Page 2 - Industry Automation and Drive Technologies - SCE; Siemens Automation Cooperates
Industry Automation and Drive Technologies - SCE TIA Training Document Page 2 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C This manual was prepared for training purposes by Siemens AG for the project Siemens Automation Cooperates with ...
Page 3 - PAGE
Industry Automation and Drive Technologies - SCE TIA Training Document Page 3 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C PAGE 1 PREFACE ....................................................................................................
Page 5 - How to handle W indows; Fundamentals of; to 3 days Modules A
Industry Automation and Drive Technologies - SCE TIA Training Document Page 5 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 1 PREFACE Regarding its content, Module E11 is part of the instruction unit 'IT Communication with SIMATIC S7’ ....
Page 6 - Hardware and Software Required
Industry Automation and Drive Technologies - SCE TIA Training Document Page 6 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Hardware and Software Required 1 PC, operating system W indows XP Professional with SP2 or SP3/Vista 32 bit Ulti...
Page 7 - NOTES REGARDING THE USAGE OF CPU 315F-2 PN/DP; The second interface is an integrated PROFINET interface.
Industry Automation and Drive Technologies - SCE TIA Training Document Page 7 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 2 NOTES REGARDING THE USAGE OF CPU 315F-2 PN/DP The CPU 315F-2 PN/DP is a CPU that is shipped with 2 integrated ...
Page 8 - NOTES REGARDING THE SIMATIC RFID COMPONENTS; PROFINET IO cable
Industry Automation and Drive Technologies - SCE TIA Training Document Page 8 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 3 NOTES REGARDING THE SIMATIC RFID COMPONENTS The communication module RF180C is a module for operating RFID com...
Page 9 - RFID FUNDAMENTALS; ) makes it possible to automatically identify and localize
Industry Automation and Drive Technologies - SCE TIA Training Document Page 9 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 4 RFID FUNDAMENTALS Radio Frequency Identification ( RFID ) makes it possible to automatically identify and loca...
Page 10 - STARTING UP AN RFID PROJECT WITH CPU 315F-2 PN/DP AND RF180C; Below, the startup of an RFID project is described.; The data structure of the German language UDTs is as follows:
Industry Automation and Drive Technologies - SCE TIA Training Document Page 10 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5 STARTING UP AN RFID PROJECT WITH CPU 315F-2 PN/DP AND RF180C Below, the startup of an RFID project is describ...
Page 11 - Setting Up a New Project; The central tool in STEP 7 is the; ’SIMATIC Manager’; File
Industry Automation and Drive Technologies - SCE TIA Training Document Page 11 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.1 Setting Up a New Project 1. The central tool in STEP 7 is the ’SIMATIC Manager’ , which we call here with a...
Page 12 - ’Industrial Ethernet Subnet’
Industry Automation and Drive Technologies - SCE TIA Training Document Page 12 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 4. Highlight your project and insert an ’Industrial Ethernet Subnet’ ( → RFID_RF180C → Insert → Subnet → Indust...
Page 13 - Configuring the Hardware; W ith a double click, open the configuration tool for the; ’Hardware’; Open the hardware catalog by clicking on the symbol '; ’Mounting channel’; with a double click (; Note
Industry Automation and Drive Technologies - SCE TIA Training Document Page 13 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.2 Configuring the Hardware 6. W ith a double click, open the configuration tool for the ’Hardware’ . ( → Hard...
Page 14 - W e start with the power unit
Industry Automation and Drive Technologies - SCE TIA Training Document Page 14 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 8. From the hardware catalog, we can now select all modules that are present in the actual rack and insert them...
Page 15 - ’Subnet screen form’
Industry Automation and Drive Technologies - SCE TIA Training Document Page 15 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 9. Next, we drag the ’CPU 315F-2 PN/DP’ to the second slot. The order number and the version of the CPU are ins...
Page 16 - Value range for the IP address:
Industry Automation and Drive Technologies - SCE TIA Training Document Page 16 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Notes regarding networking on the Ethernet (additional information is provided in Appendix V of the training ma...
Page 18 - located on the front (; Now, we have to change the PROFINET device name to PN IOx100.
Industry Automation and Drive Technologies - SCE TIA Training Document Page 18 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 12. Now we drag the output module for 16 outputs to the 5th slot. The module’s order number is located on the f...
Page 19 - ’, the hardware configuration is saved and compiled.
Industry Automation and Drive Technologies - SCE TIA Training Document Page 19 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 14. Now, drag the PROFINET IO System (100) module tier toward the right and from the folder PROFINET IO, insert...
Page 20 - Assigning a Device Name; under Ethernet; Assign device name
Industry Automation and Drive Technologies - SCE TIA Training Document Page 20 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.3 Assigning a Device Name 17. First, highlight the module RF180C and then select, under the menu "Destina...
Page 21 - switch on the CPU should be on Stop (
Industry Automation and Drive Technologies - SCE TIA Training Document Page 21 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C This is what the completed hardware configuration with the associated addresses looks like 19. By clicking on '...
Page 22 - Inserting UDT Blocks and FB45
Industry Automation and Drive Technologies - SCE TIA Training Document Page 22 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.4 Inserting UDT Blocks and FB45 De-archive the library " RFID_FB45_UDT_Blocks “ from the template directo...
Page 23 - Generating Data Blocks; within the brackets.; Save and close DB48
Industry Automation and Drive Technologies - SCE TIA Training Document Page 23 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.5 Generating Data Blocks DB48 Write/Read Data Here, the source data of a write request to the transponder is ...
Page 24 - DB49 MDS Status Information; The start address in DB49 is “
Industry Automation and Drive Technologies - SCE TIA Training Document Page 24 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C DB49 MDS Status Information In DB49, the MDS status Information is entered. The information is stored in a data...
Page 25 - Save and close DB49
Industry Automation and Drive Technologies - SCE TIA Training Document Page 25 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Save and close DB49
Page 26 - DB50 Reader Status Information
Industry Automation and Drive Technologies - SCE TIA Training Document Page 26 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C DB50 Reader Status Information The reader status information is entered in DB50. Depending on the request, the ...
Page 27 - “ Reader status information and; Save and close DB50
Industry Automation and Drive Technologies - SCE TIA Training Document Page 27 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Data view of the Reader status in DB50 (UDT111) Byte 0 to 27 Data view of the Reader diagnosis in DB50 (UDT281)...
Page 28 - DB47 Request Data Block
Industry Automation and Drive Technologies - SCE TIA Training Document Page 28 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C DB47 Request Data Block The DB47 is set by means of the UDT11 in DB45. In DB47, a UDT21 is embedded for each re...
Page 29 - (Starting with byte 50, the commands for Reader2 or channel 2 start)
Industry Automation and Drive Technologies - SCE TIA Training Document Page 29 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Data View of DB47 (Starting with byte 50, the commands for Reader2 or channel 2 start) Save and close DB47
Page 30 - DB45 Reader Parameter Block
Industry Automation and Drive Technologies - SCE TIA Training Document Page 30 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C DB45 Reader Parameter Block Each MOBY channel (reader) needs its own parameters. These are predefined in a data...
Page 31 - Entries in DB45
Industry Automation and Drive Technologies - SCE TIA Training Document Page 31 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Entries in DB45 The base address for the RF180C is 256 (refer to hardware), here to be entered at address 0.0 a...
Page 32 - Save and close DB45
Industry Automation and Drive Technologies - SCE TIA Training Document Page 32 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Data view of DB45 starting with byte 34 (SLG = Reader) Save and close DB45 Note The inputs in the data block ar...
Page 33 - Programming a Restart or Warm Restart; “ is necessary after the following:; Open OB100 and enter the program
Industry Automation and Drive Technologies - SCE TIA Training Document Page 33 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.6 Programming a Restart or Warm Restart A restart of the MOBYIM (interface module) is carried out by setting ...
Page 34 - FC11 Function for a Command or Request
Industry Automation and Drive Technologies - SCE TIA Training Document Page 34 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.7 FC11 Function for a Command or Request Before starting a MOBY command with "command_start“ , we have to...
Page 35 - Enter Networks 1 to 6
Industry Automation and Drive Technologies - SCE TIA Training Document Page 35 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Enter Networks 1 to 6 Save and close FC11 Request or command Network 1 Command Network 2 Sub_Command Network 3 ...
Page 36 - Basics of Entries at Command Block FC11
Industry Automation and Drive Technologies - SCE TIA Training Document Page 36 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.8 Basics of Entries at Command Block FC11 The values for DB47 are specified by means of the input variables o...
Page 37 - Read out Reader status
Industry Automation and Drive Technologies - SCE TIA Training Document Page 37 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C was read. Initialize Transponder Command (hex) Sub_command length [dec] address_MDS [hex] DAT_DB [dec] Comment ...
Page 38 - Transponder Status
Industry Automation and Drive Technologies - SCE TIA Training Document Page 38 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C pause with the MDS ¹ remains set Switching the reader aerial on/off Command (hex) Sub_command length [dec] addr...
Page 39 - Command String
Industry Automation and Drive Technologies - SCE TIA Training Document Page 39 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.9 Command String The user configures the command string by storing a corresponding number of UDT 21 one after...
Page 40 - Data view of the UDT11
Industry Automation and Drive Technologies - SCE TIA Training Document Page 40 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.10 Basics of FB45 and DB45 FB45 accesses DB45. In DB45, a UDT11 is embedded for each reader. Data view of the...
Page 41 - Variable; Notes; Parameter “
Industry Automation and Drive Technologies - SCE TIA Training Document Page 41 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Input Parameters of the UDT11 The user has to enter these variables during configuration (exception: command_DB...
Page 44 - “ value = 2 to reset the red flashing of the error LED at the reader with
Industry Automation and Drive Technologies - SCE TIA Training Document Page 44 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Notes Parameter " option_1 “ value = 2 to reset the red flashing of the error LED at the reader with “Init_...
Page 45 - MOBY U
Industry Automation and Drive Technologies - SCE TIA Training Document Page 45 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Variable Description multitag MOBY U/D or RF300; maximum number of MDS processed in parallel in the field. Perm...
Page 46 - Relative address in UDT 10
Industry Automation and Drive Technologies - SCE TIA Training Document Page 46 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Command and Status Word "BEST" The control bits of FB45 are defined in the command and status word. The...
Page 47 - the user
Industry Automation and Drive Technologies - SCE TIA Training Document Page 47 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Control bits from Bit0 to Bit7 Variable Description cancel True =interruption of a current command or a command...
Page 49 - Only MOBY I; MOBY I
Industry Automation and Drive Technologies - SCE TIA Training Document Page 49 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Control bits from Bit8 to Bit15 Variable Description ANZ_MDS_present Indicates the presence of an MDS in the tr...
Page 50 - Additional indications
Industry Automation and Drive Technologies - SCE TIA Training Document Page 50 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Additional indications The displays indicate to the user the progress of a command. Error analyses are easy to ...
Page 51 - FB10 Reader_Control Program
Industry Automation and Drive Technologies - SCE TIA Training Document Page 51 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.11 FB10 Reader_Control Program Now, we are going to program the following in FB10: the control program for th...
Page 52 - Then, set up STAT variables; Network 1
Industry Automation and Drive Technologies - SCE TIA Training Document Page 52 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Then, set up STAT variables Next, set up TEMP variables Networks 1 to 3 Reader block Command start Network 1 Ne...
Page 53 - Networks 4 to 8; in Network 7 and the; Change to multi-instance call; Network 5; time
Industry Automation and Drive Technologies - SCE TIA Training Document Page 53 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Networks 4 to 8 Note regarding networks 7and 8: The switch-on delay TON (SFB4) in Network 7 and the FB45 call i...
Page 54 - Save and close FB10
Industry Automation and Drive Technologies - SCE TIA Training Document Page 54 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Save and close FB10
Page 55 - FB1 Control Program; W ith the; Supplementing the symbol table
Industry Automation and Drive Technologies - SCE TIA Training Document Page 55 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.12 FB1 Control Program It is now possible to generate the control program with the completed blocks. Task: In...
Page 57 - Setting up TEMP Variables
Industry Automation and Drive Technologies - SCE TIA Training Document Page 57 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Setting up TEMP Variables Network 1 to 2 FB10 is inserted as a multi-instance block.
Page 58 - Network 3
Industry Automation and Drive Technologies - SCE TIA Training Document Page 58 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Network 3
Page 59 - Network 4 to 5
Industry Automation and Drive Technologies - SCE TIA Training Document Page 59 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Network 4 to 5
Page 60 - Network 6
Industry Automation and Drive Technologies - SCE TIA Training Document Page 60 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C Network 6 Save and close FB1
Page 61 - OB1 Program Call
Industry Automation and Drive Technologies - SCE TIA Training Document Page 61 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.13 OB1 Program Call Double click on OB1 in the project window, or open the object properties of OB1 and enter...
Page 64 - Symbol Table
Industry Automation and Drive Technologies - SCE TIA Training Document Page 64 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.16 Symbol Table
Page 65 - Block Folder
Industry Automation and Drive Technologies - SCE TIA Training Document Page 65 of 65 Module E11 Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and RF180C 5.17 Block Folder 5.18 DB49 Data View
Siemens HF35M630/01
User Manual
Siemens 1015N-2MFM-1A
Manual
Siemens 108
User Manual
Siemens 11
User Manual
Siemens 1168
User Manual
Siemens 120 Series
User Manual
Siemens 125-1957
User Manual
Siemens 125-3584T
User Manual
Siemens 125-5033
User Manual
Siemens 140
User Manual
Siemens 175V
User Manual
Siemens 18inc Freezer Tower with Dispenser
User Manual
Siemens 18inc Wine Tower
User Manual
Siemens 1G03QB 630G
User Manual
Siemens 2 D SP
User Manual
Siemens 2000
User Manual
Siemens 2010 Tango
User Manual