Page 2 - Software License and Limited Warranty
Software License and Limited Warranty © Copyright 2004, Siemens Subscriber Networks, Inc. All rights reserved. Printed in the U.S.A. Siemens Subscriber Networks, Efficient Networks, the Efficient Networks logo, and SpeedStream(tm) are trademarks of Siemens AG. All other names may be trademarks, serv...
Page 4 - SIEMENS; Table of Contents; Chapter 1 Product Specifications
SIEMENS se5880 Ethernet Security RouterUser’s Guide SIEMENS i Table of Contents Chapter 1 Product Specifications Front Panel................................................................................................................................................... 1Back Panel ...................
Page 5 - Chapter 4 User Setup
SIEMENS se5880 Ethernet Security RouterUser’s Guide SIEMENS ii Table of Contents Dynamic Host Configuration Protocol ........................................................................................... 18 Chapter 4 User Setup User Management.......................................................
Page 6 - Chapter 7 Monitoring Router
SIEMENS se5880 Ethernet Security RouterUser’s Guide SIEMENS iii View Dropped Packets .................................................................................................................. 59Configure Firewall Rules ............................................................................
Page 7 - Chapter 1; Product Specifications; Front Panel; Light
SIEMENS 1 Chapter 1 Product Specifications Front Panel The following table explains the LEDs that appear on the Front Panel of the Siemens se5880 router. Back Panel The following table descrcibes the various connections on the back panel of the Siemens se5880 router. Light Color Indications Power Gr...
Page 8 - Hardware Specifications; Consumption:10W maximum
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 1 Product Specifications Hardware Specifications SIEMENS 2 Hardware Specifications Physical Specifications • Unit Dimensions:– 8.4W x 7D x 1.7H inches – 21.3W x 17.8D x 4.3H cm • Weight:– 1.5 lbs.– .68 Kg. Operational Environment • Temperat...
Page 9 - Software Specifications; Bridging
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 1 Product Specifications Software Specifications SIEMENS 3 Software Specifications Bridging • Transparent bridging including Spanning Tree protocol (IEEE 802.1D) • Bridge filters Configuration Management • Easy Setup Web Management Interfac...
Page 10 - Security
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 1 Product Specifications Software Specifications SIEMENS 4 Security • Role-based management • User authentication (PAP/CHAP) with PPP (RFC 1334, RFC 1994) • Password control for Configuration Manager • SNMP password and community name reass...
Page 11 - Chapter 2; Installation; Installation Requirements; Package Contents
SIEMENS 5 Chapter 2 Installation This chapter describes the steps you must take to install and configure the various components in your network to utilize the Siemens Ethernet Security Router. This includes setting up the hardware connections to the Internet router, configuring the PC to use the Int...
Page 12 - Hardware Installation; TRUSTED; PC Configuration
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation Hardware Installation SIEMENS 6 Hardware Installation You may position the Siemens broadband router at any convenient location where it will be well ventilated. Do not stack it with other devices or place it on the carpet. Yo...
Page 13 - Configuration; tab on the Network window.; Properties; option is selected. This is the default Windows; OK; to close each dialog.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 7 PC Configuration Your PC must be configured to use the TCP/IP protocol suite over the Internet, and to accept Dynamic Host Configuration Protocol address assignments from the router. Although this i...
Page 14 - Windows NT 4; from the
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 8 Windows NT 4 1. On your desktop, right click on the Network Neighborhood icon. This displays the Network window. 2. Click the Protocols tab. 3. Select TCP/IP Protocol from the Network Protocols list...
Page 16 - Windows XP; Local Area Connection; Configure the router
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 10 Windows XP 1. Click Start >Control Pane l. This displays the Control Panel window. 2. Double-click the Network Connections icon. This displays the Network Connection window. 3. Right-click Local...
Page 17 - Ethernet; Connect via; Configure
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 11 Mac OS 9.x 1. Click Apple -> Control Panels -> TCP/IP . This displays the TCP/IP Control Panel window. 2. Select Ethernet from the Connect via drop-down menu. 3. Select Using DHCP Server from...
Page 18 - Mac OSX
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 12 Mac OSX 1. Click Apple -> System Preferences . This displays the System Preferences window. 2. Double-click the Network icon under the Internet & Network section. This displays the Network w...
Page 19 - Linux; To update the system status, ensure that the
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation PC Configuration SIEMENS 13 Linux 1. From a terminal window, run linuxconfig . This displays the Config window. 2. Click the Adaptor tab. 3. Enter any information specified by your service provider in the fields under the app...
Page 20 - Configuring the Router; Establish Connection; Address
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation Configuring the Router SIEMENS 14 Configuring the Router The Siemens Business Class Router family of products provides two user interfaces: a Web Management Interface and a console-based Command Line Interface (CLI). The Web ...
Page 21 - Router Information Page; Router Information
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 2 Installation Configuring the Router SIEMENS 15 Router Information Page The Router Information Page is the first page you encounter after logging into the router. The Router Information page displays basic router information and configurat...
Page 22 - Chapter 3; Access Easy Setup Wizard; Easy Setup; Untrusted Interface Configuration; Easy Setup; Using PPPoE; Not Using PPPoE
SIEMENS 16 Chapter 3 Easy Setup This chapter describes how to define router configuration settings using the Easy Setup Wizard. These settings control access to the Wide Area Network (WAN) and Local Area Network (LAN). During the Easy Setup procedure, you will be prompted to specify configuration pa...
Page 23 - Dynamic Host Configuration Protocol
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 3 Easy Setup Untrusted Interface Configuration SIEMENS 17 Using PPPoE If you selected Using PPPoE from the Untrusted Interface Configuration page , perform the following steps t o configure Point-to-Point Protocol over Ethernet: 1. Enter PP...
Page 24 - Optionally select
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 3 Easy Setup Untrusted Interface Configuration SIEMENS 18 Dynamic Host Configuration Protocol Dynamic Host Configuration Protocol (DHCP) provides a dynamic, “upon request,” IP address to computers and other networked devices. The router can...
Page 25 - Trusted Interface Configuration; To configure the Trusted Interface:; IP Address; traffic should be forwarded to the WAN.; Save and Reboot; . The router will reboot with the new configuration settings.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 3 Easy Setup Untrusted Interface Configuration SIEMENS 19 Trusted Interface Configuration Trusted Interface information is configured on the Trusted Interface Configuration page. To configure the Trusted Interface: 1. In IP Address , enter ...
Page 26 - Chapter 4; User Setup; User Management
SIEMENS 20 Chapter 4 User Setup This chapter describes how to set up users on the router and control their access to router functions and to the Internet. The features that control users and their access are listed below. To access one of these options, click the link on the left navigation pane of ...
Page 27 - Adding/Modifying A User Account; Management Classes
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 21 Adding/Modifying A User Account User accounts are used to control access to the router and the Internet. To add a user account: 1. Click New User on the User Management page. This displays the Add/Mod...
Page 28 - Deleting A User Account; To delete a user account:; Select User; list on the User Management page,; Delete User; to confirm the account deletion.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 22 Deleting A User Account To delete a user account: 1. Select the name of the account you want to delete in the Select User list on the User Management page, then click Delete User . 2. When prompted, c...
Page 29 - User Lookup
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 23 User Lookup You can specify a primary and secondary database to use to identify users when logging into the router. To configure the primary and secondary databases: 1. Click User Lookup Config on the...
Page 30 - Secure Mode Configuration
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 24 Secure Mode Configuration You can enable secure mode to control whether an interface is trusted or untrusted. To configure Secure Mode: 1. Click Secure Mode Configuration on the left navigation pane o...
Page 31 - Configure the Radius Server
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 25 Configure the Radius Server Remote Authentication Dial In User Service (RADIUS) is client-server based access control and authentication feature. The RADIUS client resides locally on the router and wo...
Page 32 - Configure the TacPlus Server
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 26 Configure the TacPlus Server Tacplus allows access control and user authentication to be managed from a remote server.To configure the Tacplus Server: 1. Click Configure Tacplus Server on the left nav...
Page 33 - Class
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup User Management SIEMENS 27 Management Classes All system operations, are partitioned into functional groups called management classes. Management classes group functions into the following categories. Class Functional Areas Voi...
Page 34 - Change Password
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup Change Password SIEMENS 28 Change Password User passwords are changed from the Change Password page. To change a user password: 1. Click Change Password from the left navigation pane on the Router Information page. This display...
Page 35 - Access Control; To set Access Control parameters:
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 4 User Setup Access Control SIEMENS 29 Access Control Restrict administrative control of the router to a specific set of IP addresses on the Access Control page. Each remote access method (Telnet, Web, and SNMP) can be configured separately...
Page 36 - Chapter 5; Advanced Setup; Set the date and time on your router.
SIEMENS 30 Chapter 5 Advanced Setup This chapter describes how to configure advanced features on the router. Advanced features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page. DMZ Configure unrestricted two-way communica...
Page 37 - DMZ; or
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup DMZ SIEMENS 31 DMZ One computer on your local network can be configured to allow unrestricted two-way communication with servers or individual users on the Internet. This provides the ability to run programs that are incomp...
Page 39 - Router Clock
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Router Clock SIEMENS 33 Router Clock Use the Router Clock option to set the date and time on the router. To set the current date and time on the router: 1. Click Router Clock on the left navigation pane of the Router Inform...
Page 40 - DHCP
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup DHCP SIEMENS 34 DHCP DHCP (Dynamic Host Configuration Protocol), is a TCP/IP service protocol that provides dynamic leasing of IP addresses and other configuration information to client hosts on the network. The router can ...
Page 41 - QoS; Select one of the following from
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 35 QoS Quality of Service (QoS) actively manages network resources to sustain service levels for priority applications. To configure QoS: 1. Click QoS in the left navigation pane of the Router Information page. ...
Page 42 - Configure QoS Policy
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 36 Configure QoS Policy QoS policies control how QoS manages network resources. To configure a QoS policy: 1. Click QoS Policy Page from the left navigation pane of the QoS Configuration page. This displays the ...
Page 44 - Reorder QoS Policies; To move a QoS policy:
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup QoS SIEMENS 38 Reorder QoS Policies To move a QoS policy: 1. On the QoS Policy Setting page, select the policy you want to move in the IP Policy List drop-down menu and click Move . This expands the QoS Policy Setting page....
Page 45 - To configure additional routing tables:; Routing Table Configuration; on the left navigation pane of the Router Information page. This; Interface; drop-down menu, select the interface you want to configure.; Select; . This displays the Remote File Setup page.; Save
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Routing Table Configuration SIEMENS 39 Routing Table Configuration Every host has a default routing table that it uses to determine which physical interface address to use for outgoing IP traffic. The router supports virtua...
Page 46 - Dial Backup; Internal Modem
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Dial Backup SIEMENS 40 Dial Backup Use the Dial Backup option to configure a backup connection to the Internet through an internal V.90 (model 5835 only) or an external asynchronous modem connected to the console port. This...
Page 48 - External Modem
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Dial Backup SIEMENS 42 External Modem The following Dial Backup Configuration page is displayed during Dial Backup configuration if you selected External Modem for the connection. To configure the external modem for dial ba...
Page 49 - To manage the switches using the web interface, click; Switch Management; on the left navigation pane of the
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 43 Switch Management Each router provides four or eight Ethernet 10/100 switching ports for connection to the local area network (LAN). These RJ-45 ports are located on the rear panel and have indi...
Page 50 - Switch Mirror Configuration; To configure port traffic mirroring:
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 44 Switch Mirror Configuration The router supports traffic mirroring on the Ethernet switch. This means that Ethernet traffic from any of the Ethernet ports is mirrored to a target port for analysi...
Page 51 - Switch Age Time; To configure Switch Age Time:; Aging Time Configuration; Switch Aging Time Configuration page.; Apply
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Switch Management SIEMENS 45 Switch Age Time The Switch Age Time specifies the aging time of the switch. When the age time expires, the port MAC address entry is removed from the table containing this information. To config...
Page 52 - Command Line Interface; the Execute a CLI command page.; Execute; . The response will be displayed in the Output Window.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup Command Line Interface SIEMENS 46 Command Line Interface Use the Command Line Interface option to use the web interface to enter CLI commands. (Refer to the Command Line Interface Guide for available commands.) To execute a...
Page 53 - File Editor
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 5 Advanced Setup File Editor SIEMENS 47 File Editor Use the File Editor to create and edit files stored on the router. These files contain configuration and other data used by the router. For advanced users who understand the file formats a...
Page 54 - Chapter 6; Security Setup; Start an IPSec session.
SIEMENS 48 Chapter 6 Security Setup This chapter describes how to configure security features on the router. Security features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page. NAT Network Address Translation provides a l...
Page 55 - NAT
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup NAT SIEMENS 49 NAT Network Address Translation (NAT) provides a level of security by hiding the private IP addresses of your LAN behind the single public IP address of your router. All connections pass through the router an...
Page 56 - SNMP; community
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup SNMP SIEMENS 50 SNMP Simple Network Management Protocol (SNMP) exchanges messages between a management client and a management agent. Messages contain requests to get and set variables that exist in network nodes, thus allo...
Page 57 - SNMP IP Filter; , enter the first IP address in the range to be filtered.; SNMP Password
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup SNMP SIEMENS 51 SNMP IP Filter Activating an IP Filter range will limit SNMP requests to only those that originate from the designated addresses or LAN. To activate IP filtering: 1. Click SNMP IP Filter from the SNMP Config...
Page 58 - To access the Secure Shell configuration pages, click; Secure Shell; from the left navigation pane on the
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 52 Secure Shell Secure Shell (SSH) secures network services over an insecure network such as the public Internet. The objective of SSH is to make a secure functional equivalent for telnet. Telnet connec...
Page 59 - Configure SSH; Key Generator
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 53 Configure SSH To configure Secure Shell settings: 1. Click Configure SSH from the Secure Shell (SSH) Configuration List page. This displays the Configure Secure Shell (SSH) page. 2. For Status , sele...
Page 60 - Load Keys
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 54 Load Keys Diffie-Hellman is the key exchange system used for authentication in the establishment and maintenance of SSH connections. The key exchange requires a Public Key and a Private Key. This key...
Page 61 - Key Generator Status
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Secure Shell SIEMENS 55 Key Generator Diffie-Hellman is the key exchange system used for authentication in the establishment and maintenance of SSH connections. The Key exchange requires a Public key and a Private key. This...
Page 62 - Firewall Scripts; To load a firewall script, perform the following:
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Firewall Scripts SIEMENS 56 Firewall Scripts A firewall is any combination of hardware and software that secures a network and traffic to prevent interception or intrusion. The router has built-in firewall capabilities to s...
Page 63 - Stateful Firewall; This section describes how to perform the following tasks.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 57 Stateful Firewall Stateful Firewall varies from the IP Filtering Firewall in that it gathers and maintains state information about each session. IP Filtering Firewall examines the packet’s heade...
Page 64 - Configure Stateful Firewall
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 58 Configure Stateful Firewall To configure the Stateful Firewall: 1. Click Stateful Firewall from the left navigation pane of the Router Information page. This displays the Stateful Firewall Confi...
Page 65 - View Dropped Packets; To view the most recent dropped packets:; Dropped Packe; displays the Firewall Dropped Packet List page.; Specify the number of dropped packets to view; from 1 to 200. Netscape 4 users, may have to wait a; Default; to view the most recent 200 dropped packets.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 59 View Dropped Packets To view the most recent dropped packets: 1. Click Dropped Packe ts from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Drop...
Page 66 - Configure Firewall Rules
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 60 Configure Firewall Rules To configure firewall rules: 1. Click Firewall Rules from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Rule Configura...
Page 68 - Delete Firewall Rules; To delete firewall rules:; Firewall Rules; the Firewall Rule Configuration page.; Delete; . This expands the Firewall Rule Configuration page.; from
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup Stateful Firewall SIEMENS 62 Delete Firewall Rules To delete firewall rules: 1. Click Firewall Rules from the left navigation pane of the Stateful Firewall Configuration page. This displays the Firewall Rule Configuration p...
Page 69 - IKE/IPSec Configuration; displays the IKE/IPSec Information page.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 63 IKE/IPSec Configuration IKE/IPSec (Internet Key Exchange/Internet Protocol Security) provides authentication and encryption of IP traffic for the authenticity, integrity and privacy of you...
Page 70 - IKE Peer Name; peer. Choose a name that is meaningful to you.; Peer Gateway IP Address; , enter the IP address of the gateway at the remote end of the IKE; Destination IP Address; authenticate using this IKE policy.; Destination Subnet Mask; system will authenticate using this IKE policy.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 64 Easy IKE/IPSec Setup Internet Key Exchange (IKE) is a means of dynamically creating IP Security (IPSec) connections. IPSec uses encryption and authentication to virtual private networks ov...
Page 71 - Advanced IKE/IPSec Setup; from the left navigation; Create; button for each category to create new IKE and IPSec
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 65 Advanced IKE/IPSec Setup The Advanced IKE/IPSec Setup page presents information about current IKE and IPSec peers, policies and proposals. To perform Advanced IKE/IPSec setup, click Advanc...
Page 72 - IKE Peers Definition
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 66 IKE Peers Definition IKE peers are those devices known to your internal modem as capable of participating in IKE connections. To define a new IKE Peer: 1. Click Create next to IKE Peers fr...
Page 73 - IKE Proposals Definition
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 67 IKE Proposals Definition IKE I proposals specify how packets will be encrypted/authenticated for Phase I. To define a new IKE proposal: 1. Click Create next to IKE Proposals from the Advan...
Page 74 - IKE IPSec Proposals Definition; IPSec Proposal Definition page.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 68 IKE IPSec Proposals Definition IKE IPSec Proposals specify how packets will be encrypted/authenticated for the final SA. To define a new IKE IPSec proposal: 1. Click Create next to IKE IPS...
Page 76 - IKE IPSec Policies Definition; IPSec Policy Definition page.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 70 IKE IPSec Policies Definition IPSec policies are criteria for packets that IPSec will recognize, and actions that IPSec will take upon recognition. To define a new IKE IPSec policy: 1. Cli...
Page 77 - connect using this policy.; will connect using this policy.; Source Port
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup IKE/IPSec Configuration SIEMENS 71 9. In Destination IP Address , enter the IP address of the remote private network to which your router will connect using this policy. 10. In Destination Subnet Mask , enter the subnet mas...
Page 78 - To start an IPSec session:; VPN Log On; , select the tunnel you wish to use for the IPSec session.; log on; corresponding to the tunnel you selected.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 6 Security Setup VPN Log On SIEMENS 72 VPN Log On VPN Log On starts an IPSec session. IPSec sessions are initiated through Security Associations (SAs), which allow peers to negotiate a common set of security attributes that assures source a...
Page 79 - Chapter 7; Monitoring Router; To view system summary information, click; System Summary; on the left navigation pane of the Router
SIEMENS 73 Chapter 7 Monitoring Router This chapter describes how to monitor the health of your router connections. Router health can be monitored using the following functions. System Summary To view system summary information, click System Summary on the left navigation pane of the Router Informat...
Page 80 - Ethernet Interface Information; Ethernet Info; Remote Connection Information; Click; Remote Info; remote connections for all entries in the Remote Router database.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router System Summary SIEMENS 74 Ethernet Interface Information Click Ethernet Info on the left navigation pane of the System Summary page to display information about the Ethernet interface. Remote Connection Information Click...
Page 81 - IP Routing Information; IP Routing Info; the active interfaces in the IP routing table.; System Information; System Info; select system settings.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router System Summary SIEMENS 75 IP Routing Information Click IP Routing Info on the left navigation pane of the System Summary page to display information about the active interfaces in the IP routing table. System Information...
Page 82 - Diagnostics; PPPoE Session; PPPoE session; from the drop down menu and click; to display PPPoE session information.
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 76 Diagnostics The Diagnostic feature provides information about various components of your system that might help in diagnosing a problem. To run diagnostics, click Diagnostics on the left navigation...
Page 83 - Interface Information; Interface information; ATM Statistics
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 77 Interface Information Select Interface information from the drop down menu and click Execute to display interface information. ATM Statistics Select ATM Statistics from the drop down menu and click...
Page 84 - Routing Table Information; Routing Table information; Files Information; Files information
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 78 Routing Table Information Select Routing Table information from the drop down menu and click Execute to display information about the configured routing tables. Files Information Select Files infor...
Page 85 - Memory Usage; Memory usage; List All Configuration Data; List all configuration data
SIEMENS se5880 Ethernet Security RouterUser’s Guide Chapter 7 Monitoring Router Diagnostics SIEMENS 79 Memory Usage Select Memory usage from the drop down menu and click Execute to display memory usage information. List All Configuration Data Select List all configuration data from the drop down men...
Siemens HF35M630/01
User Manual
Siemens 1015N-2MFM-1A
Manual
Siemens 108
User Manual
Siemens 11
User Manual
Siemens 1168
User Manual
Siemens 120 Series
User Manual
Siemens 125-1957
User Manual
Siemens 125-3584T
User Manual
Siemens 125-5033
User Manual
Siemens 140
User Manual
Siemens 175V
User Manual
Siemens 18inc Freezer Tower with Dispenser
User Manual
Siemens 18inc Wine Tower
User Manual
Siemens 1G03QB 630G
User Manual
Siemens 2 D SP
User Manual
Siemens 2000
User Manual
Siemens 2010 Tango
User Manual