Siemens E-110-I - Manuals - manualsarea.com

Page 2 - Before you begin; System Requirements

2 Before you begin Verify that the following items came with your SIEMENS ADSL C-110 kit: System Requirements Before starting the installation of the SIEMENS ADSL C-110, make sure your computer isequipped with: • Internet Browser (Internet Explorer or Netscape Version 4 or higher) • LAN interface (E...

Page 3 - Stand-alone Line Filter; For each device that shares the phone line as your ADSL account:

3 Step 1:Install the Line Filter Stand-alone Line Filter For each device that shares the phone line as your ADSL account: 1. Unplug the device’s cord from the phone jack. 2. Plug the filter into the phone jack. 3. Plug the phone cord (or other device cord)into the filter. Devices such as fax machine...

Page 6 - To install the USB driver proceed as follows:; Continue Anyway

6 Step 2b - part 2:Install the USB driver The USB driver is only working on the following operating system (OS):Windows 98 SE, Windows ME, Windows 2000 and Windows XP.Windows 98 SE users need the Windows 98 SE CD-ROM to complete the installation. To install the USB driver proceed as follows: 1 . Tur...

Page 7 - . If the following window appears click on; Next

7 3 . After a while the following windwo will apppear. Connect the USB cable to your SIEMENS ADSL C-110. The driver will be installed automatically. 4 . If the following window appears click on Next . Note for Windows 98 SE users: If prompted, you need to insert the Windows 98SE CD-ROM in your CD-RO...

Page 8 - Finish; Note for Windows XP users: You have to repeat step 4 and 5.

8 5 . If the following window appears click on Finish . 6 . After finishing the installation a new icon is displayed in the Taskbar. 7 . Proceed with step 3. (Read first the introduction and continue then with the paragraph related to your operating system). Note for Windows XP users: You have to re...

Page 9 - and double-click on the; System; Click the; Cancel

9 Step 3:Configure the PC (TCP/IP settings)Introduction In step 3, you will configure your computer to communicate with the SIEMENS ADSL C-110. To do this, you will need to configure your PC’s network settings to obtain an IP address auto-matically. Computers use IP addresses to communicate with eac...

Page 16 - Username

16 Step 5:Configure the Internet Access Once installation is complete on your PC, you need to configure the Internet access. To accessthe SIEMENS ADSL C-110 entry page proceed as follows: Accessing the modem entry page The modem state page is accessed via a web browser as follows: - Launch web brows...

Page 17 - Accessing the modem state page; The modem state page is accessed via a web browser as follows:; Modem State Information

17 Once installation is complete on your PC, it is possible to access the SIEMENS ADSL C-110state page, which displays the most important information on the configuration and state ofthe ADSL Bridge C-110. Accessing the modem state page The modem state page is accessed via a web browser as follows: ...

Page 18 - connection problems” and “Computer and ADSL modem”.; The DSL LNK LED is flashing; or USB connection between the PC and the ADSL modem.; Trouble shooting

18 If the solution proposed in this section does not resolve your problem, contact your networkadministrator or technical support. No LEDs come on when the modem is on 1. Check the connection between the power supply unit and the SIEMENS ADSL C-110. 2. Check that the mains socket and power supply un...

Page 19 - The ADSL modem cannot be reached with the PING command; USB interface are set to find the IP address automatically.; My homepage is not displayed when I launch the browser

19 3. Make sure that the user name and password entered are correct.4. Make a telephone call to ensure that there are no problems on the telephone line. The ADSL modem cannot be reached with the PING command 1. Check the connection used (Ethernet or USB) between your PC and the ADSL modem.2. Check t...

Page 20 - (Ethernet or USB) is working correctly and that the modem is on.; Glossary

20 1. Make sure that the connections to the ADSL modem are correct, that the port used (Ethernet or USB) is working correctly and that the modem is on. 2. Check that the IP address in the browser address bar is 192.168.1.1 10/10 0Base-T 10/100Base-T uses an unshielded UTP cable (category 5) for Fast...

Page 21 - Classical IP over ATM.; ISP

21 Domain name system. This is not an actual internet protocol, but a system for translatingnode names (for example www.nasa.org) into numerical addresses (for example192.168.2.1). DSL Digital Subscriber Line. Network Technology that transmits using a broad bandwidth overshort distances using tradit...

Page 23 - LED Indicators; LED

23 Step 6:Front panel system messages LED Indicators The ADSL Bridge modem is equipped with LEDs on the front as described in the table below(from left to right): LED Color Status Description PWR green OnOff Unit is powered onUnit is powered off DSL LNK green BlinkingConstant The modem is establishi...