Siemens EA 746 Series - Manuals

Siemens EA 746 Series – User Manual in PDF format online.

Manuals:

User Manual

User Manual Siemens EA 746 Series

Summary

Page 2 - Product Numbers; WARNING; Service

Technical Instructions OpenAir GND Series Electronic Damper Actuator UL Listed Fire/Smoke Control Dampers Document No. 155-746 March 17, 2005 Product Numbers G Direct-coupled Electronic Fire and Smoke Damper Actuator N Spring Return 53 lb-in (6 Nm) D 15 second run time 1 24 Vac/dc 2 120 Vac 3 230 Va...

Page 3 - Specifications

OpenAir GND Series Electronic Damper Actuator UL Listed Fire/Smoke Control Dampers Technical Instructions Document No. 155-746 March 17, 2005 Specifications Power supply Operating voltage 24 Vac ±20% 24 Vdc +20%, -10% 120 Vac ±10% 230 Vac ±10% Frequency 50/60 Hz Power consumption 24 Vac/dc running 2...

Page 4 - Accessories; Determine and order; Operation; dedicated; smoke; Installation

Technical Instructions OpenAir GND Series Electronic Damper Actuator UL Listed Fire/Smoke Control Dampers Document No. 155-746 March 17, 2005 Accessories EA1 127R1 Figure 1. Electronic Fusible Link (EFL) ASK79.165 (165°F (74°C) operation) ASK79.212 (212°F (100°C) operation) ASK79.250 (250°F (121°C) ...

Page 5 - Wiring

OpenAir GND Series Electronic Damper Actuator UL Listed Fire/Smoke Control Dampers Technical Instructions Document No. 155-746 March 17, 2005 Wiring All wiring must conform to NEC and local codes and regulations. Function Color Supply Red Neutral Black Ground Green Wire Designations 24 Vac/dc M BLAC...

Page 7 - Dimensions

OpenAir GND Series Electronic Damper Actuator UL Listed Fire/Smoke Control Dampers Technical Instructions Document No. 155-746 March 17, 2005 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design impr...

Page 8 - OpenAirTM GGD Electronic Damper Actuator; Features; High temperature rated drive system.; Application; Type; Eight pack of standard

Technical Instructions Document No. 152-046P25 EA GGD-1 January, 9 2008 OpenAir™ GGD Electronic Damper Actuator Designed for UL Listed Fire/Smoke and Smoke Control Dampers 2-Position, 15-second Runtime 15-second Spring Return Time N474 Siemens Building Technologies, Inc. Description The OpenAir™ dir...

Page 9 - Figure 1; Warning/Caution Notations

Technical Instructions GGD Electronic Damper Actuator Designed for UL Listed Fire/Smoke Control Dampers Document No. 152-046P25 January 9, 2008 Page 2 of 4 Siemens Building Technologies, Inc. Specifications Power supply Operating voltage 24 Vac ±20% 115 Vac ±15% 230 Vac ±10% Frequency 50/60 Hz Power...

Page 10 - Installation Instructions; Function Color

GGD Electronic Damper Actuator Designed for UL Listed Fire/Smoke Control Dampers Technical Instructions Document No. 152-046P25 January 9, 2008 Siemens Building Technologies, Inc. Page 3 of 4 Accessories EA0500R1 985-006 Anti-rotation (mounting) bracket. EA0653R1 EA1059R1 985-004 Self-centering shaf...

Page 11 - Function

Technical Instructions GGD Electronic Damper Actuator Designed for UL Listed Fire/Smoke Control Dampers Document No. 152-046P25 January 9, 2008 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design im...

Page 12 - POWERSTM Controls; Description

POWERS™ Controls Technical Instructions Document No. 155-146P25 AP 331-1 September 18, 2008 No. 3 Pneumatic Damper Actuator 331-4312 Pivot Mounting 331-4313 Fixed Mounting 331-4311 Extended Shaft Mounting Description The POWERS Controls No. 3 Pneumatic Damper Actuator is a compact, totally enclosed,...

Page 13 - Page 2; Table 1. Product Numbers for No. 3 Pneumatic Damper Actuators.

Technical Instructions POWERS™ Controls No. 3 Pneumatic Damper Actuator Document Number 155-146P25 September 18, 2008 Page 2 Siemens Building Technologies, Inc. Table 1. Product Numbers for No. 3 Pneumatic Damper Actuators. Part No. Nominal Spring Range Description Mounting Style 3-7 psi (21-48 kPa)...

Page 14 - Operating

POWERS™ Controls No. 3 Pneumatic Damper Actuator Technical Instructions Document Number 155-146P25 September 18, 2008 Siemens Building Technologies, Inc. Page 3 Specifications, Continued Operating Nominal spring ranges 3 to 7 psi (21 to 50 kPa) 5 to 10 psi (35 to 69 kPa) 8 to 13 psi (55 to 90 kPa) O...

Page 15 - Page 4; Sizing

Technical Instructions POWERS™ Controls No. 3 Pneumatic Damper Actuator Document Number 155-146P25 September 18, 2008 Page 4 Siemens Building Technologies, Inc. Table 3. Thrust Torque Ratings. Maximum Thrust lb. (N) Torque Rating* lb-in (Nm) Full Stroke Forward 2-Position Operation Nominal Spring Ra...

Page 16 - Installation, Continued

POWERS™ Controls No. 3 Pneumatic Damper Actuator Technical Instructions Document Number 155-146P25 September 18, 2008 Siemens Building Technologies, Inc. Page 5 Installation, Continued Table 3. Damper Blade Rotation. Actuator Position in Relation to Damper Shaft Crank Position in Relation to Damper ...

Page 17 - Page 6; Item Description Item

Technical Instructions POWERS™ Controls No. 3 Pneumatic Damper Actuator Document Number 155-146P25 September 18, 2008 Page 6 Siemens Building Technologies, Inc. Installation, Continued Extended Shaft Mounting, Fixed Actuator For Actuators 331-4314, 331-4514, 331-4814 order Linkage Kit 331-958. For A...

Page 18 - 0 ° Rotation

POWERS™ Controls No. 3 Pneumatic Damper Actuator Technical Instructions Document Number 155-146P25 September 18, 2008 Siemens Building Technologies, Inc. Page 7 Installation, Continued Table 4. Crank Radius Connection. Dimensions X Y Application Crank Radius Connection Crank Hole Number 7-7/8 inch (...

Page 19 - Dimensions, Continued; Figure 6. Extended Shaft Mounting Bracket Dimensions.; Page 8

Technical Instructions POWERS™ Controls No. 3 Pneumatic Damper Actuator Document Number 155-146P25 September 18, 2008 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced....

Page 20 - Actuator Assembly; Page 1; All metal body construction

POWERS ™ Controls Technical Instructions Document No. 155-032P25 AP 331-2 October 10, 2005 No. 4 Pneumatic Damper Actuator Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000 Typical Page 1 Description The Powers Controls No. 4 Pneumatic Damper Actuator i...

Page 21 - UL Recognized Components for Fire/Smoke Applications.

Technical Instructions POWERS™ Controls No. 4 Pneumatic Damper Actuator Document Number 155-032P25 October 10, 2005 Page 2 Siemens Building Technologies, Inc. Warning/Caution Notations WARNING: Personal injury, or loss of life may occur if you do not follow a procedure as specified. CAUTION: Equipme...

Page 24 - Service Kit; of the; Actuator Sizing; Calculate the total torque required to move the damper:

POWERS™ Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document Number 155-032P25 October 10, 2005 Siemens Building Technologies, Inc. Page 5 Service Kit EPDM diaphragms (package of 5) 333-071 Figure 1. Actuator Jam Nut Location . WARNING: Do not remove the jam nut (Figure 1). Sprin...

Page 25 - Material

Technical Instructions POWERS™ Controls No. 4 Pneumatic Damper Actuator Document Number 155-032P25 October 10, 2005 Page 6 Siemens Building Technologies, Inc. Operation Standard Actuator (Figure 3) The air tubing from a controlling instrument connects to the actuator's upper housing. With no control...

Page 26 - Table 4. Mounting Plate Hole Identification.

POWERS™ Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document Number 155-032P25 October 10, 2005 Siemens Building Technologies, Inc. Page 7 Hesitation Actuator Adjustment Example: To obtain an initial hesitation point after one inch (25 mm) of shaft travel. 1. Add air pressure to ...

Page 27 - Table 5. Actuator Accessories Shown in Figure 6.

Technical Instructions POWERS™ Controls No. 4 Pneumatic Damper Actuator Document Number 155-032P25 October 10, 2005 Page 8 Siemens Building Technologies, Inc. Extended Shaft Mounting - Pivot Actuator, Continued 3. Slip the crank over the 3/8 through 1/2-inch (10 through 13-mm) diameter damper shaft ...

Page 28 - If the actuator assembly mounts to the

POWERS™ Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document Number 155-032P25 October 10, 2005 Siemens Building Technologies, Inc. Page 9 Extended Shaft Mounting - Fixed Actuator 1. Order one of the following damper actuators, the clevis, and linkage kit (Figure 8): Actuator wit...

Page 30 - Frame Mounting; Attach the mounting plate to the mounting lug.

POWERS™ Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document Number 155-032P25 October 10, 2005 Siemens Building Technologies, Inc. Page 11 Frame Mounting 1. Order one each of the following: Actuator assembly: 331-3000, 331-3001, 331-3002, 331-2973, or 331-3004 Mounting Lug: 331-...

Page 33 - Table 9. Stop Screw Adjustment and; IN; Figure 16. Mounting Bracket Dimensions.

Technical Instructions POWERS™ Controls No. 4 Pneumatic Damper Actuator Document Number 155-032P25 October 10, 2005 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. P...