Siemens ET 7Y Series - Manuals

Distributed automation 5 Distributed fieldbus systems are elementary components of the automation landscape. Communication is per-formed at the field level with PROFIBUS and PROFINET – these systems ensure rapid data transfer between the components and consistent decentralization of the auto-mation ...

6 Product range at a glance Product range at a glance SIMATIC ET 200S – The multitalent with a comprehensive range of functions ■ Bit-modular design with multi-conductor connection ■ Multifunctional thanks to a wide range of modules: Motor starters, freq.converters, safety technology, distributed in...

8 System features Simple installation and system-wide engineering Simple configuration Integral plug connections make installation quick and easy and therefore reduce the costs. In the case of modular sys-tems, mounting is on a rail. The modules are snapped onto the rail and plugged into each other....

System features 9 Hot swapping In the event of a fault, electronic modules are easily replaced during operation with the equipment live (hot swapping). The station remains functional, and the plant therefore re-mains available – there is no need for costly shutting down and starting up of the plant....

10 System features Integral safety engineering – SIMATIC Safety Integrated Until recently it has been common to implement safety tasks and standard tasks using different systems. This led to discontinuous systems and additional outlay. With SIMATIC, however, the safety system is directly integrated ...

System features 11 Use in hazardous areas In many industries, the manufacture, processing, trans-port or storage of combustible materials results in the cre-ation or release of gases, vapors or mist into the environment. Other processes create combustible dust. In combination with oxygen in the air,...

12 System features Mastering fast processes through isochronous mode Distributed solutions applying isochronous mode guaran-tee extremely high accuracy as well as fast and reliable processing sequences. This is particularly important for controlling drives. In order to control high-speed machines, p...

System features 13 SIMATIC ET 200 Configurator Just a mouse click away from a tailor-made I/O station: With the SIMATIC ET 200 Configurator With the ET 200 Configurator, you get first class support with configuring your ET 200 station. The software tool guides you comfortably, easily and convenientl...

14 Product Overview Product OverviewSIMATIC ET 200 for the control cabinet IO system ET 200S ET 200M ET 200L ET 200iSP Setup Degree of protection IP20 IP20 IP20 IP30 Design Bit modular, expandable block Modular Block Modular Assembly Standard rail Mounting rail Standard rail Mounting rail Connection...

Product Overview 15 SIMATIC ET 200 without a control cabinet IO system ET 200pro ET 200eco ET 200R Setup Degree of protection IP65/66/67 IP65/67 IP65 Design modular Block Block Assembly Mounting rail Direct mounting Direct mounting Connection system for sensors/actuators M12 M12 M12 Special applicat...

16 SIMATIC ET 200S SIMATIC ET 200S The multi-talent with the comprehensive module spectrum SIMATIC ET 200S is the multifunctional and bit-modular I/O system with IP20 degree of protection that can be exactly tailored to the automation task. Thanks to its rugged design, it can also be used under cond...

SIMATIC ET 200S 17 Electronic module Terminal module TM-D withintegrated energy bus PE/N module Bus termination module Terminal modules Interface moduleIM 151 Power module PM-E Power module PM-D Motor starter Low-cost, bit-modular design with multi-conductor connection In addition to the extremely l...

18 SIMATIC ET 200S Interface modules for bus connection ET 200 S is connected to the bus system via the interface mod-ule – either to the well-proven PROFIBUS or to PROFINET, the open Industrial Ethernet standard. Different interface modules are available for selection: 1) Plastic, polymer-cladded f...

SIMATIC ET 200S 19 Distributed intelligence The IM 151-7 CPU can be used in stand-alone mode as well as for distributed automation solutions with a medium-sized pro-gram. It corresponds to a CPU 314 and supports distributed preprocessing of the production data locally – it is also avail-able in a fa...

20 SIMATIC ET 200S Motor starters for any application The ET 200S motor starters can be used to protect and switch any three-phase load. The completely prewired de-vices are available in different performance classes as di-rect, reversing or soft-starters up to an output of 7.5 kW. The terminal modu...

SIMATIC ET 200S 21 Frequency converter for stepless speed control When stepless speed control of asynchronous motors up to 4 kW is required, the SIMATIC ET 200S FC frequency con-verter opens up new applications for the ET 200S I/O sys-tem in the field of drive technology. The frequency converter is ...

22 SIMATIC ET 200S 1) As SIPLUS component also for extended temperature range -25 °C to +60 °C and corrosive atmosphere/condensation (www.siemens.com/siplus). Module type Information Order No. group Power modules for electronics modules and motor starters For supplying and monitoring the load voltag...

SIMATIC ET 200S 23 I/O modules for special applications, accessories 1) As SIPLUS component also for extended temperature range -25 °C to +60 °C and corrosive atmosphere/condensation (www.siemens.com/siplus). Module type Information Order No. group Technological modules For the solution of technolog...

24 SIMATIC ET 200M SIMATIC ET 200MThe multi-channel S7-300 I/O The ET 200M distributed I/O station has a modular design with IP20 degree of protection. Up to 12 multi-channel sig-nal modules (e.g. 64 digital inputs) and function modules as well as communication processors of the S7-300 can be used a...

SIMATIC ET 200M 25 Interface modules for PROFIBUS and PROFINET The various S7-300 modules in the ET 200M distributed I/O system are connected to the bus system via the interface module – either to the proven PROFIBUS fieldbus or to PROFINET, the open Industrial Ethernet standard. The following inter...

SIMATIC ET 200iSP 29 SIMATIC ET 200iSP The intrinsically safe variant for hazardous areas ET 200S with redundant PROFIBUS connection ET 200iSP can be used in areas subject to explosion hazards with a gas or dust atmosphere: ■ The ET 200iSP station can be installed in Zones 1, 21 and 2, 22. ■ The con...

30 SIMATIC ET 200iSP Modular, intrinsically safe design The ET 200iSP is installed in just a few steps: ■ The terminal modules are snapped onto the rugged and well-proven S7-300 standard rail ■ Prewiring without electronics modules with spring-loaded and screw-type terminals ■ No need for tools, bec...

SIMATIC ET 200iSP 31 Basic modules for the configuration Powerful power supply The power supply with the ex-plosion-proof casing provides all the voltages and currents re-quired for operation of the ET 200iSP and feeds them into the backplane bus of the terminal modules. The 24 V supply is connected...

32 SIMATIC ET 200iSP Digital and analog electronics modules Input/output modules 4-channel and 8-channel digital and analog in-put/output modules (di-mensions: 30 x 125 x 136.5mm) are available for the ET 200iSP. The digital and analog pro-cess signals are matched to ET 200iSP via these elec-tronics...

SIMATIC ET 200iSP 33 Standards, approvals and accessories Control cabinets available as accessories The housings (control cabinets) are suitable for hazardous ar-eas of Zones 1 and 2 as well as 21 and 22. They either have surface treatment or are made of non-corrosive material. The permissible opera...

34 SIMATIC ET 200pro SIMATIC ET 200proCompact and multi-functional SIMATIC ET 200pro is an extremely small, rugged and high-performance I/O system with IP65/66/67 degree of protec-tion. It does not require a control cabinet and can be direct-ly mounted on the machine. Its modular and time-saving str...

36 SIMATIC ET 200pro Interface modules for PROFIBUS The interface modules (IMs) for PROFIBUS can be combined with three different modules for connecting the bus and pow-er supply. All connection modules for PROFIBUS have visible address setters that allow the addresses to be easily read as well as a...

SIMATIC ET 200pro 37 Interface module CPU module for PROFINET The interface module (IM) for PROFINET contains a 2-port switch for easy configuration of a line structure. There is an M12 connection for PROFINET and a 7/8" connection for the power supply. More parameters are possible per station u...

38 SIMATIC ET 200pro Electronic modules Pneumatic components Electronics modules Digital electronics modules with 4 and 8 channels for 24 V and analog electronics modules with 4 channels are available for voltage, current and resistance thermometers. Different connection modules are available for sc...

SIMATIC ET 200pro 39 Compact, intelligent motor starters The intelligent ET 200pro motor starters are used for start-ing and protecting motors and loads up to 5.5 kW. They are available in the versions electromechanical Standard and High Feature motor starters, and electronic High Feature motor star...

40 SIMATIC ET 200pro Frequency converters in two variants NEW SIMATIC ET200pro FC frequency converters designed as a SIMATIC module can be seamlessly integrated in the ET 200pro system. Two device variants (with and without safety functions) with a capacity of up to 1.1 kW (1.5 kW with reduced ambie...

SIMATIC ET 200eco 41 SIMATIC ET 200eco Digital block I/O in IP65/67 ET 200eco has a compact, rugged casing and is very easy to use. It can be connected to PROFIBUS DP at up to 12 Mbit/s. The plant availability is increased by the integrated T function-ality in the connection block. The electronic bl...

Accessories for PROFIBUS 43 Accessories for PROFIBUS Bus test unit BT 200 The SIMATIC ET 200 I/O systems offer powerful, multi-level di-agnostic systems within the framework of Totally Integrated Automation for faults that occur in the control system (system diagnostics). System faults are automatic...

44 Standards and approvals SIMATIC ET 200 Standards and approvals SIMATIC ET 200 Schutzarten Standards and approvals PROFIBUS EN 50 170, Volume 2 PROFINET IEC 61158 IEC 1131 IEC 1131, Part 2 UL acc. to UL508 standard, File No. E 116536/E 75310 (AC mod- ules) CSA Acc. to standard C22.2 No. 142. File ...

Degree of protection 45 Degree of protection Ingress Protection (IP) is a classification for degrees of pro-tection which are defined in IEC 60529 and DIN 40050. The standards describe the classification of degrees of protec-tion by means of housings for electrical equipment. They are used for opera...

References 47 SIMATIC ET 200S COMPACT Meyer Burger AG, Switzerland –Manufacturing and processing of materials Requirements Meyer Burger AG has over 50 years of experience in cutting hard and brittle materials and special crystals such as silicon and sapphire. The global sales and service network of ...

50 References SIMATIC ET 200pro mit Safety Integrated und PROFINET Volkswagen Nutzfahrzeuge, Germany –Vibrating roller test bed Requirements Volkswagen Nutzfahrzeuge (VWN), an autonomous brand of the Volkswagen corporation has installed the final noise test in the transporter works in Hanover in the...

Siemens AG Automation and DrivesIndustrial Automation SystemsPostfach 48 4890327 NÜRNBERGGERMANY w w w. s i e m e n s . c o m / e t 2 0 0 The information provided in this brochure contains descriptions or charac- teristics of performance which in case of actual use do not always apply as described o...