Siemens S45 - Manuals - manualsarea.com

Page 2 - for details and updates

Checkout: http://www.tcpipchip.com for details and updates 2

Page 4 - Electrical Characteristics; Symbol; Pin Description; LQFP

Electrical Characteristics Symbol Description Min Type Max Unit VIL Input Low Voltage -0.5 0.9 V. VIH Input High Voltage 1.9 5.5 V. VIH_ Input High Voltage XTAL1,RST 3.5 5.5 V. Icc Power supply current 60 mA Vcc Power supply voltage 4.75 5.25 V. Pin Description Symbol PLCC LQFP In/Out Name and Funct...

Page 5 - TCP/IP Software Specifications; Typical testing circuit

TCP/IP Software Specifications Maximum at+i command length (include at+i itself) 256 bytes Maximum TCP segment size 512 bytes Serial RX buffer length (Ring buffer) 2,500 bytes Serial TX buffer length 1,000 bytes Domain name support FTP Not support PAP Support CHAP Not support TCP time-out Variable (...

Page 6 - Summary of basic Commands; Command; Open a PPP connection; Display a current assigned IP address; Response

Summary of basic Commands • 19,200 BPS command baud rate (MCU TCP/IP Chip) • 1 ,200-57,600 BPS GPRS/modem baud rate. ( TCP/IP Chip GPRS/Modem ) TCP/IP Chip test Command : at+i<CR> Response: +I_OK Open a PPP connection Command: at+iopen<CR> Response: - Success +I_OK - Not success +I_ERROR...

Page 8 - Display PPP user name; David; Display PPP password; David password; Request for a web page; header; length; field; date; field

Display PPP user name Command: at+isetuser=?<CR> Response: <USER NAME> +I_OK Example: at+isetuser=? <CR> David +I_OK Set up PPP password Command: at+isetpass=<password><CR> Response: +I_OK Example: at+isetpass=David password<CR> +I_OK Display PPP password Command:...

Page 9 - Close the existing connection first with; Read the software version

Example: at+ihttp://www.google.com /l<CR> +I_OK Content-Length:2998 <html><head><meta http-equiv="content-type" content="text/html; charset=windows- 874"><title>Google</title><style><!-- body,td,a,p,.h{font-family:;} .h{font-size: 20px;} ....

Page 10 - Bypass AT command to modem; OK; Respo; Stop DEBUG mode; cp

Bypass AT command to modem Just type any AT commands then TNS010 will bypass to modem. Command: at<parameter><CR> Response : < MODEM RESPONSE > Example: at+cgdcont=1,”ip”,”internet”<CR> OK ***** AT commands should not issue after TCP/IP is connected. if need to do, you should...

Page 11 - Baud rate value list:; Display GPRS/modem interfacing baud rate; This can be done by feeding a logic level on the GPRS/modem; TNS010 GPRS Development board

Set up GPRS/modem interfacing baud rate Command: at+isetbaud=<baud rate><CR> Response: +I_OK Baud rate value list: 576 = 57600 (default) 384 = 38400 192 = 19200 096 = 9600 048 = 4800 012 = 1200 Example: at+isetbaud=096<CR> +I_OK Display GPRS/modem interfacing baud rate Command: at+...

Page 12 - schematic

TNS010 GPRS Development board (DEV-010-A) schematic 12

Page 13 - GPRS phone data link connector details; Siemens S45 connector’s pin out

GPRS phone data link connector details Siemens S45 connector’s pin out 1. Gnd 2. – 3. Charge 4. – 5. Tx (out from phone) 6. Rx (into phone ) 7. – 8. – 9. – 10. – 11. – 12. – Ericsson T65/68 connector’s pin out 1. Charge 2. Gnd 3. – 4. Gnd 5. – 6. – 7. TX (out from phone) 8. RX (into phone) 9. Power ...

Page 14 - Quick Start Guide; GPRS phone; or; Testing phone parameters

Quick Start Guide GPRS phone or GPRS module ? pricing is our prime concern and is the reason why we opt to go with GPRS phones. By comparing to other existing GPRS modules such as an MC35, these 2 GPRS phone examples choices are much more affordable and much more available in the market. • Ericsson ...