Siemens Simatic 620 - Manuals

Page 3 - iii; Preface; Purpose of the Manual; Certifications; The device fulfils the following guidelines and certifications:; Standards and Approvals; Programming with STEP 7

iii SIMATIC Box PC 620 Manual A5E00131465-01 Preface Purpose of the Manual This manual contains all the information you need for commissioning and using theSIMATIC Box PC 620. It is intended both for programming and testing/debugging personnel whocommission the device itself and connect it with othe...

Page 4 - Structure of the Manual

Preface iv SIMATIC Box PC 620 Manual A5E00131465-01 Structure of the Manual In Chapters 1 to 4 the manual contains the most important instructions for startingup and using the Box PC 620. Chapters 5 to 9 are reference sections you will onlyrequire in special cases. Important Information This chapter...

Page 5 - Glossary; The glossary explains important terms.; Alphabetical Index; Further Support; Training Center; SIMATIC Documentation on the Internet; You will find the documentation on the internet at:

Preface v SIMATIC Box PC 620 Manual A5E00131465-01 Glossary The glossary explains important terms. Alphabetical Index The index will enable you to quickly find passages in the text pertaining toimportant keywords. Conventions The abbreviation Box PC oder device is also used within this manual for th...

Page 7 - Service & Support on the Internet; where you will find the following:

Preface vii SIMATIC Box PC 620 Manual A5E00131465-01 Service & Support on the Internet In addition to our documentation, we offer our Know-how online on the internet at: http://www.ad.siemens.de/support where you will find the following: Current Product Information leaflets, FAQs (Frequently Ask...

Page 9 - Table of contents

ix SIMATIC Box PC 620 Manual A5E00131465-01 Table of contents Preface iii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Information 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 10 - SIMATIC Box PC 620 Expansions

Table of contents x SIMATIC Box PC 620 Manual A5E00131465-01 4 SIMATIC Box PC 620 Expansions 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Opening the Unit 4-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4....

Page 13 - Important Information; Safety Instructions; Caution; relevant safety instructions.; Installation; Please observe the notes on ambient conditions in Appendix B; Warning

1-1 SIMATIC Box PC 620 Manual A5E00131465-01 Important Information 1.1 Safety Instructions ! Caution The safety instructions given on the reverse of the title page of this manual must be observed. Before expanding your Box PC refer to Chapter 4 and read the relevant safety instructions. This device ...

Page 14 - Power Connection; Warnung

Important Information 1-2 SIMATIC Box PC 620 Manual A5E00131465-01 Power Connection Install the cables so that no one can step on them or trip over them. When youconnect the device, adhere to the relevant instructions in Chapter 2 of this manual. Do not connect or disconnect power supply cables and ...

Page 15 - Country-Specific Information; For the United States and Canada:; Repairs; Only authorized personnel are permitted to repair the Box PC.

Important Information 1-3 SIMATIC Box PC 620 Manual A5E00131465-01 Country-Specific Information For the United States and Canada: In the United States and Canada USA, a CSA or UL-listed power supply cablemust be used. The male plug is a 5-15 style. For operation with 120 V: Use a UL Listed, CSA Labe...

Page 16 - Battery; Notes on Inserting and Removing Modules (ESG Guidelines); Devices and tools must be free of static electricity.

Important Information 1-4 SIMATIC Box PC 620 Manual A5E00131465-01 Battery There is a battery in this device on the motherboard. Batteries may only beexchanged by technical personnel. Observe the local regulations on disposal of special waste when disposing of deadbatteries. ! Caution There is the d...

Page 17 - Certificates, Directives and Declarations; EMC Directive; Devices with a; power supply performance of 85W; power supply performance of 105W; are in accordance with the; Low Voltage Directive

Important Information 1-5 SIMATIC Box PC 620 Manual A5E00131465-01 1.2 Certificates, Directives and Declarations Notes on the CE Symbol The following applies to the SIMATIC product described in this manual: EMC Directive Devices with a power supply performance of 85W are in accordance with the EU Di...

Page 18 - Declaration of Conformity; Observing the Setup Guidelines; Peripheral devices are; Software License Agreement

Important Information 1-6 SIMATIC Box PC 620 Manual A5E00131465-01 Declaration of Conformity The EC declarations of conformity and the documentation relating to this areavailable to the authorities concerned, according to the above EC directive, from: Siemens AG Group Automation & Drives A&D...

Page 19 - Certification for the USA, Canada and Autralia; Security; US

Important Information 1-7 SIMATIC Box PC 620 Manual A5E00131465-01 1.3 Certification for the USA, Canada and Autralia Security One of the following markings on a device is indicative of the correspondingapproval: Underwriters Laboratories (UL) to the UL 1950 Standard (I.T.E) or to the UL508 (IND.CON...

Page 20 - EMC; Canada; Australia

Important Information 1-8 SIMATIC Box PC 620 Manual A5E00131465-01 EMC USA Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are ...

Page 21 - Transport; Transporting; Use the; original packing; if you have to ship the Box PC from one

Important Information 1-9 SIMATIC Box PC 620 Manual A5E00131465-01 1.4 Transport Transporting Despite the fact that the Box PC is of rugged design, its internal components aresensitive to severe vibrations or shock. You must therefore protect the PC fromsevere mechanical stress when transporting it....

Page 23 - Welcome to the SIMATIC Box PC 620; Overview of Chapter; In chapter

2-1 SIMATIC Box PC 620 Manual A5E00131465-01 Welcome to the SIMATIC Box PC 620 Overview of Chapter In chapter you will find on page 2.1 Port Side View 2-2 2.2 Drive Side View 2-4 2.3 Side View 2-5 2.4 Bottom View 2-6 2.5 Ports 2-7 2.6 Drives 2-8 2.7 Backup Battery 2-12 2

Page 24 - Port Side View; Internal slots for expansion modules.

Welcome to the SIMATIC Box PC 620 2-2 SIMATIC Box PC 620 Manual A5E00131465-01 2.1 Port Side View 1 2 3 4 5 6 7 8 9 10 11 12 13 Figure 2-1 Ports 1 Mouse PS/2 socket for connecting a PS/2 mouse. 2 COM1 V.24 /MODEM /AG The COM 1 (TTY) port is used to connect, for example, S5 automation units (AG).The ...

Page 25 - You can connect an external VGA monitor to this connector.; thereby improve the electrical shielding.

Welcome to the SIMATIC Box PC 620 2-3 SIMATIC Box PC 620 Manual A5E00131465-01 8 Ethernet RJ 45-Ethernet connector. Ethernet is a local network with a bus structure for datacommunication with a data transfer rate of 10 or 100 megabit per second (Mbps). 9 PROFIBUS/MPI (optional) You can connect the B...

Page 26 - Drive Side View; Here are openings for device ventilation.; I/O port for the connection of front components

Welcome to the SIMATIC Box PC 620 2-4 SIMATIC Box PC 620 Manual A5E00131465-01 2.2 Drive Side View 1 2 4 3 5 Figure 2-2 Drive Side View 1 Device Fan Here are openings for device ventilation. Caution The air venting slots for outgoing air must not be obstructed. Otherwise, there is a risk of overheat...

Page 27 - Bottom View

Welcome to the SIMATIC Box PC 620 2-5 SIMATIC Box PC 620 Manual A5E00131465-01 2.3 Bottom View 1 Figure 2-3 Bottom View 1 Equipotential Grounding The connection with the equipotential grounding on the system housing to thecentral earth terminal of the cabinet or the unit into which the computer is f...

Page 28 - Side View

Welcome to the SIMATIC Box PC 620 2-6 SIMATIC Box PC 620 Manual A5E00131465-01 2.4 Side View 2 3 1 Figure 2-4 Side View 1 Mounting possibilities for the WinAC Backup Battery You can mount the SIMATIC WinAC CPU41x-2PCI backup battery here. Use thebattery holder without a slot plate supplied with the ...

Page 29 - Ports; Front Ports; VGA Port; Notice

Welcome to the SIMATIC Box PC 620 2-7 SIMATIC Box PC 620 Manual A5E00131465-01 2.5 Ports Front Ports The front ports are located behind the cover below the floppy disk drive. They areused for connection of the following front elements: I/O port for the connection of front components LVDS display por...

Page 30 - Drives; Types of Diskette; You can use following diskettes:; double sided double; LS 240 Drive (Depending on Device Configuration); disks can also be processed.

Welcome to the SIMATIC Box PC 620 2-8 SIMATIC Box PC 620 Manual A5E00131465-01 2.6 Drives The Box PC is equipped as standard with a 3.5” disk drive or an LS240 drive and a3.5” hard disk drive. 2.6.1 Disk Drive (Depending on the Device Configuration) You can store programs and data on diskettes with ...

Page 31 - Handling Disks with the LS 240 Drive; the permissible values in the technical data in Section B.; Information on the LS240 Disk Drive; remember that these are not fully supported by the Windows 98 and

Welcome to the SIMATIC Box PC 620 2-9 SIMATIC Box PC 620 Manual A5E00131465-01 Handling Disks with the LS 240 Drive Depending on the fitting position, the disks are inserted into the disk drive asillustrated below: Access hole for emergency ejection (only LS240) Ejector Ejector Access LED Access LED...

Page 32 - Authorization with Authors W V2.x; Usage Notes for LS240 Superdisks

Welcome to the SIMATIC Box PC 620 2-10 SIMATIC Box PC 620 Manual A5E00131465-01 Authorization with Authors W V2.x To authorize STEP 7 and other SIMATIC components you must use AuthorsW.Start this program on the PG via the taskbar under Start > Simatic > AuthorsW. Usage Notes for LS240 Superdis...

Page 33 - Hard Disk Drive; Operation; light on the drive starts to flash:

Welcome to the SIMATIC Box PC 620 2-11 SIMATIC Box PC 620 Manual A5E00131465-01 2.6.3 Hard Disk Drive The hard disk drive is used for the storage of large quantities of data. it is fitted in amounting which is easily exchangeable and damped against vibration. ! Caution Risk of loss of data and damag...

Page 34 - Additional Software; Backup Battery

Welcome to the SIMATIC Box PC 620 2-12 SIMATIC Box PC 620 Manual A5E00131465-01 Additional Software To be attain the full functionality of the CD RW/DVD ROM drive, additional soft-ware (DVD player or burner software) is necessary. You can find it on the CD inclu-ded in the delivery of the device. To...

Page 35 - Setting Up and Operating the; Chapter Overview

3-1 SIMATIC Box PC 620 Manual A5E00131465-01 Setting Up and Operating the SIMATIC Box PC 620 Chapter Overview In chapter you will find on page 3.1 Unpacking and Checking the Scope of Delivery 3-2 3.2 Installing the SIMATIC Box PC 620 3-3 3.3 Preparing for Operation 3-10 3.4 Connecting Peripheral Dev...

Page 36 - Setting Up and Operating the SIMATIC Box PC 620; Unpacking and Checking the Scope of Delivery; Unpacking the SIMATIC Box PC 620; serial number; Enter the Microsoft Windows “Product Key” from the “Certificate of

Setting Up and Operating the SIMATIC Box PC 620 3-2 SIMATIC Box PC 620 Manual A5E00131465-01 3.1 Unpacking and Checking the Scope of Delivery Unpacking the SIMATIC Box PC 620 Unpack your Box PC as follows: 1. Remove the Box PC from the packaging.2. Do not throw the original packing away. Keep it in ...

Page 37 - Installing the SIMATIC Box PC 620; with AC power supply; meets the requirements for a fire; with DC power supply; Please note the following points when installing the PC:

Setting Up and Operating the SIMATIC Box PC 620 3-3 SIMATIC Box PC 620 Manual A5E00131465-01 3.2 Installing the SIMATIC Box PC 620 The Box PC 620 can be operated in several fitting positions. It is particularlysuitable for fitting in consoles, switch boards and control panels. The Box PC 620 with AC...

Page 38 - Instructions for wall and ceiling mounting; will find the required dimension drawings on the following pages.

Setting Up and Operating the SIMATIC Box PC 620 3-4 SIMATIC Box PC 620 Manual A5E00131465-01 Depending on the configuration of the device, two mounting brackets are includedin the scope of delivery. You can attach these to the housing with 6 screws (M3x6). M4 thread, max. depth of engagement 5 mm M3...

Page 42 - An inclined position of

Setting Up and Operating the SIMATIC Box PC 620 3-8 SIMATIC Box PC 620 Manual A5E00131465-01 Permissible Fitting Positions of the PC to UL1950/EN60950/CSA22.2 No. 950 An inclined position of ± 20 is allowed in each of the permissible fitting positions. Position 1 (Preferred Position) Position 2 *) P...

Page 43 - Position 5

Setting Up and Operating the SIMATIC Box PC 620 3-9 SIMATIC Box PC 620 Manual A5E00131465-01 Additional Permissible Fitting Positions of the PC to UL508/CSA 22.2 No. 142 An inclined position of $ 15 is allowed in each of the permissible fitting positions. An external fire protection housing is not n...

Page 44 - Preparing for Operation; Connection to the Power Supply Unit; AC; The; DC; -power supply unit of the Box PC 620 is designed for 24V systems.

Setting Up and Operating the SIMATIC Box PC 620 3-10 SIMATIC Box PC 620 Manual A5E00131465-01 3.3 Preparing for Operation Connection to the Power Supply Unit Connection to power supplyInlet connector for non- heating appliances Figure 3-5 Connection to Power Supply (Inlet Connector for Non-Heating A...

Page 45 - Equipotential Measures; If you are working with Windows, you always have to use

Setting Up and Operating the SIMATIC Box PC 620 3-11 SIMATIC Box PC 620 Manual A5E00131465-01 Equipotential Measures Low-impedance ground connections ensure that faults arising from external powersupply cables, signalling cables or cables to peripheral units are diverted. Therefore connect the equip...

Page 46 - Connecting Peripheral Devices; Connecting the Printer to the Parallel Port; Proceed as follows to connect your printer:

Setting Up and Operating the SIMATIC Box PC 620 3-12 SIMATIC Box PC 620 Manual A5E00131465-01 3.4 Connecting Peripheral Devices Notice When connecting peripheral units, ensure that the components have industrial capability. Connecting the Printer to the Parallel Port Proceed as follows to connect yo...

Page 47 - Connecting the Printer to the Serial Port; Connecting the Monitor

Setting Up and Operating the SIMATIC Box PC 620 3-13 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting the Printer to the Serial Port You can also connect your printer to the SIMATIC Box PC using a serial COM port.You will find information on how to adapt and set your interface and which connect-i...

Page 48 - Using a Mouse; You can connect both a PS/2-USB and a serial mouse to the Box PC.; Connecting a PS/2 Mouse; To connect the mouse, proceed as follows:; Connecting a Serial Mouse

Setting Up and Operating the SIMATIC Box PC 620 3-14 SIMATIC Box PC 620 Manual A5E00131465-01 Using a Mouse You can connect both a PS/2-USB and a serial mouse to the Box PC. Connecting a PS/2 Mouse You can connect an external PS/2 mouse or another external pointing device to anadditional PS/2-compat...

Page 49 - Connecting a PS/2 Keyboard; A PS/2 keyboard of your choice can be connected to the Box PC.; To connect the keyboard, proceed as follows:; Note; that the connector does not obscure adjacent ports.

Setting Up and Operating the SIMATIC Box PC 620 3-15 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting a PS/2 Keyboard A PS/2 keyboard of your choice can be connected to the Box PC. PS/2 keyboard connection Figure 3-9 Connecting a PS/2 Keyboard To connect the keyboard, proceed as follows: 1. Disco...

Page 50 - Connecting Devices to an USB Interface; the USB interface via adapter.

Setting Up and Operating the SIMATIC Box PC 620 3-16 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting Devices to an USB Interface You can connect single or multiple USB devices (mouse, keyboard or printer) tothe USB interfaces. 1. Plug the USB device cable into one of the USB interfaces.The Plug ...

Page 51 - Working with PC Cards; PC Cards; The following is to be observed when working with cardbus/PC cards:; toward the rear of the programming

Setting Up and Operating the SIMATIC Box PC 620 3-17 SIMATIC Box PC 620 Manual A5E00131465-01 3.5 Working with PC Cards PC Cards The PC card interface supports Cardbus-Cards (32 Bit) and PCMCIA-Cards(16 Bit). The Box PC has one PC card port. You can plug communication mod-ules for MODEM, FAX-MODEM, ...

Page 52 - spin up 2 s; Installing PC Cards

Setting Up and Operating the SIMATIC Box PC 620 3-18 SIMATIC Box PC 620 Manual A5E00131465-01 Note Peak currents of 650 mA at 5 V based on 3 s are permitted! Examples of PCMCIA cards connected to PC card interface for Hard Disk 330 mA read/write (Maxtor MXL-131-III) 640 mA spin up 2 s . . . . . 110 ...

Page 53 - Connecting the SIMATIC Box PC 620 to other SIMATIC S5; A TTY connection (optional product feature)

Setting Up and Operating the SIMATIC Box PC 620 3-19 SIMATIC Box PC 620 Manual A5E00131465-01 3.6 Connecting the SIMATIC Box PC 620 to other SIMATIC S5 Point-To-Point Connection In this section, you will learn how to connect your SIMATIC Box PC 620 to aprogramming device or S5 programmable logic con...

Page 54 - Box PC; You connect your; wrong connecting cables.; Make sure the TTY cable of the SIMATIC Box PC 620is plugged into the

Setting Up and Operating the SIMATIC Box PC 620 3-20 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting the SIMATIC Box PC 620 to an S5 Programmable Logic Controller You can connect the Box PC to a SIMATIC S5 programmable logic controller usingthe COM1/TTY interface port. COM 1 (socket) Figure 3-12...

Page 55 - Connecting the SIMATIC Box PC 620 via an Adapter; Interface

Setting Up and Operating the SIMATIC Box PC 620 3-21 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting the SIMATIC Box PC 620 via an Adapter The connecting cable 6ES5 734-2BD20 is supplied with the Box PC. An adapter isavailable for connecting the programmable controller using old standard cables....

Page 56 - ing cable is described in Chapter 7.

Setting Up and Operating the SIMATIC Box PC 620 3-22 SIMATIC Box PC 620 Manual A5E00131465-01 SIMATIC Box PC 620 to PG Connection (V.24, TTY) If you want to connect your Box PC to another programming device, you can plugthe appropriate connecting cable into the V.24 or TTY interface port Tabelle 3-2...

Page 57 - plate for the interfaces on the left-hand side panel.

Setting Up and Operating the SIMATIC Box PC 620 3-23 SIMATIC Box PC 620 Manual A5E00131465-01 3.7 Connecting the SIMATIC Box PC 620 to a SIMATIC S7 Network(PROFIBUS/MPI) Connecting an S7 Programmable Controller via PROFIBUS/MPI Interface You can connect the SIMATIC Box PC 620 to a SIMATIC S7 automat...

Page 58 - Connecting; Via the PROFIBUS/MPI interface, you can connect your PC to

Setting Up and Operating the SIMATIC Box PC 620 3-24 SIMATIC Box PC 620 Manual A5E00131465-01 Connecting Via the PROFIBUS/MPI interface, you can connect your PC to MPI networks (S7-200, S7-300, and S7-400) or PROFIBUS DP networks (DP components). PROFIBUS/MPI Network Up to 32 devices (PC, programmin...

Page 59 - Networking the Box PC on PROFIBUS

Setting Up and Operating the SIMATIC Box PC 620 3-25 SIMATIC Box PC 620 Manual A5E00131465-01 3.8 Networking the SIMATIC Box PC 620 with Other Stations onPROFIBUS Networking the Box PC on PROFIBUS PROFIBUS is an open and robust bus system for industrial use. It can be used toconfigure networks with ...

Page 60 - Networking Box PC via RJ45 Ethernet Interface; A Class 5 Ethernet cable is required for operation with 100 Mbaud.; Connection under Windows

Setting Up and Operating the SIMATIC Box PC 620 3-26 SIMATIC Box PC 620 Manual A5E00131465-01 3.9 Ethernet (RJ45 Ethernet Interface) Networking Box PC via RJ45 Ethernet Interface The RJ45 Ethernet interface is a Twisted-Pair (TP) Interface for data transfer ratesof 10/100 Mbaud. This on-board interf...

Page 61 - What Does This Chapter Contain?

4-1 SIMATIC Box PC 620 Manual A5E00131465-01 SIMATIC Box PC 620 Expansions What Does This Chapter Contain? You can enhance the performance of your Box PC by adding additional memory.This chapter describes how to expand your PC. Please observe the relevant safetyguidelines. Chapter Overview In chapte...

Page 62 - Opening the Unit; Limitation of Liability

SIMATIC Box PC 620 Expansions 4-2 SIMATIC Box PC 620 Manual A5E00131465-01 4.1 Opening the Unit 4.1.1 Prerequisites The device is designed for easy maintenance so that any work that is necessarycan be done quickly and at low cost. ! Caution The electronic components on the printed circuit boards are...

Page 63 - Before Opening the Unit

SIMATIC Box PC 620 Expansions 4-3 SIMATIC Box PC 620 Manual A5E00131465-01 Before Opening the Unit Note the following rules before opening the unit: Before you disconnect the power supply cable, discharge any electrostatic charge on your body. You can do this by touching the metal mounting plate for...

Page 64 - Opening the SIMATIC Box PC 620; to be removed are inaccessible in the fitted position).

SIMATIC Box PC 620 Expansions 4-4 SIMATIC Box PC 620 Manual A5E00131465-01 4.1.2 Opening the SIMATIC Box PC 620 To open the Box PC, proceed as follows: 1. Pull out the power supply connector, and remove all connecting cables from the unit, including the keyboard cable. 2. Remove the PC from its moun...

Page 65 - Components Visible After Opening the Unit; Components

SIMATIC Box PC 620 Expansions 4-5 SIMATIC Box PC 620 Manual A5E00131465-01 4.1.3 Components Visible After Opening the Unit Components Once you have removed the top cover of your unit, the components are visible. Power supply unit Floppy drive or LS 240 Processor Bus board Memory extension Fan Figure...

Page 66 - The Motherboard

SIMATIC Box PC 620 Expansions 4-6 SIMATIC Box PC 620 Manual A5E00131465-01 4.1.4 The Motherboard The motherboard is the heart of the Box PC. Here, data is processed and stored,and interfaces and device I/Os are controlled and managed. X44 X400 X402 X401 S1 X1 X20 X19 X700 X29 X28 X128 X71 X70 X10 X5...

Page 67 - Components on the Motherboard; Number; Optional product feature

SIMATIC Box PC 620 Expansions 4-7 SIMATIC Box PC 620 Manual A5E00131465-01 Components on the Motherboard The following components are located on the motherboard of the Box PC 620 V2: Number Functions X1 Processor module with heat sink X3 IDE connector for CD-ROM X4 IDE connector for 2.5 “ hard disk ...

Page 68 - Installing Memory Expansion Submodules; Standard Memory; Either one or two modules can be installed.; Memory

SIMATIC Box PC 620 Expansions 4-8 SIMATIC Box PC 620 Manual A5E00131465-01 4.2 Installing Memory Expansion Submodules Standard Memory The motherboard has 2 slots for 144 pin SO DIMM memory submodules. This allows you to expand the memory capacity of your Box PC 620 to a maximum of512 Mbytes. Either ...

Page 69 - Installing the SO DIMM Cards; To plug in expansion submodules, proceed as follows:

SIMATIC Box PC 620 Expansions 4-9 SIMATIC Box PC 620 Manual A5E00131465-01 ! Caution The electronic components of the printed circuit boards are extremely sensitive to electrostatic discharge. Certain precautionary measures are therefore necessary when handling such components. These measures are ex...

Page 70 - Replacing the Backup Battery; Battery Power Supply for Real-Time Clock and Configuration; To change the battery, proceed as follows:

SIMATIC Box PC 620 Expansions 4-10 SIMATIC Box PC 620 Manual A5E00131465-01 4.3 Replacing the Backup Battery Battery Power Supply for Real-Time Clock and Configuration A backup battery (3.6 V-lithium battery) powers the the real-time clock even afterthe device is switched off. In addition to the tim...

Page 71 - Changing SETUP

SIMATIC Box PC 620 Expansions 4-11 SIMATIC Box PC 620 Manual A5E00131465-01 Backup battery Figure 4-5 Position of the Backup Battery ! Caution Risk of damage!Only replace the lithium battery with an identical battery or with a type recommended by the manufacturer (Order No.: W79084-E1003-B1). Dispos...

Page 72 - Installation of Expansion Cards; Notes about the Cards

SIMATIC Box PC 620 Expansions 4-12 SIMATIC Box PC 620 Manual A5E00131465-01 4.4 Installation of Expansion Cards Notes about the Cards The Box PC is designed for the use with cards as per the AT/PCI specification.Thedimensions of the cards may not exceed the stated dimensions. If the height is ex-cee...

Page 73 - Note about Long PCI Cards

SIMATIC Box PC 620 Expansions 4-13 SIMATIC Box PC 620 Manual A5E00131465-01 174,63 mm 106,68 mm 8,19 mm 6,875” 0.322” 4,2” Figure 4-8 Short PCI Cards (5 V) 265 mm 10,48 ” 106,68 mm 4,2” 8,19 mm 0.322” Figure 4-9 Long PCI Cards (5 V) Note about Long PCI Cards Before long PCI cards can be inserted int...

Page 74 - resting on the guide on the housing.; The slide elements are in the enclosed plastic bag.

SIMATIC Box PC 620 Expansions 4-14 SIMATIC Box PC 620 Manual A5E00131465-01 4.4.1 Removal and Installation of the Device for Holding Down themodules The device for holding down the modules is attached to the housing with a screw.It has three slits, through which the slide elements are inserted. Proc...

Page 75 - Aligning the Holding-Down Device

SIMATIC Box PC 620 Expansions 4-15 SIMATIC Box PC 620 Manual A5E00131465-01 Aligning the Holding-Down Device Proceed as follows to install the holding-down device. 1. Insert the slide element through the guide slit until it is resting firmly on the module. The module must now be introduced into the ...

Page 76 - Removal and Installation of an Expansion Card

SIMATIC Box PC 620 Expansions 4-16 SIMATIC Box PC 620 Manual A5E00131465-01 4.4.2 Removal and Installation of an Expansion Card Proceed as follows: 1. Open the housing as described in Section 4.1.2. Remove all connectors from the expansion card and note the assignment.3. Remove the device for holdin...

Page 77 - Removal and Installation of Drives; part of the mounting. Remove the hard disk drive from the mounting.

SIMATIC Box PC 620 Expansions 4-17 SIMATIC Box PC 620 Manual A5E00131465-01 4.5 Removal and Installation of Drives 4.5.1 Removal and Installation of the Hard Disk Drive 1. Undo the 4 screws on the back of the housing.2. Open the drive holder.3. Detach the drive holder from the mounting and lay the d...

Page 79 - Removal and Installation of a CD ROM Drive; Proceed in the reverse order to fit the new drive.

SIMATIC Box PC 620 Expansions 4-19 SIMATIC Box PC 620 Manual A5E00131465-01 4.5.2 Removal and Installation of a CD ROM Drive Depending on the device equipment, a CD ROM drive is installed in the Box PC. 1. Undo the 2 screws on the back of the housing.2. Remove the cover of the CD ROM drive.3. Undo t...

Page 80 - Removal and Installation of the Floppy Drive; same type as the one removed.

SIMATIC Box PC 620 Expansions 4-20 SIMATIC Box PC 620 Manual A5E00131465-01 4.5.3 Removal and Installation of the Floppy Drive 1. Open the housing as described in Section 4.1.2. Remove the drive holder as described in Section 4.5.1.3. Release the interlock of the controller flex-lead on the motherbo...

Page 81 - Removal and Installation of the LS 240 Drive; motherboard and pull the flex-lead out of the connector assembly.

SIMATIC Box PC 620 Expansions 4-21 SIMATIC Box PC 620 Manual A5E00131465-01 4.5.4 Removal and Installation of the LS 240 Drive The removal and installation of the LS240 drive takes place with the same steps asfor the floppy drive. 1. Open the housing as described in Section 4.1.2. Remove the drive h...

Page 82 - Removal and Installation of the Power Supply Unit; housing

SIMATIC Box PC 620 Expansions 4-22 SIMATIC Box PC 620 Manual A5E00131465-01 4.6 Removal and Installation of the Power Supply Unit 1. Open the system housing as described in Section 4.1.2. Remove the drive holder as described in Section 4.5.1.3. Undo and remove the 3 screws of the cover of the power ...

Page 83 - Removal and Installation of the Bus Board

SIMATIC Box PC 620 Expansions 4-23 SIMATIC Box PC 620 Manual A5E00131465-01 4.7 Removal and Installation of the Bus Board 1. Open the housing as described in Section 4.1.2. Remove all the modules from the slots (proceed as described in Section 4.4.2).3. Remove the drive holder as described in Sectio...

Page 84 - Removal and Installation of the Motherboard

SIMATIC Box PC 620 Expansions 4-24 SIMATIC Box PC 620 Manual A5E00131465-01 4.8 Removal and Installation of the Motherboard 1. Open the housing as described in Section 4.1.2. Remove all the modules from the slots (proceed as described in Section 4.4.2).3. Remove the drive holder as described in Sect...

Page 85 - Removal and Installation of the Device Fan; pressing out the gudgeon from the rear of the rivet shank.; Only a fan of the same type may be fitted!

SIMATIC Box PC 620 Expansions 4-25 SIMATIC Box PC 620 Manual A5E00131465-01 4.9 Removal and Installation of the Device Fan The Box PC is cooled by means of a fan which sucks hot air out of the housing.1. Open the housing as described in Section 4.1.2. Pull off the fan cable connector on the basic bo...

Page 86 - Processor Change; Proceed as follows to exchange the processor:

SIMATIC Box PC 620 Expansions 4-26 SIMATIC Box PC 620 Manual A5E00131465-01 4.10 Processor Change Proceed as follows to exchange the processor: 1. Pull out the fan cable plug.2. Remove the cooling unit which is fixed using a lifting lever.3. Then push the lever in the direction of the arrows (1) and...

Page 87 - Reset Button

SIMATIC Box PC 620 Expansions 4-27 SIMATIC Box PC 620 Manual A5E00131465-01 4.11 Reset Button A hardware reset is initiated by means of the reset button on your device. The PCis restarted. In the Box PC the reset button is on the drive side beside the floppy drive. The re-set button can be only actu...

Page 89 - Configuring the SIMATIC Box PC 620

5-1 SIMATIC Box PC 620 Manual A5E00131465-01 Configuring the SIMATIC Box PC 620 What Does This Chapter Contain? In this chapter, you will learn how to configure your programming device. You needto do this if you change your system by adding, removing, or exchanging expansion modules and memory expan...

Page 90 - Changing the Device Configuration with BIOS SETUP; Changing the Device Configuration; Start BIOS SETUP by pressing; Starting SETUP; PRESS; BIOS SETUP Menus; “Item Specific Help”; part of the relevant menu.

Titel chapter Configuring the SIMATIC Box PC 620 5-2 SIMATIC Box PC 620 Manual A5E00131465-01 5.1 Changing the Device Configuration with BIOS SETUP Changing the Device Configuration Your Box PC device configuration is set for working with the software supplied withthe unit. You should only change th...

Page 91 - Screen Display Following Power On

Configuring the SIMATIC Box PC 620 5-3 SIMATIC Box PC 620 Manual A5E00131465-01 Screen Display Following Power On With the default setting of your PC, the display shown below appears followingpower-on: Phoenix BIOS 4.0 A5E00123801–ES02Copyright 1985-2001 Phoenix Technologies Ltd.All Rights Reserved....

Page 92 - Menu Structure; Menu

Configuring the SIMATIC Box PC 620 5-4 SIMATIC Box PC 620 Manual A5E00131465-01 Menu Structure The screen is divided into four sections. In the top section, you can select themenu screens [Main], [Advanced], [Security], [Power], [Boot Sequence],[Version], [Exit]. In the left of the center section yo...

Page 93 - The Main Menu; Setting in the Main Menu; In the; Main; menu, you can move upwards and downwards using the cursor keys; Field

Configuring the SIMATIC Box PC 620 5-5 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.1 The Main Menu Selectablesubmenu PhoenixBIOS Setup Utility Item Specific Help System Time: ESC Exit <Tab>, <Shift-Tab>, or System Date: Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 ...

Page 94 - System Time und System Date; Uhrzeit und Datum; and the date; Diskette A; Disk drive

Configuring the SIMATIC Box PC 620 5-6 SIMATIC Box PC 620 Manual A5E00131465-01 System Time und System Date Uhrzeit und Datum System Time and System Date indicate the current values. Once you have selected the appropriate option, you can use the [+] and [–] keys to modify the timesetting Hour:Minute...

Page 95 - Primary Slave Secondary Master/ Secondary Slave; “Type” Field; Autodetect

Configuring the SIMATIC Box PC 620 5-7 SIMATIC Box PC 620 Manual A5E00131465-01 Primary Master Primary Slave Secondary Master/ Secondary Slave The system jumps to the following submenu when you select this type of menufield: PhoenixBIOS Setup Utility Item Specific Help Type: ESC Exit Select Item Sel...

Page 96 - “Multi Sector-Transfer” Field; “LBA Mode Control” field; field to; “Transfer Mode” and “Ultra DMA Mode” Fields; field to

Configuring the SIMATIC Box PC 620 5-8 SIMATIC Box PC 620 Manual A5E00131465-01 “Multi Sector-Transfer” Field The entry in the Multi-Sector Transfer field defines the number of sectors transferred per interrupt. The value depends on the drive and should be set only bysetting the Type field to Auto ....

Page 97 - ”Memory Cache” Submenu

Configuring the SIMATIC Box PC 620 5-9 SIMATIC Box PC 620 Manual A5E00131465-01 ”Memory Cache” Submenu The following pop-up menu appears when you select the submenu “Memorycache” in the main menu: PhoenixBIOS Setup Utility Item Specific Help System Time: ESC Exit System Date: Select Item Select Menu...

Page 98 - ”Boot Options” Submenu

Configuring the SIMATIC Box PC 620 5-10 SIMATIC Box PC 620 Manual A5E00131465-01 ”Boot Options” Submenu The following submenu appears when you select the option “Boot Options” in themain menu: PhoenixBIOS Setup Utility Item Specific Help QuickBoot Mode: ESC Exit Select Item Select Menu + / – Select ...

Page 99 - Example of a summary screen:; The Summary screen appears when the system run-up phase completes.

Configuring the SIMATIC Box PC 620 5-11 SIMATIC Box PC 620 Manual A5E00131465-01 Floppy check The floppy head is stepped inward and then back to its original position during the system run-up phase. This test is useful because it reinitializes the drive. Summary screen The most important system para...

Page 100 - “Keyboard Features” Submenu

Configuring the SIMATIC Box PC 620 5-12 SIMATIC Box PC 620 Manual A5E00131465-01 “Keyboard Features” Submenu The following submenu appears if you select the “Keyboard Features” field in themain menu: PhoenixBIOS Setup Utility Item Specific Help NumLock: ESC Exit Selects Power-On statefor NumLock on ...

Page 101 - ”Hardware Options” Submenu; Entry

Configuring the SIMATIC Box PC 620 5-13 SIMATIC Box PC 620 Manual A5E00131465-01 ”Hardware Options” Submenu The following submenu appears when you select the “Hardware Options” field inthe main menu: PhoenixBIOS Setup Utility Item Specific Help PCI – MPI / DP: ESC Exit Select Item Select Menu + / – ...

Page 103 - The Advanced Menu

Configuring the SIMATIC Box PC 620 5-15 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.2 The Advanced Menu Menu Structure PhoenixBIOS Setup Utility Item Specific Help ESC Exit Reset Configuration Data: Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit COM/...

Page 104 - Submenu COM/LPT Configuration

Configuring the SIMATIC Box PC 620 5-16 SIMATIC Box PC 620 Manual A5E00131465-01 Local Bus IDE adapter [Primary] Primary IDE interface for max. two drives is activated. [Secondary] Secondary IDE interface for max. two drives is activated. [Both] Both IDE interfaces for max. four drives are activated...

Page 105 - Printer Port Internal LPT1

Configuring the SIMATIC Box PC 620 5-17 SIMATIC Box PC 620 Manual A5E00131465-01 Printer Port Internal LPT1 Mode: Use this setting to set the operating mode of the printer interface. Refer to the table below to ensure that the setting matches the printer connected to the printer port. Settable Mode ...

Page 106 - ”PCI Devices” Submenu

Configuring the SIMATIC Box PC 620 5-18 SIMATIC Box PC 620 Manual A5E00131465-01 ”PCI Devices” Submenu If the PCI devices field is selected, the following submenu appears: PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup D...

Page 107 - Submenu “PCI/PNP ISA IRQ Resource Exclusion”

Configuring the SIMATIC Box PC 620 5-19 SIMATIC Box PC 620 Manual A5E00131465-01 Submenu “PCI/PNP ISA IRQ Resource Exclusion” Available means that the Plug and Play mechanism in BIOS can allocate the IRQto Plug and Play submodules or motherboard functions. Use the ’Reserved’ setting only if the inte...

Page 108 - “PCI IRQ line” Field

Configuring the SIMATIC Box PC 620 5-20 SIMATIC Box PC 620 Manual A5E00131465-01 “PCI IRQ line” Field PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit Enter Help F1 Advanced PCI Configuration Reserve...

Page 109 - Submenu “Video Adapter Settings”

Configuring the SIMATIC Box PC 620 5-21 SIMATIC Box PC 620 Manual A5E00131465-01 Submenu “Video Adapter Settings” PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit Enter Help F1 Advanced Video Adapter...

Page 110 - The Security Menu; Summary

Configuring the SIMATIC Box PC 620 5-22 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.3 The Security Menu Summary You can only edit the fields enclosed in square brackets. You can assign twopasswords to protect your PC from unauthorized use. With the supervisorpassword, the setup access can be restri...

Page 112 - The Power Menu; This menu has the following structure.

Configuring the SIMATIC Box PC 620 5-24 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.4 The Power Menu Summary This menu has the following structure. PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup Defaults Save and Exit P...

Page 113 - The Boot Sequence Menu; This menu allows you to prioritize the boot devices.; During booting the boot drive can be selected with the ESC key.

Configuring the SIMATIC Box PC 620 5-25 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.5 The Boot Sequence Menu Summary This menu allows you to prioritize the boot devices. PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup De...

Page 115 - The Version Menu

Configuring the SIMATIC Box PC 620 5-27 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.6 The Version Menu This menu contains the information you will have to quote when you send us technical questions about your system. PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / ...

Page 116 - The Exit Menu; The setup program is always terminated using this menu.

Configuring the SIMATIC Box PC 620 5-28 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.7 The Exit Menu The Exit Menu The setup program is always terminated using this menu. PhoenixBIOS Setup Utility Item Specific Help ESC Exit Select Item Select Menu + / – Select Change Values Sub-Menu F9 F10 Setup De...

Page 117 - Default Setup Settings; Documenting Your Device Configuration; filled in your entries.; Systemparameter

Configuring the SIMATIC Box PC 620 5-29 SIMATIC Box PC 620 Manual A5E00131465-01 5.1.8 Default Setup Settings Documenting Your Device Configuration If you have made any modifications to the default Setup settings, you can enterthem in the following table. You can then refer to these entries if you n...

Page 120 - Configuring the PC Card

Configuring the SIMATIC Box PC 620 5-32 SIMATIC Box PC 620 Manual A5E00131465-01 5.2 Configuring the PC Card You can obtain the software you require for using PC cards under MS DOS, suchas S Socket Services S Card Services S Client Drivers S Flash File System from the nearest Siemens sales office or...

Page 121 - Error Diagnosis

6-1 SIMATIC Box PC 620 Manual A5E00131465-01 Error Diagnosis Overview of Chapter In chapter you will find on page 6.1 Problems When Using Modules from Other Manufacturers 6-2 6.2 The Monitor Remains Dark 6-3 6.3 The Screen Display Does not Appear or Drifts 6-4 6.4 No Mouse Pointer Appears on the Scr...

Page 122 - Problems When Using Modules from Other Manufacturers; Error Display

Error Diagnosis 6-2 SIMATIC Box PC 620 Manual A5E00131465-01 6.1 Problems When Using Modules from Other Manufacturers Error Display The PC crashes during power up. Cause The following causes are possible: – Double assignment of I/O addresses– Double assignment of hardware interrupts and/or DMA chann...

Page 123 - The Monitor Remains Dark; Cause and Remedy; The monitor has been switched off.

Error Diagnosis 6-3 SIMATIC Box PC 620 Manual A5E00131465-01 6.2 The Monitor Remains Dark Cause and Remedy The following causes are possible: The monitor has been switched off. Switch on the monitor. The monitor is in “powersave” mode. Press any key on the keyboard. The brightness button has been se...

Page 124 - The Screen Display Does not Appear or Drifts; Adjust the relevant entries for the monitor in the; No Mouse Pointer Appears on the Screen; The mouse pointer may not appear for the following reasons:; The mouse driver is not loaded

Error Diagnosis 6-4 SIMATIC Box PC 620 Manual A5E00131465-01 6.3 The Screen Display Does not Appear or Drifts Cause and Remedy Either the incorrect line frequency and/or the incorrect resolution is set for thescreen or for the user program. Stop the user program. If the error still occurs after you ...

Page 125 - The Clock Time and/or the Date in Your PC Is Incorrect; Remedy; Set the clock time and the date in the setup menu.; USB-Device does not function; BIOS setup can be controlled by a USB keyboard.

Error Diagnosis 6-5 SIMATIC Box PC 620 Manual A5E00131465-01 6.5 The Clock Time and/or the Date in Your PC Is Incorrect Remedy Set the clock time and the date in the setup menu. Press <F2> to call setup when booting the computer. Note The battery is dead if the clock time and the date are stil...

Page 126 - An Error Message Appears on the Screen; Error Messages; Error Message on the Screen

Error Diagnosis 6-6 SIMATIC Box PC 620 Manual A5E00131465-01 6.7 An Error Message Appears on the Screen Error Messages The following table describes the error messages that the BIOS system outputs.Error messages the operating system or program outputs are described in themanuals for these programs. ...

Page 128 - Beeps; Special codes; x short

Error Diagnosis 6-8 SIMATIC Box PC 620 Manual A5E00131465-01 6.8 Diagnostic Messages (Port 80) When the SIMATIC PC is powered up, it runs a self-test (POST = Power OnSelf-Test). If the POST detects a fault, it outputs the sequence of beeps (beepcode) assigned for the fault. Each beep code consists o...

Page 129 - The POST codes in order of occurrence:; Display

Error Diagnosis 6-9 SIMATIC Box PC 620 Manual A5E00131465-01 The POST codes in order of occurrence: Display (hex) Meaning Description 02 TP_VERIFY_REAL Test whether the CPU is in real mode 1C TP_RESET_PIC Reset the interrupt controller 12 TP_RESTORE_CRO Restore the controller register 13 TP_PCI_BM_R...

Page 133 - Hardware Information

7-1 SIMATIC Box PC 620 Manual A5E00131465-01 Hardware Information Overview of Chapter In chapter you will find on page 7.1 Current Requirement of the Components (Maximum Values) 7-2 7.2 Overview of the Components and Ports 7-3 7.3 System Resources 7-4 7.4 Monitoring Functions 7-5 7.5 Ports 7-9 7.6 B...

Page 134 - Current Requirement of the Components (Maximum Values); Basic System with Power Supply Unit 85W

Hardware Information 7-2 SIMATIC Box PC 620 Manual A5E00131465-01 7.1 Current Requirement of the Components (Maximum Values) Basic System with Power Supply Unit 85W Component Voltage +5V +3.3V +12V –5V –12V Pentium III Motherboard 0.5 A 2.5 A 0.1 A 0.02 A Processor Pentium III 1260 5 A Floppy disk d...

Page 135 - Overview of the Components and Ports; Description

Hardware Information 7-3 SIMATIC Box PC 620 Manual A5E00131465-01 7.2 Overview of the Components and Ports Component/Port Description Parameters Chipset VIA PN133T SDRAM BIOS Update via software 512K in 4 pages CPU Pentium III / Celeron (type FC-PGA370) Upgradeable Multimedia support On Board L2-Cac...

Page 136 - Parameters; System Resources

Hardware Information 7-4 SIMATIC Box PC 620 Manual A5E00131465-01 Component/Port Parameters Description Parallel Standard, bidirectional, EPP and ECP mode 25 pin subminiature Cannon connector DP12 * 2 Communication port SIMATIC S7 potentially isolated DP12 * 1 (CP 5611 compatible) 12MBaud USB Univer...

Page 137 - Monitoring functions; Overview; The following individual functions are implemented:; Signals on the Front Interface; The meaning of the indicators is as follows:; LED

Hardware Information 7-5 SIMATIC Box PC 620 Manual A5E00131465-01 7.4 Monitoring functions The LEDs described in the following passages exist only for specific device models. The basic model of the Box PC 620 has no LEDs. The hardware signalsare described in Section 7.5.2. 7.4.1 Overview Function Th...

Page 138 - Temperature Monitoring/Indication; Reaction

Hardware Information 7-6 SIMATIC Box PC 620 Manual A5E00131465-01 7.4.3 Temperature Monitoring/Indication Temperature Monitoring The temperature is measured by means of three temperature sensors. One sensormonitors the processor temperature, the second the temperature in the area of thememory module...

Page 139 - Function; WD Monitoring Times TWD

Hardware Information 7-7 SIMATIC Box PC 620 Manual A5E00131465-01 7.4.4 Watchdog (WD) Function The watchdog monitors the execution of a program. The purpose of the WD is tonotify the user of a program crash through various reactions. The watchdog is idle when the PC is switched on or after a HW-RESE...

Page 140 - Fan Monitoring; Acknowledgement of the error message via the SOM program.

Hardware Information 7-8 SIMATIC Box PC 620 Manual A5E00131465-01 7.4.5 Fan Monitoring Processor fan operation is monitored. If the fan should fail, the following reactionsare triggered: Reaction Option SOM application is displayed always The temperature error remains stored until the cause of the f...

Page 141 - External ports for the connection of external devices; External Ports; Port

Hardware Information 7-9 SIMATIC Box PC 620 Manual A5E00131465-01 7.5 Ports The following ports are available on the motherboard of the Box PC 620: External ports for the connection of external devices Interfaces for the connection of display devices Ports for internal connections (drives, bus board...

Page 142 - The serial port (COM 1) on the Box PC has the following pinout:; Designation; The line current (TTY) interface is an optional product feature.

Hardware Information 7-10 SIMATIC Box PC 620 Manual A5E00131465-01 Serial Port COM1 (PLC/V.24/Modem) * The serial port (COM 1) on the Box PC has the following pinout: 1 13 14 25 Figure 7-1 COM 1 Serial Port (Socket Connector) Pin No. Designation Description Input /Output 1 - Shield - 2 TxD (D1) Seri...

Page 143 - Gender Changer for COM1; The serial port (COM 2) on the Box PC has the following pinout:

Hardware Information 7-11 SIMATIC Box PC 620 Manual A5E00131465-01 Gender Changer for COM1 You can convert the COM1/V24 / AG port of the SIMATIC PC family into the usual25 pin male connector by means of the enclosed gender changer (25 pin / 25 pin).For this, you only have to plug the gender changer ...

Page 144 - Parallel Port LPT1; The parallel port (LPT 1) on the Box PC has the following pinout:

Hardware Information 7-12 SIMATIC Box PC 620 Manual A5E00131465-01 Parallel Port LPT1 The parallel port (LPT 1) on the Box PC has the following pinout: 1 13 14 25 Figure 7-3 Parallel Port LPT 1 (Socket) Pin No. Designation Description Input / Output 1 / Strobe (CLK) Data message Output (open collect...

Page 146 - USB Port; The Universal Serial Bus ports have the following pinout:; The connector is of type A.

Hardware Information 7-14 SIMATIC Box PC 620 Manual A5E00131465-01 USB Port The Universal Serial Bus ports have the following pinout: 4 32 1 Figure 7-6 USB port Pin-No. Designation Description Input / Output 1 VCC +5V (fused) Output 2 - Data Data line Input / Output 3 + Data Data line Input / Output...

Page 148 - Ethernet RJ45 Connection; * is not necessary for data transfer

Hardware Information 7-16 SIMATIC Box PC 620 Manual A5E00131465-01 Ethernet RJ45 Connection LED green LED yellow 1 8 Figure 7-8 Ethernet port Pin-No. Designation Description Input / Output 1 TD+ Transmitted data Output 2 TD– Transmitted data Output 3 RD+ Received data Input 4, 5 * SYMR Internal 75 Ω...

Page 149 - VGA Socket Connector; The VGA socket connector on the Box PC has the following pinout:

Hardware Information 7-17 SIMATIC Box PC 620 Manual A5E00131465-01 VGA Socket Connector The VGA socket connector on the Box PC has the following pinout: 1 5 6 10 11 15 Figure 7-9 VGA Socket Connector Pin No. Designation Description Input/Output 1 R Red Output 2 G Green Output 3 B Blue Output 4 - Una...

Page 150 - Assignment of the Front Ports on the Motherboard

Hardware Information 7-18 SIMATIC Box PC 620 Manual A5E00131465-01 7.5.2 Assignment of the Front Ports on the Motherboard Port Position Connector Description Display (CMOS) Internal X420 Connection of LC displays with CMOS port Display (LVDS) Internal X400 Connection of LC displays with single chip ...

Page 153 - Allocation of the Display to Display Select Pins

Hardware Information 7-21 SIMATIC Box PC 620 Manual A5E00131465-01 Allocation of the Display to Display Select Pins The automatic configuration of one of 15 possible displays is effected via theDisplay Select Inputs. The Display Select inputs are fitted with Pull-Up resistors,i.e. if these inputs ar...

Page 154 - I/O Port for Front Control Elements

Hardware Information 7-22 SIMATIC Box PC 620 Manual A5E00131465-01 I/O Port for Front Control Elements All the signals in addition to the Display and COM2 port which are necessary forthe connection of front control elements are applied to this port. The maximumcable length is 50cm with a USB data tr...

Page 155 - Assignment of the Internal Ports on the Motherboard

Hardware Information 7-23 SIMATIC Box PC 620 Manual A5E00131465-01 Internal Serial Port COM2 (V.24) This port is connected in parallel to the external COM2 port. Both ports cantherefore only be used alternatively. The assignment is executed in such a waythat a 1:1 connection to a 9 pin subminiature ...

Page 156 - Port to the Bus Unit

Hardware Information 7-24 SIMATIC Box PC 620 Manual A5E00131465-01 2.5” hard disks internal X4 170h-177h, 1F0h-1F7h, can be disabled IRQ14, IRQ15, edge-triggered 44 pin, 2mm male connector (2.5” HD, pri- mary), a maximum of two drives are operable CD ROM internal X3 170h-177h, 1F0h-1F7h, can be disa...

Page 157 - DC Port of the Power Supply Unit 85W

Hardware Information 7-25 SIMATIC Box PC 620 Manual A5E00131465-01 DC Port of the Power Supply Unit 85W The power supply unit has a connector (X2) through which all the signals on theDC side are connected with the motherboard. Pin No. Row A Description Pin No. Row B Description 1 PS_PWROK Power Good...

Page 158 - DC Port of the Power Supply Unit 105W

Hardware Information 7-26 SIMATIC Box PC 620 Manual A5E00131465-01 DC Port of the Power Supply Unit 105W The power supply unit has a connector (X2) through which all the signals on theDC side are connected with the motherboard. Pin no. Designation Description 1 P5V +5V 2 P5V +5V 3 P5V +5V 4 P5V +5V ...

Page 159 - Port to the Floppy Disk Drive; Assignment of the IDE Ports

Hardware Information 7-27 SIMATIC Box PC 620 Manual A5E00131465-01 Port to the Floppy Disk Drive This port is intended for the connection of a notebook floppy disk drive. Themaximum connection length of the data cable may not exceed 40cm. Pin no. Designation Description Input/Output 1 P5V +5V Output...

Page 160 - Pin

Hardware Information 7-28 SIMATIC Box PC 620 Manual A5E00131465-01 Pin X41 Meaning Pin X4/X3 Meaning 1 RESET Reset 1 RESET Reset 2 GND 2 GND 3 D7 Data signal D7 3 D7 Data signal D7 4 D8 Data signal D8 4 D8 Data signal D8 5 D6 Data signal D6 5 D6 Data signal D6 6 D9 Data signal D9 6 D9 Data signal D9...

Page 161 - Connection for LS240 Drive; Meaning

Hardware Information 7-29 SIMATIC Box PC 620 Manual A5E00131465-01 Connection for LS240 Drive The optional LS240 drive is connected via this port. This port is connected inparallel with the secondary IDE port. The connected LS240 drive is automaticallymaster (i.e. bootable drive) as the result of a ...

Page 162 - PS Connection for Hard Disk; The CPU fan is connected via this connection.; Connection for Device Fan; The device fan is connected via this connection.; Connection for Backup Battery

Hardware Information 7-30 SIMATIC Box PC 620 Manual A5E00131465-01 PS Connection for Hard Disk The power supply of the 3.5” hard disk is effected via this connection. Pin No. Designation Description Input / Output 1 P12V +12 V Output 2 GND Ground – 3 GND Ground – 4 P5V + 5V Output Connection for CPU...

Page 163 - Bus Board; It is mounted by means of two screws.

Hardware Information 7-31 SIMATIC Box PC 620 Manual A5E00131465-01 7.6 Bus Board 7.6.1 Design and Mode of Operation The bus board is designed as a passive link between the motherboard and theexpansion modules . It is mounted by means of two screws. The bus board has two ISA slots and two PCI slots, ...

Page 164 - ISA Slot Pin Assignment

Hardware Information 7-32 SIMATIC Box PC 620 Manual A5E00131465-01 7.6.2 ISA Slot Pin Assignment Pin Designation Type* Pin Designation Type A1 –IOCHCK I B1 0 V GND A2 SD 07 I/O B2 RESET DRV O A3 SD 06 I/O B3 + 5V V CC A4 SD 05 I/O B4 IRQ 9 I A5 SD 04 I/O B5 – 5V V CC A6 SD 03 I/O B6 reserved I A7 SD...

Page 166 - PCI Slot Pin Assignment

Hardware Information 7-34 SIMATIC Box PC 620 Manual A5E00131465-01 7.6.3 PCI Slot Pin Assignment 5V System Environment Side B Side A 1 -12V TRST# 2 TCK +12V 3 Ground TMS 4 TDO TDI 5 +5V +5V 6 +5V INTA# 7 INTB# INTC# 8 INTD# +5V 9 PRSNT1# Reserved 10 Reserved +5V (I/O ) 11 PRSNT2# Reserved 12 Ground ...

Page 167 - Assignment of the Slot Specific PCI Bus Signals; PCI Socket

Hardware Information 7-35 SIMATIC Box PC 620 Manual A5E00131465-01 Assignment of the Slot Specific PCI Bus Signals PCI Socket Pin No. PCI Slot 1 shared ISA PCI Slot B16 clk (slot 1) clk (slot2) A6 inta# intb# A7 intc# intd# B7 intb# intc# B8 intd# inta# B18 req1 req0 A17 gnt1 gnt0 A26 ad29 ad30

Page 168 - Power Supply with 85W power output (AC and DC); Technical Specifications; Voltage

Hardware Information 7-36 SIMATIC Box PC 620 Manual A5E00131465-01 7.7 Power Supply with 85W power output (AC and DC) Technical Specifications Voltage Max. Current Voltage Stability + 12 V 1.7 A " 4 % – 12 V 0.2 A " 6 % + 5 V 10 A " 3 % + 3.3 V 4.2 A " 5 % Power-Good-Signal T1 T2 T3 ...

Page 169 - Power Supply with 105W power output (AC and DC)

Hardware Information 7-37 SIMATIC Box PC 620 Manual A5E00131465-01 7.8 Power Supply with 105W power output (AC and DC) Technical Specifications Voltage Max. Current Voltage Stability + 12 V 2.5 A " 4 % – 12 V 0.3 A " 5 % + 5 V 13.5 A " 3 % + 3.3 V 8.5 A " 3 % Power-Good-Signal T1 T2 ...

Page 170 - Connecting Cables; SIMATIC S5 Connecting Cable; SIMATIC S7 Connecting Cable for MPI/DP

Hardware Information 7-38 SIMATIC Box PC 620 Manual A5E00131465-01 7.9 Connecting Cables SIMATIC S5 Connecting Cable You can use the SIMATIC S5 connecting cable (not supplied with all variants) toconnect your PC to a SIMATIC S5 programmable controller. Please read the notesin Chapter 3. PU 7xx side2...

Page 171 - Reinstallation of the Software; Section

8-1 SIMATIC Box PC 620 Manual A5E00131465-01 Reinstallation of the Software What Does This Chapter Contain? This chapter describes how to reinstall software in case the preinstalled softwareshould be faulty. Chapter Overview Section Description Page 8.1 Restoring the Hard Disk 8-2 8.2 Installation o...

Page 172 - on the hard disk. All drives on the hard disk will be erased.; Primary Partition; select the boot options is displayed.

Reinstallation of the Software 8-2 SIMATIC Box PC 620 Manual A5E00131465-01 8.1 Restoring the Hard Disk 8.1.1 Creating Partitions under Microsoft Windows 98 After installing a new hard disk it is necessary to create partitions with the program“FDisk” when the partitions have errors or need to be cha...

Page 173 - Creating an Extended Partition; Creating Partitions under Windows NT

Reinstallation of the Software 8-3 SIMATIC Box PC 620 Manual A5E00131465-01 Creating an Extended Partition In order to create an extended partition, you have to first boot from theWindows Me Recovery CD as described in steps 1 to 4 above. Using ”A:\>FDisk” start the Microsoft Windows Me hard disk...

Page 174 - Creating Partitions under Windows 2000

Reinstallation of the Software 8-4 SIMATIC Box PC 620 Manual A5E00131465-01 To restore the partitions to their original condition, please do the following: Primary Partition 1. To boot from the Recovery CD proceed as follows: When the message Press <F2> to enter Setup appears on the screen pre...

Page 175 - Primary Partition, FAT32 File System; Boot from the Recovery CD and press ESC when the BIOS message; Creating an Extended FAT 32 Partition; Create an extended DOS partition for the rest of the disk space.

Reinstallation of the Software 8-5 SIMATIC Box PC 620 Manual A5E00131465-01 Primary Partition, FAT32 File System 1. Boot from the Recovery CD and press ESC when the BIOS message Press <F2> to enter Setup appears. After initialization, select the boot options in the boot menu. 2. Select ”ATAPI ...

Page 176 - Installing the Windows Operating System

Reinstallation of the Software 8-6 SIMATIC Box PC 620 Manual A5E00131465-01 8.2 Installing the Windows Operating System Dependent on the device model, different operating system CDs are shipped:a Recovery Microsoft Windows 98, a Recovery Microsoft Windows NT, a Recovery Microsoft Windows 2000. 8.2.1...

Page 177 - Installing the Recovery CD for Microsoft Windows NT; Windows NT Installation Sequence

Reinstallation of the Software 8-7 SIMATIC Box PC 620 Manual A5E00131465-01 8. After data transfer and end message acknowledgement Windows 98 setup can be started directly using the LW:\WIN98\SETUP.EXE program. (LW: Drive to which the WIN98 folder has been transferred). 9. After having started setup...

Page 178 - C: after the selected recovery data have been copied.; multiuser environment.; Installing the Recovery CD for Microsoft Windows 2000

Reinstallation of the Software 8-8 SIMATIC Box PC 620 Manual A5E00131465-01 Notice By default, drive C: is used for the data transfer (Recovery).Ensure that there is an available disk space of approximately 250 MB left on drive C: after the selected recovery data have been copied. 8. Confirm the end...

Page 179 - Windows 2000 Installation Sequence

Reinstallation of the Software 8-9 SIMATIC Box PC 620 Manual A5E00131465-01 Windows 2000 Installation Sequence If a Windows operating system is already installed or if the PC has been startedwith a user created bootdisk, data transfer takes place using the OEMSETUP.EXEprogram. To do this, start the ...

Page 180 - Setting the Language Selection for Windows 2000

Reinstallation of the Software 8-10 SIMATIC Box PC 620 Manual A5E00131465-01 Setting the Language Selection for Windows 2000 The M ultilanguage U ser I nterface (MUI) allows you to set the Windows 2000 menus and dialogs to another language.In order to install the MUI, run the program MUISETUP.EXE in...

Page 181 - Installing Drivers and Software; Place the CD in the CD ROM drive.; Installing and Operating the Burner Software

Reinstallation of the Software 8-11 SIMATIC Box PC 620 Manual A5E00131465-01 8.3 Installing Drivers and Software To install the drivers and software from the “Documentation and Drivers” CDsupplied, proceed as follows: Place the CD in the CD ROM drive. Start the Start programm on the CD.The Acrobat R...

Page 183 - Guidelines for handling electrostatic; Overview of chapter

A-1 SIMATIC Box PC 620 Manual A5E00131465-01 Guidelines for handling electrostatic sensitive devices (ESD) Overview of chapter In chapter you will find on page A.1 What does ESD mean? A-2 A.2 Electrostatic charging A-3 A.3 Basic protective measures against discharge of static electricity A-4 A

Page 184 - Definition; The short term; ESD; has been adopted for these; after a lengthy operating period.

Guidelines for handling electrostatic A-2 SIMATIC Box PC 620 Manual A5E00131465-01 A.1 What does ESD mean? Definition All electronic components are equipped with high–integrated modules orcomponents. Conditioned by their technology, these electronic components areextremely sensitive to overvoltages ...

Page 185 - Charging

Guidelines for handling electrostatic A-3 SIMATIC Box PC 620 Manual A5E00131465-01 A.2 Electrostatic charging Charging Anyone who is not conductively connected to the electrical potential of theirsurroundings can be electrostatically charged. The maximum electrostatic voltage values which an operato...

Page 186 - Ensuring a good ground connection

Guidelines for handling electrostatic A-4 SIMATIC Box PC 620 Manual A5E00131465-01 A.3 Basic protective measures against discharge of staticelectricity Ensuring a good ground connection When handling electrostatic sensitive devices, ensure that your person, theworkplace and packaging are grounded. I...

Page 188 - Technical Specifications of the SIMATIC Box PC 620; General

Technical Specifications B-2 SIMATIC Box PC 620 Manual A5E00131465-01 B.1 Technical Specifications of the SIMATIC Box PC 620 General Order nos. See order documentation Dimensions (w x h x d) 295x265x80 mm, without CD-ROM drive 295x265x100 mm, with CD-ROM drive Weight approx. 6kg (13.5 lbs.) Supply v...

Page 189 - Ambient Conditions

Technical Specifications B-3 SIMATIC Box PC 620 Manual A5E00131465-01 Ambient Conditions Temperature – operation– storage/transport– gradient tested to DIN EN 60068-2-2:1994, DIN IEC 60068-2-1,DIN IEC 60068-2-14,+ 5 ° C to +45 ° C - 20 ° C to +60 ° C (Max. speed of temperature change 10 o C/h (50 o ...

Page 190 - Graphics

Technical Specifications B-4 SIMATIC Box PC 620 Manual A5E00131465-01 Graphics Graphic controller UXGA LCD controller on the AGP bus Graphic store bis zu 32 MB SDRAM sind Bestandteil des Hauptspei- chers und können konfiguriert werden (8/16/32MB) Resolutions/frequencies/colors CRT: up to 1600x1200/8...

Page 191 - What Does this Chapter Contain?; devices and a brief explanation of each of the terms.

Glossary-1 SIMATIC Box PC 620 Manual A5E00131465-01 Glossary What Does this Chapter Contain? This chapter contains a glossary in which you will find a list of the terminology used in conjunction with the SIMATIC range of personal computers and programming devices and a brief explanation of each of t...

Page 192 - Access Protection; ACPI; APM; AuthorsW

Glossary Glossary-2 SIMATIC Box PC 620 Manual A5E00131465-01 A AC A lternating C urrent. Current that changes its direction at regular intervals. Access Protection Access to the programs and data of a programming device can be protected bypasswords. The user password or Superuser password can be ass...

Page 193 - Base Memory; Acronym for

Glossary Glossary-3 SIMATIC Box PC 620 Manual A5E00131465-01 B Backup Duplicate of a program, storage medium or database. Created to backup or to protect irreplaceable data of working copies as a precaution against corruption or destruction. Some applications automatically create backup copies, whil...

Page 194 - Cardbus interface

Glossary Glossary-4 SIMATIC Box PC 620 Manual A5E00131465-01 C Cache The cache memory buffers often used data to increase the speed of access. The computer has two cache levels. Cardbus interface This interface is compatible with 32-bit Cardbus Cards with PCI performancecompliant with the PC Card st...

Page 195 - Device Configuration

Glossary Glossary-5 SIMATIC Box PC 620 Manual A5E00131465-01 Controller Integrated hardware and software controllers that control the functions of certain internal or peripheral devices (for example, the keyboard controller). Cursor Collective term for mouse pointer and text cursor. Cursor Control K...

Page 197 - EIDE; nhanced; Energy Options; specially designed slots in the programmable logic controller.; Ethernet; Extended Memory; File

Glossary Glossary-7 SIMATIC Box PC 620 Manual A5E00131465-01 E EIDE E nhanced I ntegrated D rive E lectronics. An extension of the IDE standard, EIDE is a hardware interface standard for disk drive designs that house control circuits inthe drives themselves. It allows for standardized interfaces to ...

Page 198 - Dormancy

Glossary Glossary-8 SIMATIC Box PC 620 Manual A5E00131465-01 Function Keys Function keys can be divided into two different types; the normal function keyswhich are assigned a particular function of the computer (for example, delete key),and programmable function keys (softkeys). G Gender Changer The...

Page 199 - ntegrated

Glossary Glossary-9 SIMATIC Box PC 620 Manual A5E00131465-01 Hub In a network, a device joining communication lines at a central location, providing acommon connection to all devices on the network. The term is an analogy to thehub of a wheel. Hyperlink A connection between an element in a hypertext...

Page 202 - Mo; dulator and; dem; odulator of a signal transmission facility. It

Glossary Glossary-12 SIMATIC Box PC 620 Manual A5E00131465-01 Modem Communications device that enables a computer to send and receive data over atelephone line. Mo dulator and dem odulator of a signal transmission facility. It converts the digital pulses from a computer into analog signals (and vice...

Page 203 - Network; Personal computer

Glossary Glossary-13 SIMATIC Box PC 620 Manual A5E00131465-01 N Network Link between programming devices and programmable controllers by means ofinterface modules, physical cables, and the corresponding software to allow dataexchange between the devices. O Operating System Collective term for all fu...

Page 204 - (PCMCIA). Designation for auxiliary cards that conform with PCMCIA; Pix El; SIMATIC S5 programmable logic controller

Glossary Glossary-14 SIMATIC Box PC 620 Manual A5E00131465-01 PC Card Trademark of the Personal Computer Memory Card International Association (PCMCIA). Designation for auxiliary cards that conform with PCMCIA specifications. The PC Card that has roughly the size of a credit card can be plugged into...

Page 205 - Plug and Play; supports Plug and Play and a corresponding expansion card.; Power Button; The device can be switched on or off with the power button.; Power Management; Programmable Logic Controller System

Glossary Glossary-15 SIMATIC Box PC 620 Manual A5E00131465-01 Plug and Play Generally, a reference to the ability of a computer to automatically configure the system for communication with peripheral devices (for example monitors, modems or printers). The user can plug in a peripheral and ”play” it ...

Page 207 - SETUP; SIMATIC S5 Memory Submodules; Software; afecard; Standby

Glossary Glossary-17 SIMATIC Box PC 620 Manual A5E00131465-01 SETUP A program in which information about the device configuration (that is, theconfiguration of the hardware on the programming device) is defined. The deviceconfiguration of the programming device is preset with defaults. Changes mustt...

Page 208 - Super Twist Nematic passive display

Glossary Glossary-18 SIMATIC Box PC 620 Manual A5E00131465-01 STEP 7 Programming software for the creation of user programs for SIMATIC S7 control. STN Display Super Twist Nematic passive display Suspend to Disk Transition to power-off status, with prior saving of the system contents to the harddisk...

Page 210 - Video Adapter; WWW; orld; Working Memory

Glossary Glossary-20 SIMATIC Box PC 620 Manual A5E00131465-01 Video Adapter Also known as Video Controller, this electronic component generates the videosignal sent through a cable to a video display. The video adapter is usually locatedon the computer’s main system board or on an expansion board, b...

Page 211 - Write Protection; Write protection for files or diskettes

Glossary Glossary-21 SIMATIC Box PC 620 Manual A5E00131465-01 Write Protection Write protection for files or diskettes Write protection for files; this type of write protection is stored in the computer and is allocated by the system manager. Floppy disk write protection; for 3 1/2 in. diskettes by ...

Page 213 - Index

Index-1 SIMATIC Box PC 620 Manual A5E00131465-01 Index A AC Power Supply, 1-2, 2-2, 3-3 Acclimatization time, 1-1 Additional Software, 2-12 Ambient conditions, 1-1 Approvals, iii AT Cards, 4-12 B Backup Battery, 2-12, 4-10 Safety instructions, 1-4, 2-12 BIOS Setup, 5-2 Error messages, 6-6 Menus, 5-2...

Page 214 - Installing

Index Index-2 SIMATIC Box PC 620 Manual A5E00131465-01 G Gender Changer, 7-11 H Hard Disk Drive, 2-11 removal and installation, 4-17 Hardware Information, 7-1 I Installing Burner Software, 8-11 Drivers, 8-11 Software, 8-11 the PC, 1-1, 3-3 the Recovery CD for Microsoft Windows 2000, 8-8 the Recovery...

Page 215 - Removal and installation

Index Index-3 SIMATIC Box PC 620 Manual A5E00131465-01 R Removal and installation bus board, 4-23 CD ROM drive, 4-19 device for holding down the modules, 4-14 expansion cards, 4-16 fan, 4-25 floppy disk drive, 4-20 LS 240 drive, 4-21 motherboard, 4-24 power supply unit, 4-22 Repairs, safety instruct...