Siemens SCALANCE X-100 - Manuals

Introduction 1.1 On the Operating Instructions SCALANCE X-100 6 Operating Instructions, 07/2014, A2B00060666-05 Audience These Operating Instructions are intended for persons who commission networks with the IE switches of the SCALANCE X-100 product line. SIMATIC NET glossary Explanations of many of...

Introduction 1.2 On the product SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 7 1.2 On the product What is possible? The devices of the SCALANCE X100 product line allow the cost-effective installation of Industrial Ethernet bus and star structures with switching functionality. With ...

Introduction 1.2 On the product SCALANCE X-100 8 Operating Instructions, 07/2014, A2B00060666-05 Components of the product The following components are supplied with a SCALANCE X-100: ● IE Switch SCALANCE X-100 ● 2-pin plug-in terminal block (signaling contact) ● 4-pin plug-in terminal block (power ...

Introduction 1.2 On the product SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 9 Unpacking and checking WARNING Do not use any parts that show evidence of damage If you use damaged parts, there is no guarantee that the device will function according to the specification. If you use d...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 11 Network topologies 2 Switching technology allows extensive networks to be set up with numerous nodes and simplifies network expansion. Which topologies can be implemented? Using the IE switches of the SCALANCE X-100 product line, you ...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 13 Description of the device 3 3.1 Overview of the SCALANCE X-100 Table 3- 1 Overview of the product characteristics Device type SCALANCE X104-2 X106-1 X108 X108PoE X112-2 X116 X124 SIMATIC environment + + + + + + + Diagnostics LED + + +...

Description of the device 3.2 Product properties SCALANCE X-100 14 Operating Instructions, 07/2014, A2B00060666-05 3.2 Product properties 3.2.1 SCALANCE X104-2 Possible connections The SCALANCE X104-2 has four RJ-45 jacks and two BFOC sockets for the connection of end devices or other network segmen...

Description of the device 3.3 TP ports (twisted pair) SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 21 3.3 TP ports (twisted pair) RJ-45 connector pinout With SCALANCE X-100, the twisted-pair port is designed as an RJ-45 jack with MDI-X pin assignment (Medium Dependent Interface Aut...

Description of the device 3.3 TP ports (twisted pair) SCALANCE X-100 22 Operating Instructions, 07/2014, A2B00060666-05 Note Permitted cable lengths TP cords or TP-XP cords with a maximum length of 10 m can be connected to the TP port with the RJ-45 jack. With the IE FC cables and IE FC RJ-45 plugs ...

Description of the device 3.4 FO port (fiber optic) SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 23 3.4 FO port (fiber optic) Transmission speed The transmission speed of the optical Fast Ethernet ports is 100 Mbps. Transmission technique The transmission mode for 100Base-FX is spe...

Description of the device 3.5 LEDs SCALANCE X-100 24 Operating Instructions, 07/2014, A2B00060666-05 3.5 LEDs Fault LED "F" (red LED) The fault LED indicates the incorrect functioning of the device. LED color LED status Meaning Red Lit The SCALANCE switch X-100 detects a fault. At the same t...

Description of the device 3.6 SET button SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 25 3.6 SET button Function With the SET button, you can display and change the set fault mask. Setting the fault mask Factory setting When supplied (factory defaults), the fault mask is set so tha...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 27 Assembly 4 4.1 Types of installation The devices can be installed in the following ways: ● Installation on a 35 mm DIN rail ● Installation on a SIMATIC S7-300 standard rail ● Wall mounting WARNING Ambient temperature between 55 °C and...

Assembly 4.2 Installation on a DIN rail SCALANCE X-100 28 Operating Instructions, 07/2014, A2B00060666-05 4.2 Installation on a DIN rail Installation To install the device on a 35 mm DIN rail complying with DIN EN 50022, follow the steps below: 1. Place the second housing guide of the device on the ...

Assembly 4.2 Installation on a DIN rail SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 29 Uninstalling To remove the device from the DIN rail, follow the steps below: 1. Disconnect all connected cables. 2. Release the DIN rail catch on the bottom of the device using a screwdriver. 3....

Assembly 4.3 Installation on a standard rail SCALANCE X-100 30 Operating Instructions, 07/2014, A2B00060666-05 4.3 Installation on a standard rail Installation on a SIMATIC S7-300 standard rail To install the device on an S7-300 standard rail, follow the steps below: 1. Place the first housing guide...

Assembly 4.4 Wall mounting SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 31 4.4 Wall mounting To mount the device on a wall, you require the following: ● 4 wall plugs, 6 mm in diameter and 30 mm long ● 4 screws 3.5 mm in diameter and 40 mm long To mount the device on a wall, follow ...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 33 Connecting up 5 5.1 Power supply The power supply is connected using a 4-pin plug-in terminal block. The power supply can be connected redundantly. Both inputs are isolated. There is no distribution of load. When a redundant power sup...

Connecting up 5.2 Signaling contact SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 35 5.2 Signaling contact The signaling contact is connected to a 2-pin plug-in terminal block. The signaling contact (relay contact) is a floating switch with which error/fault states can be signaled b...

Connecting up 5.3 Grounding SCALANCE X-100 36 Operating Instructions, 07/2014, A2B00060666-05 5.3 Grounding Installation on a DIN rail The device is grounded over the DIN rail. S7 standard rail The device is grounded over its rear panel and the neck of the screw. Wall mounting The device is grounded...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 39 Maintenance and troubleshooting 6 6.1 Possible sources of problems and how to deal with them Fuses Some of the Industrial Ethernet switches of the SCALANCE X-100 product line have a resettable fuse / PTC. If the fuse triggers (all LED...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 41 Technical specifications 7 7.1 SCALANCE X104-2 Table 7- 1 Technical specifications of the SCALANCE X104-2 Technical specifications Order number SCALANCE X104-2 6GK5104-2BB00-2AA3 Connection to Industrial Ethernet Number 4 Design RJ-45...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 63 Certifications and approvals 8 The SIMATIC NET products described in these Operating Instructions have the approvals listed below. Note Issued approvals on the type plate of the device The specified approvals apply only when the corre...

Certifications and approvals SCALANCE X-100 64 Operating Instructions, 07/2014, A2B00060666-05 Notes for the Manufacturers of Machines The devices are not machines in the sense of the EC Machinery Directive. There is therefore no declaration of conformity relating to the EC Machinery Directive 2006/...

Certifications and approvals SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 65 IECEx The SIMATIC NET products meet the requirements of explosion protection according to IECEx. IECEx classification: Ex nA IIC T4 Gc DEK 14.0025X The products meet the requirements of the following stand...

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 67 Dimension drawings 9 Figure 9-1 Dimension drawing, rear of the SCALANCE X104-2, X106-1, X108, X108PoE

SCALANCE X-100 Operating Instructions, 07/2014, A2B00060666-05 73 Index A Accessories, 8 Approvals, 63 Auto polarity exchange, 22 Autonegotiation, 22 B Bending radii, 71 BFOC socket ST socket, 15 C CE mark, 63 Components of the product, 8 Connection to Industrial Ethernet, 41, 44, 47, 50, 53, 56, 59...