
-
Siemens 2000
User Manual
- Siemens 2005C User Manual
-
Siemens 2010 Tango
User Manual