Siemens Computer Hardware TM - Manuals

Page 2 - Chapter

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 2 of 21 Chapter Page 1 General Information ........................................................................................................................................ 3 2 What’s new ? ...........................................

Page 3 - General Information; Scope of delivery; CD content in general

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 3 of 21 1 General Information Scope of delivery This CD contains the following components for PCS7-OS versions V4.02 and V5.2: • TELEPERM M channel DLL • Image blocks in TELEPERM M NORA representation: PCS7/TM-OCX (NORA) • Image blocks i...

Page 4 - Trends by Means of Measurement Points (function of WinCC-LTO); This function will no longer be available from V5.0 onwards.; Creating the WinCC Tag Management

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 4 of 21 terminated. • Switchover of the Servers after CS 275 Coupling FaultWhen at least one connection to a subsidiary AS fails the multi-clients switch over to the redun-dant server. Attention ! An intentional switch off of a connectio...

Page 5 - General Information About the Installation; Requirements; Content of the CD; Contains the old driver software for the N_AT module; Installation using the Common Installation Mask

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 5 of 21 These blocks can be installed on demand by checking the component “Standard-OCX renoviert” in theinstallation program. 2.4 PCS7/TM-OCX (PCS7) (formerly: WinCC/TM-OCX (PCS7)) 2.4.1 Modifications vs. Version V2.01 None. 3 General I...

Page 7 - Installation of the TELEPERM M Channel DLL and Tools; The authorisation is supplied on a separate floppy disk.; What to do after the Installation ?

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 7 of 21 3.4 Installation of the TELEPERM M Channel DLL and Tools The TELEPERM M channel-DLL and tools package must be installed in the following WinCC comput-ers: - Single-user system, also ES- Client/ server system: in all servers, in t...

Page 8 - The authorization is supplied on a separate floppy disk.; Procedure of the manual installation

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 8 of 21 The image blocks in TELEPERM M-NORA representation and the authorization DLLs that are re-quired for proper operation are in the directory sw\OCX_TM on the CD. The authorization is supplied on a separate floppy disk. This package...

Page 12 - Documentation; The Acrobat Reader

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 12 of 21 4 Documentation Revised descriptions in pdf format are supplied in the dok\ directory on the delivery CD. Their contentsreplace the printed descriptions. • PCS 7/TM (Name of the document: WinCC/TM))Description of the TELEPERM M ...

Page 13 - Version Interdependencies; Program

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 13 of 21 5 Version Interdependencies Program Released Versions WinCC V4.02 + SP3 +HF1 V5.0/SP1 + HF5 V5.0/ SP2 +HF2_K5.2.58.2 V5.0 + SP2 + HF7 PCS7 V4 V5.0/SP1+HF2+HF5 V5.1 +HF2_K5.2.58.2 V5.2 PCS7/TM-OS V1.05 V2.00/ SP1 V2.01 V2.02 Wind...

Page 14 - Terminate WinCC and restart it afterwards.; ards are already included in the project !; reporting

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 14 of 21 • Terminate WinCC and restart it afterwards. • Start DynW izEdit. Read all four TELEPERM M wizards ("TELEPERM M Verbindung einrich- ten.wnf", ”TELEPERM M Import ORPA.wnf”, ”TELEPERM M Import Bausteine.wnf” and”TELEPERM M...

Page 15 - Creating a new PCS 7/TM project; Creating a Project for Multi-Client Operation on a Server

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 15 of 21 7 Creating a new PCS 7/TM project This explanation is valid for the language selection "German". Please observe the WinCC/ PCS 7product information ("ReleaseNotes").. 7.1 Creating a Project for Multi-Client Opera...

Page 16 - Across all servers with a total of 16 areas.

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 16 of 21 • Once the configuration has been completed, a package for the operation from a multi-client must be created under Serverdata. In the project, the package is created in the "Package" subdirectoryof the directory that bea...

Page 17 - Bus Parameters for PROFIBUS TM System Bus on ASx88/TM; Value

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 17 of 21 8 Bus Parameters for PROFIBUS TM System Bus on ASx88/TM and WinCC Parameterdescription DOS_CONF.DAT in AS488 andBridge L2AMPRO.INIin ASx88 Configura-tion dialog inWindows NTfor WinCC Value Highest station address l2_hsa l2_hsa H...

Page 18 - Important Notes; The access to ZKS blocks has not been implemented.

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 18 of 21 9 Important Notes 9.1 Permissible Installations Software products that are not mandatory for the operation of PCS7 must not be installed in servers,clients or multi-clients. This includes MS Office, for example. This shall preve...

Page 19 - S Strings in TML Blocks; A maximum of 64k variables may be created under an AS connection.; Troubleshooting; This button may not pressed at runtime in any case.

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 19 of 21 With manipulations in the AS it must be ensured that - depending on the measure - messages etc.may be lost via status message frames and/ or MKS message frames. Setting the AS in a definedstate first is therefor expedient. 9.9 S...

Page 20 - TELEPERM M in Intranet or Internet

Product Information PCS7/TM V2.02 24.10.2001  Siemens AG 2001 20 of 21 Device number 0 is reserved on all CS 275 busses and therefore may not be used. 9.17 TELEPERM M in Intranet or Internet Please refer to the following sites for current information about TELEPERM M, especially FAQs: Homepage (ext...