Page 4 - Safety Guidelines; Qualified Personnel; Trademarks
Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have n...
Page 5 - iii; Table of contents
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 iii Table of contents 1 Introduction ............................................................................................................................................. 1-1 1.1 Preface ..............................
Page 6 - iv
Table of contents SIMATIC Rack PC IL 43 iv Operating Instructions, Edition 09/2005, A5E00432875-01 9 Functions ................................................................................................................................................ 9-1 9.1 Overview of the .......................
Page 9 - Introduction; Preface; Purpose of this document; describes the state of delivery as of September 2005.; Position in the information scheme; corresponding manuals.; Conventions; name SIMATIC Rack PC IL 43.; History; Currently released versions of this operating manual:
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 1-1 Introduction 1 1.1 1.1 Preface Purpose of this document These operating instructions contain all the information you need for commissioning and using the SIMATIC Rack PC IL 43. It is intended both for programming and t...
Page 10 - Guide for the operating instructions
Introduction 1.2 Guide for the operating instructions SIMATIC Rack PC IL 43 1-2 Operating Instructions, Edition 09/2005, A5E00432875-01 1.2 1.2 Guide for the operating instructions Contents format Table of Contents Table of Contents Organization of the documentation, including the index of pages and...
Page 11 - Safety information; General safety instructions; contact your service representative.; Repairs; Only authorized personnel are permitted to repair the device.; System expansions; find out which system expansion devices may safely be installed.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 2-1 Safety information 2 2.1 2.1 General safety instructions Caution Please observe the safety instructions on the back cover of this documentation. You should not expand your device unless you have read the relevant safet...
Page 12 - Battery; used batteries in accordance with local regulations.; ESD guidelines; All devices and tools must be free of static charge.
Safety information 2.1 General safety instructions SIMATIC Rack PC IL 43 2-2 Operating Instructions, Edition 09/2005, A5E00432875-01 Battery This device is equipped with a Lithium battery. Batteries may only be replaced by qualified personnel. Caution There is the risk of an explosion if the battery...
Page 13 - Description; Overview; High-level performance
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 3-1 Description 3 3.1 3.1 Overview The SIMATIC Rack PC IL 43 is a powerful industrial PC in 19" rack format design (4HE). It is perfectly suited for high-performance industrial PC applications. • High-level performance...
Page 14 - Areas of application; Highlights
Description 3.2 Areas of application SIMATIC Rack PC IL 43 3-2 Operating Instructions, Edition 09/2005, A5E00432875-01 3.2 3.2 Areas of application The SIMATIC Rack PC IL 43 offers system integrators, cabinet designers, system engineers and machine designers a 19" rack PC platform for high-perfo...
Page 15 - Function
Description 3.4 Function SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 3-3 3.4 3.4 Function • Integrated, assigned monitoring functions – Fan speed (CPU, power supply and front fan) – Temperature (case, processor) – Program execution (watchdog) • RAID1 for automatic d...
Page 18 - Design; External structure
Description 3.6 Design SIMATIC Rack PC IL 43 3-6 Operating Instructions, Edition 09/2005, A5E00432875-01 3.6 3.6 Design 3.6.1 External structure Front view of the device Pos Description (1) Front panel with aperture for ventilation of the device (filter mat and fan are located behind this front pane...
Page 19 - Operator controls
Description 3.6 Design SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 3-7 3.6.2 Operator controls Operator control on/off button Pos Description (1) The on/off/reset buttons have three functions: - Switch on the PC (press briefly 1x) - Shut down the operating system an...
Page 20 - Connecting elements; Interfaces
Description 3.6 Design SIMATIC Rack PC IL 43 3-8 Operating Instructions, Edition 09/2005, A5E00432875-01 3.6.3 Connecting elements Interfaces Layout of the interfaces on the rear of the device Pos Name Description (1) MOUSE Connection for a PS/2 mouse (2) USB C and D USB connector (3) LPT Parallel i...
Page 21 - Status displays
Description 3.6 Design SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 3-9 Power supply Position of the IEC power plug Description IEC power connector for the AC power supply to the device. The maximum permitted power range is 120 V AC to 240 V AC 3.6.4 Status displays ...
Page 23 - Deployment planning; Transport; Unpacking the device; Note the following points when you unpack the unit
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 4-1 Deployment planning 4 4.1 4.1 Transport Although the Rack PC has a rugged design, its internal components are sensitive to severe vibrations or shock. You must therefore protect the PC from severe mechanical stress whe...
Page 24 - Noting the device identification data; panel of the device or on the inside of the front door.; Order number of the device; Device equipment
Deployment planning 4.2 Unpacking and checking the delivery unit SIMATIC Rack PC IL 43 4-2 Operating Instructions, Edition 09/2005, A5E00432875-01 Noting the device identification data The device can identified uniquely with the help of these numbers in case of repairs or theft. Enter the following ...
Page 25 - Ambient and environmental conditions
Deployment planning 4.3 Ambient and environmental conditions SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 4-3 4.3 4.3 Ambient and environmental conditions When you plan your project, you should make allowances for: • Note the climatic and mechanical environmental con...
Page 27 - Installation; Installing the device; Possible areas of installation
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 5-1 Installation 5 5.1 5.1 Installing the device Possible areas of installation The device may be installed in control desks, switching cabinets and 19`` rack systems, both horizontally and vertically. Possible mounting me...
Page 29 - Connecting; Connecting peripherals; Note before connecting; disconnected from the power supply.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 6-1 Connecting 6 6.1 6.1 Connecting peripherals Note before connecting Notice Connect only I/O modules approved for industrial applications to EN 61000-6-2:2001. Note Hot-plug I/O modules (USB) may be connected while the P...
Page 30 - Connecting the device to power; To be noted before you connect the device; not necessary to adjust the voltage range.
Connecting 6.2 Connecting the device to power SIMATIC Rack PC IL 43 6-2 Operating Instructions, Edition 09/2005, A5E00432875-01 6.2 6.2 Connecting the device to power To be noted before you connect the device Note The long-range power supply module is designed for operation on 100-240 networks. It i...
Page 32 - Secure the power plug; the device to be easily removed from the mains.
Connecting 6.2 Connecting the device to power SIMATIC Rack PC IL 43 6-4 Operating Instructions, Edition 09/2005, A5E00432875-01 Secure the power plug You can secure the power plug in order to avoid unintentional disconnection of the power cord. Steps in securing the power plug 1 Remove the fastening...
Page 33 - Commissioning; Prerequisites for commissioning; automatically opened when the startup routine is completed.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 7-1 Commissioning 7 7.1 7.1 Prerequisites for commissioning • Before you switch on the device, you should verify that the peripherals are connected, i.e. the keyboard, mouse, monitor and the power supply. • The operating s...
Page 34 - Switch off the device; Disconnect the mains connector to isolate the device from mains.; Notes on operation; Burner/DVD player software; should be verified after every burning session.
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 7-2 Operating Instructions, Edition 09/2005, A5E00432875-01 Switch off the device Note On a Windows platform, always shut down the PC by clicking Start > Close. Press the on/off button behind the front panel door. The green power LED is s...
Page 35 - DVD burner; Burner software; CD in the drive, run setup and follow the instructions on the screen.; Notes on burning optical data carriers
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 7-3 7.3.2 DVD burner The DVD burner drive is an optional feature. Recording methods supported by the disk drive: Disc-at-once, Track-at-once, Session-at-once, Packet writing. CD-R, CD-R...
Page 36 - Removable hard disks; Replacing a hard disk; and the device status displays are off.; the hard disk cartridge with the disk rack.
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 7-4 Operating Instructions, Edition 09/2005, A5E00432875-01 7.3.3 Removable hard disks The removable disk racks can also be hot swapped in connection to RAID1. Replacing a hard disk Caution Hard drives may only be swapped out of the removabl...
Page 37 - RAID system; channel and therefore increases the availability of the system.
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 7-5 7.3.4 RAID system This is a RAID1 system configuration (mirroring with two hard disks). This enables the system to continue to operate when there is a problem with a faulty hard dri...
Page 38 - Functions for RAID system management
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 7-6 Operating Instructions, Edition 09/2005, A5E00432875-01 Functions for RAID system management The preinstalled software of the RAID system offers enhanced functions for using and managing the RAID system. It can be started via "Start ...
Page 39 - software with its RAID device port number.
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 7-7 Comments about faults Notice Input delay Depending on the load on the processor and the hard disk activity at the time, the system may become briefly overloaded when a disk fails du...
Page 41 - means of the RAID software. This is not possible as BIOS level.; Associate new hard drive
Commissioning 7.3 Notes on operation SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 7-9 Please replace the faulty drive with a new one of the same type and capacity. Notice You can exchange the drive without switching the device off (hot swap) on devices with removable...
Page 43 - Integration; Ethernet; data exchange with automation devices such as SIMATIC S7.; Further information
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 8-1 Integration 8 The following options are available for the integration of the device in existing or planned system environments/networks: Ethernet The integrated Ethernet port (10/100/1000 Mbps) can be used for communic...
Page 45 - Functions; Overview of the following monitoring functions; Temperature monitoring
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 9-1 Functions 9 9.1 9.1 Overview of the following monitoring functions The individual functions are implemented: • Temperature monitoring and over/under temperature indication • Watchdog • Fan monitoring Notice The "Sy...
Page 46 - function; Fan monitoring
Functions 9.3 Watchdog (WD) SIMATIC Rack PC IL 43 9-2 Operating Instructions, Edition 09/2005, A5E00432875-01 9.3 9.3 Watchdog (WD) function The watchdog monitors the program execution and reports a program crash to the user by means of various reactions. You can find additional information on the s...
Page 47 - Expansions and configuration; Open the device; Tools; Isolate the device from mains.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 10-1 Expansions and configuration 10 10.1 10.1 Open the device Caution Work on the open device may only be carried out by authorized and qualified personnel. The device must always be kept closed, otherwise device safety c...
Page 50 - Memory expansion; Notes on the modules; modules may not exceed 25W in total.
Expansions and configuration 10.2 Memory expansion SIMATIC Rack PC IL 43 10-4 Operating Instructions, Edition 09/2005, A5E00432875-01 10.2 10.2 Memory expansion Memory expansion options The motherboard is equipped with four slots for memory modules. This allows you to expand the memory capacity of y...
Page 51 - Installing an expansion module; Preparation; Isolate the device from mains; Installing expansion modules
Expansions and configuration 10.3 Installing expansion cards SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 10-5 10.3.2 Installing an expansion module Preparation Isolate the device from mains Installing expansion modules Steps for installing an expansion module: 1 Ope...
Page 52 - Installing disk drives; Options of installing disk drives; Installing and removing a disk drive or removable rack
Expansions and configuration 10.4 Installing disk drives SIMATIC Rack PC IL 43 10-6 Operating Instructions, Edition 09/2005, A5E00432875-01 10.4 10.4 Installing disk drives 10.4.1 Options of installing disk drives The driver carrier module consists of a horizontal and vertical driver carrier. A DVD-...
Page 54 - Disk drive or removable disk rack installation; Installing and removing a hard disk
Expansions and configuration 10.4 Installing disk drives SIMATIC Rack PC IL 43 10-8 Operating Instructions, Edition 09/2005, A5E00432875-01 Disk drive or removable disk rack installation Steps for installing a disk drive in a horizontal drive carrier 1 Slide the disk drive into the carrier from the ...
Page 55 - Maintenance and service; Removing and installing hardware components; Carrying out repairs; Limitation of Liability; components of other manufacturers.; and TORX T15 screwdrivers as well as a side-cutter.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-1 Maintenance and service 11 11.1 11.1 Removing and installing hardware components 11.1.1 Repairs Carrying out repairs Only authorized personnel are permitted to repair the device. Warning Unauthorized opening and impro...
Page 56 - Replacing the backup battery; recommended by the manufacturer.
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 11-2 Operating Instructions, Edition 09/2005, A5E00432875-01 11.1.2 Replacing the backup battery To be noted before you replace the battery Caution Risk of damage! The lithium battery may only be replaced ...
Page 57 - Removing the power supply module
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-3 11.1.3 Removing the power supply module Warning Only qualified personnel is authorized to exchange the power supply module. Preparation 1. Unplu...
Page 58 - Removing the motherboard
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 11-4 Operating Instructions, Edition 09/2005, A5E00432875-01 11.1.4 Removing the motherboard Preparation 1. Unplug the device from mains and disconnect all cables. 2. Open the device. Removing the motherbo...
Page 59 - Remove filter and device fan; Preparing for equipment fan exchange; Unplug the device from mains.; Remove filter and fan
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-5 11.1.5 Remove filter and device fan Preparing for equipment fan exchange Unplug the device from mains. Remove filter and fan Filter meshes are a...
Page 60 - Installing the fan; Processor replacement
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 11-6 Operating Instructions, Edition 09/2005, A5E00432875-01 Installing the fan Notice Always install a fan of the same type! Caution Ensure that the arrow on the fan points away from the fan bracket. 11.1...
Page 61 - more information contact your local Siemens representative.
Maintenance and service 11.1 Removing and installing hardware components SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-7 How to remove the processor 4. Unlock the CPU socket and lift off socket cover. 5. Remove processor. Additional instructions can be found in the...
Page 62 - Reinstalling the software; General installation procedure; Documentation and Drivers CD or the Restore DVD.; Documentation and Drivers CD:; Contains the documentation and the hardware drivers.; Restoring the Factory State of the Software Using the Restore DVD; Retrieving an authorization or license key from the hard disk; the procedure described below if this is possible.
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 11-8 Operating Instructions, Edition 09/2005, A5E00432875-01 11.2 11.2 Reinstalling the software 11.2.1 General installation procedure In case of software errors, you can reinstall your software using the Recovery CD, the D...
Page 63 - Installing Windows; Booting with the CD Recovery
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-9 Caution With the option "Restore system partition only", all data on drive C: (System) will be deleted. All data, user settings and all authorizations or ...
Page 64 - Setting up the partitions for Windows operating systems; hard disk; Setting up partitions; functions window is displayed.
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 11-10 Operating Instructions, Edition 09/2005, A5E00432875-01 11.2.3.1 Setting up the partitions for Windows operating systems After you have installed a new hard disk, or if partitions are faulty, or when you wish to chang...
Page 65 - the Recovery functions window is displayed.
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-11 Format primary partition 1. Boot from the Recovery CD to format the partitions. Follow the screen instructions until the Recovery functions window is displayed. ...
Page 66 - Information for systems with RAID or RAID controllers (optional); Copy the corresponding driver to an empty floppy disk.; Setting up the language selection for Windows 2000 MUI
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 11-12 Operating Instructions, Edition 09/2005, A5E00432875-01 Note If you are using Microsoft Windows as a professional user, you should have the following manuals available (not supplied): Microsoft Windows 2000 Profession...
Page 67 - Installing drivers and software; reset to US English.; START; Select the operating system in
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 11-13 11.2.5 Language selection on Windows XP Professional and Windows Server 2003 The Multilanguage User Interface (MUI) allows you to set up the Windows menus and di...
Page 68 - Installing the RAID Controller software
Maintenance and service 11.2 Reinstalling the software SIMATIC Rack PC IL 43 11-14 Operating Instructions, Edition 09/2005, A5E00432875-01 11.2.7 Installing the RAID Controller software The procedure for installing the software can be found in the user manual on the supplied "Documentation and D...
Page 69 - Troubleshooting; General problems
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 12-1 Troubleshooting 12 12.1 12.1 General problems This chapter provides you with tips on how to localize and troubleshoot frequently occurring problems. Problem Possible cause To correct or avoid error There is no power s...
Page 70 - Problems when using modules of third-party manufacturers
Troubleshooting 12.2 Problems when using modules of third-party manufacturers SIMATIC Rack PC IL 43 12-2 Operating Instructions, Edition 09/2005, A5E00432875-01 Problem Possible cause To correct or avoid error The USB ports are disabled in your BIOS. Use a different USB port or enable the port. USB ...
Page 71 - Technical data; General specifications
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 13-1 Technical data 13 13.1 13.1 General specifications General technical data Order numbers 6AG4011-2...(for details, refer to the ordering documentation) Dimensions 430.4x177.4x444.4 (WxHxD in mm). Detailed dimensional s...
Page 75 - Power requirements of components (maximum values); Standard system; AC voltage supply; Output voltage
Technical data 13.2 Power requirements of components (maximum values) SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 13-5 13.2 13.2 Power requirements of components (maximum values) Standard system Component Voltage +5 V +3,3 V +12 V -12 V 5 Vaux FSC D2156-S motherboar...
Page 76 - Technical data of the telescopic rails
Technical data 13.4 Technical data of the telescopic rails SIMATIC Rack PC IL 43 13-6 Operating Instructions, Edition 09/2005, A5E00432875-01 13.4 13.4 Technical data of the telescopic rails Ultimate load per pair Minimum 30 kg Full extraction length Minimum 470 mm Rail thickness Maximum 9.7 mm Fixi...
Page 77 - Dimensional drawings; Dimensional drawing of the device
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 14-1 Dimensional drawings 14 14.1 14.1 Dimensional drawing of the device 48319.01 465.118.31 mmInch Dimensions: 433.5 17.06 oben bei senkrechtem Einbau oben bei senkrechtem Einbau 6.94 176.5 4 101.6 19.39 492.54 17.68 449....
Page 78 - Dimensional drawing for the use of telescopic rails; Dimensional drawings for the installation of expansion modules
Dimensional drawings 14.2 Dimensional drawing for the use of telescopic rails SIMATIC Rack PC IL 43 14-2 Operating Instructions, Edition 09/2005, A5E00432875-01 14.2 14.2 Dimensional drawing for the use of telescopic rails mm Inch Dimensions: Dimensions for telescopicrails by the company Rittaltype ...
Page 79 - Detailed descriptions; Motherboard
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 15-1 Detailed descriptions 15 15.1 15.1 Motherboard The motherboard consists of the processor and the chipset, four slots for memory modules, internal and external ports, the Flash BIOS and the backup battery. You will fin...
Page 80 - BIOS Setup; menus and setting options offered by the BIOS setup.
Detailed descriptions 15.3 BIOS Setup SIMATIC Rack PC IL 43 15-2 Operating Instructions, Edition 09/2005, A5E00432875-01 15.3 15.3 BIOS Setup You can configure the system functions and hardware configuration in the BIOS. The factory BIOS settings of the Rack PC deviate from the default BIOS settings...
Page 81 - Appendix; Guidelines and declarations; can provide these on request.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 A-1 A Appendix A A.1 A.1 Guidelines and declarations Notes on the CE Label The following applies to the SIMATIC product described in this documentation: EMC Guidelines This product fulfills the requirements for the EC dire...
Page 82 - Certificates and approvals; Software License Agreement; Safety
Appendix A.2 Certificates and approvals SIMATIC Rack PC IL 43 A-2 Operating Instructions, Edition 09/2005, A5E00432875-01 A.2 A.2 Certificates and approvals DIN ISO 9001 certificate The quality assurance system for the entire product process (development, production, and marketing) at Siemens fulfil...
Page 84 - Service and support; Further support; Request available under
Appendix A.3 Service and support SIMATIC Rack PC IL 43 A-4 Operating Instructions, Edition 09/2005, A5E00432875-01 A.3 A.3 Service and support Further support If you have any further questions relating to the products described in this documentation, contact your local representative at the SIEMENS ...
Page 85 - The Newsletter contains the latest information on your products.
Appendix A.3 Service and support SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 A-5 Service & Support on the Internet In addition to our documentation services, you can also make use of all our online knowledge base on the Internet. http://www.siemens.com/asis Ther...
Page 86 - Retrofitting instructions
Appendix A.4 Retrofitting instructions SIMATIC Rack PC IL 43 A-6 Operating Instructions, Edition 09/2005, A5E00432875-01 A.4 A.4 Retrofitting instructions Below you will find a description of the permissible configuration versions of the Rack PC IL 43 with drives and processors, and the resultant op...
Page 87 - ESD Guidelines; What does ESD mean?; become apparent after a long period of operation.
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 B-1 B ESD Guidelines B B.1 B.1 ESD Guidelines What does ESD mean? All electronic modules are equipped with highly integrated modules or components. Based on their design, these electronic components are highly sensitive to...
Page 88 - Electrical charge; These values correspond with specifications to IEC 801-2.; Ensure good equipotential bonding:
ESD Guidelines B.1 ESD Guidelines SIMATIC Rack PC IL 43 B-2 Operating Instructions, Edition 09/2005, A5E00432875-01 Electrical charge Anyone who is not connected to the electrical potential of their surroundings can be electrostatically charged. The figure below shows the maximum electrostatic volta...
Page 89 - Abbreviations
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 C-1 C Abbreviations C C.1 C.1 Abbreviations Abbreviation Term Definition AC Alternating current Alternating current ACPI Advanced Configuration and Power Interface Configuration interface, allows the operating system contr...
Page 97 - Glossary; Application; manage both the current and the previous versions on the hard disk.; Base memory; changed even if the memory is extended.; Baud
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 Glossary-1 Glossary Application An application is a program which builds directly on the MS-DOS / Windows operating system. Applications on your PG or PC, for example, are STEP 7, STEP 7-Micro/WIN. ATAPI CD–ROM Drive AT-Bu...
Page 100 - family can be converted to the usual 25-pin male connector.
Glossary SIMATIC Rack PC IL 43 Glossary-4 Operating Instructions, Edition 09/2005, A5E00432875-01 Ethernet Local network (bus structure) for text and data communication with a transfer rate of 10 Mbps. Formatting Basic partitioning of memory space on a magnetic data carrier into track and segments. ...
Page 102 - interfaces and device I/Os are controlled and managed.
Glossary SIMATIC Rack PC IL 43 Glossary-6 Operating Instructions, Edition 09/2005, A5E00432875-01 Motherboard The motherboard is the core of the computer. Here, data are processed and stored, and interfaces and device I/Os are controlled and managed. Operating system Summarizing term describing all ...
Page 104 - The two sessions are written to at once (as in disc at once).
Glossary SIMATIC Rack PC IL 43 Glossary-8 Operating Instructions, Edition 09/2005, A5E00432875-01 Serial interface Data is transmitted one bit at a time via a serial port. They are used in all applications requiring minimum wiring and data transfer across greater distances. Session at once In sessio...
Page 105 - operation with a pointer device such as a mouse.; WLAN; computers in the office or in factory environments.
Glossary SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 Glossary-9 Windows Microsoft Windows is a multitasking graphical user interface. Windows provides a standard graphical interface based on drop-down menus, windowed regions on the screen, and allows operation with ...
Page 107 - Index
SIMATIC Rack PC IL 43 Operating Instructions, Edition 09/2005, A5E00432875-01 Index-1 Index 5 5.25" mounting bays, 10-6 A Abbreviations, C-1 Angle brackets, 5-1 Mounting methods, 5-1 Approvals, 4-3 Assignment Resources, 10-4 Authorization, 11-8 B Backup battery, 11-2 Removal, 11-2 Battery, 2-2 B...
Page 110 - Unpacking
Index SIMATIC Rack PC IL 43 Index-4 Operating Instructions, Edition 09/2005, A5E00432875-01 Unpacking Unpacking the device, 4-1 USB, 13-4 Interfaces, 3-4, 3-8 Technical Data, 13-4 V Ventilation slits, 4-3 VGA Interfaces, 3-4 W Warranty, 2-1 Watchdog, 9-2 Status displays, 3-9 Watchdog Monitoring func...
Page 112 - Siemens AG; Automation and Drives
Siemens AG Automation and Drives Industrial Automation Systems Postfach 4848 90437 NUERNBERG Federal Republic of Germany www.siemens.de/automation ,'$(
Siemens HF35M630/01
User Manual
Siemens 1015N-2MFM-1A
Manual
Siemens 108
User Manual
Siemens 11
User Manual
Siemens 1168
User Manual
Siemens 120 Series
User Manual
Siemens 125-1957
User Manual
Siemens 125-3584T
User Manual
Siemens 125-5033
User Manual
Siemens 140
User Manual
Siemens 175V
User Manual
Siemens 18inc Freezer Tower with Dispenser
User Manual
Siemens 18inc Wine Tower
User Manual
Siemens 1G03QB 630G
User Manual
Siemens 2 D SP
User Manual
Siemens 2000
User Manual
Siemens 2010 Tango
User Manual