Siemens CL-110 - Manuals

ADSL Router User Manual ³ RFC2684 LLC Encapsulation and VC Multiplexing over AAL5 ³ RFC2364 Point-to-Point Protocol (PPP) over AAL5 ³ RFC2225 Classical IP and ARP over ATM ³ RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding and Client functions) ³ Support PPPoA or PPPoE Bridged mode (...

³ Firmware upgrades through HTTP, TFTP, or FTP ³ The boot loader contains very simple web page to allow the users to update the run-time firmware image. ³ Configuration file backup and restore ³ SNMPv1/v2 agent with MIB-II, ADSL Line MIB Unpacking Check the contents of the package against the pack c...

ADSL Router User Manual Subscription for ADSL Service To use the ADSL Router, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be give...

Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front...

Rear Panel The following figures illustrate the rear panel of your ADSL Router. Connector Description 9VAC 9 VAC Power connector Power switch Ethernet Ethernet RJ-45 connector USB USB connector (for the model with USB interface only) DSL RJ-11 connector 9 VAC

Chapter 2:System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the ADSL Router via Ethernet, the host computer must meet the following requirements: ™ With Ethernet network interface. ™ Must have TCP/IP installed. ™ Set client PC with obtain...

Connecting the ADSL Router Follow the steps below to connect the related devices. n Connecting the ADSL line. Connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. o Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router. p Connec...

Chapter 3: Configuration For connecting through a hub, please refer to the following diagram for an example. Install the USB Driver For Windows ME n Run the USB installation program from the CD provided by your device package. o An InstallShield Wizard will appear. Please wait for a moment. p When t...

o An InstallShield Wizard will appear. Please wait for a moment. p When the welcome screen appears, click Next for next step. q When the InstallShield Wizard Complete appears, click Finish . r Plug the USB cable between your device and PC.

Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. s The system will detect the USB driver automatically. Now, the system will copy the proper files for this device. t When the file copying fin...

p When the welcome screen appears, click Next for next step. q When the InstallShield Wizard Complete appears, click Finish . r Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is po...

Chapter 3: Configuration t The system is trying to find proper driver for your device and copying the files automatically. u After the file copying is finished, a completing message will appear. v You can use the device now. Uninstall the USB Driver For Windows ME For uninstall the USB driver, pleas...

For Windows 2000 For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: n Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu. o The InstallShield Wizard dialog will appear. p A dialog appears to ask you co...

The second way: n Choose Settings –Control Panel from the Start menu. Choose Add/Remove Programs . o A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove .

Chapter 3: Configuration p The InstallShield Wizard dialog will appear. q Unplug the USB cable between your device and your PC. Then click OK . r When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. Setting TCP/IP In order to access the Internet through...

For Windows 98 1. Click on the Start menu, point to Settings and click on Control Panel . 2. Double-click the Network icon 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add . Option 2: If y...

8. When returning to Network window, click OK 9. Wait for Windows copying files. 10. When prompted with System Settings Change dialog box, click Yes to restart your computer.

9. Wait for Windows copying files. 10. When prompted with the System Settings Change dialog box, click Yes to restart your computer. For Windows NT 1. Click Start , point to Settings , and then click Control Panel . 2. Double-click the Network icon. 3. The Network window appears. On the Protocols ta...

9. When returning to Network window, click Close . 10. When prompted with Network Settings Change dialog box, click Yes to restart your computer.

Chapter 3: Configuration For Windows 2000 1. From the Start menu, point to Settings and then click Network and Dial-up Connections. 2. Right-click the Local Area Connection icon and then click Properties . 3. On the General tab, check out the list of installed network components. Option 1: If you ha...

Configure PC to get IP address from DHCP If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure the client PCs to obtain a dynamic IP address. Please follow the previous section to install TCP/IP component. Only that you do not need to specify an IP address...

For Windows XP On the IP Address tab, select Obtain an IP address automatically . Then click OK . Renew IP Address on Client PC There is a chance that your PC does not renew its IP address after the ADSL Router is on line and the PC cannot access the Internet. Please follow the procedures below to r...

Chapter 3: Configuration 3. When the figure below appears, click Release and then Renew to get an IP address. For Windows NT 1. Select Run from the Start menu. 2. Select Run from the Start menu. 3. Type cmd in the dialog box and the click OK . 4. Type ipconfig at prompt. Then you will see the IP inf...

For Windows 2000 1. From the Start menu, point to Programs , Accessories and then click Command Prompt . 2. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 3. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ...

Chapter 3:Connecting and Accessing Internet Chapter 3: Connecting and Accessing Internet This chapter is to help you accessing into Internet with a quick and convenient way. If you need more detailed information for web configuration, please get into the next chapter for the advanced configuration. ...

Chapter 3:Accessing Internet PPP over ATM (PPPoA) Mode R D A I U S S e r v e r A A A BR AS S T M - 1 D S L A M Lo op D y n a m i c P u b l i c I P a s s i g n e d b y B R A S P P P o A + N A T + D H C P o n P r iv a t e L A N H u b A D S L R o u t e r E t h e r n e t P C( S ) 1 9 2 . 1 6 8 . 1 . 3 1...

Chapter 3:Accessing Internet PPP over Ethernet (PPPoE) Mode R D A I U S S e r v e r A A A B R A S S T M - 1 D S L A M L o o p D y n a m i c P u b l i c I Pa s s i g n e d b y B R A S P P P o E + N A T + D H C P o n P r i v a t e L A N H u b A D S LR o u t e r E t h e r n e t P C ( S ) 1 9 2 . 1 6 8 ...

PPP over Ethernet (PPPoE) IP Extension Mode R D A I U S S e r v e r A A A B R A S S T M - 1 D S L A M L o o p D y n a m i c P u b l i c I Pa s s i g n ed b y B R A S P P P o E I PE x t e n s i o n M o d e H u b A D S L R o u te r E t he r n e t P C ( S ) P P P o v e r E t h e r n e t D e f a u l t P...

Chapter 3:Accessing Internet Numbered IP over ATM (IPoA) R D A I U S S e r v e r A A A B R A S S T M - 1 D S L A M L o o p P u b l i c IP P r e - a s s i g n e d b y I S P H u b A D S LR o u t e r P C ( S ) I P o v e r A T M S / W D e f a u l t P r i v a t e I P 1 9 2 . 1 6 8 . 1 . 1 * B R A S : B r...

7. Check the network information. Make sure the settings match the settings provided by ISP. Click Finish . 8. Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg: IP Address: 10.3.75.51 Subnet Mask: 255.255.255.248 Gateway: 10.3.75.49 9. Now the router is we...

Chapter 3:Accessing Internet Bridge Mode R D A I U S S e r v e r A A A B RA S S T M -1 D S L A M L o op B r i d g e M o d e H u b A D S L R o u t e r P P P o EC l i e nt S /W P C ( S ) P P P o v e r E t h e r n e t D e f a u l t P r i v a t e I P 1 9 2 . 1 6 8 . 1 . 1 * B R A S : B r o a d b a n d R...

Chapter 5:Connection Mode Chapter 4: Web Configuration Some users might want to set specific configuration for the router such as firewall, data transmission rate… and so on. This chapter will provide you advanced information of the web pages for the router for your reference. Using Web-Based Manage...

Chapter 5:Connection Mode Outline of Web Manager For configure the web page, please use admin as the username and the password. The main screen will be shown as below. Title : It indicates the title of this management interface. Main Menu : Includes Quick Start, Status, Advanced and Management. Main...

Quick Start The pages for the Quick Start provide user a quick way to set for the router. If you do not know more about the router, you can use the Quick Start pages to adjust basic settings to make your router activating. Connect to Internet This is a quick way to connect to Internet by using PPPoE...

Chapter 5:Connection Mode After clicking on the Next button from the VPI/VCI web page, the following screen will appear. Please choose the connection type and encapsulation mode that you want to use and click Next for next page. For example, PPP over Ethernet (PPPoE) in this screen is selected. Next...

PPP over ATM/ PPP over Ethernet If the type you choose is PPP over ATM or PPP over Ethernet, please refer to the following information. According to the ISP’s configuration on the server, you can choose PPPoE and PPPoA modes. If the ISP provides PPPoE service, the connection type selection will be d...

PCs. Start IP Address: Type in the start point IP address. End IP Address: Type in the end point IP address. Leased Time: Type in the duration for the time. The default is 1day. DHCP Server Off: Check this item if DHCP service isn’t needed on the LAN. You can check it at this time. If you find somet...

Chapter 5:Connection Mode IP over ATM If the type you have to choose is IP over ATM, please refer to the following information. IPoA is an alternative of LAN emulation. It allows TCP/IP network to access ATM network and uses ATM quality of service’s features. Choose IPoA and click Next. None: If it ...

Bridging If the type you choose is Bridging , please refer to the following information. The bridging mode can configure your router to send packets received on any port such as ATM PVC or Ethernet with a broadcast MAC address to all other ports. Choose Bridging and click Next . None: If it is not n...

Chapter 5:Connection Mode Primary IP Address: Type in the IP address that you got from your ISP for LAN interface. Subnet Mask: Type in the subnet mask that you got from your ISP for LAN interface. MTU: It means the maximum size of the packet that transmitted in the network. The packet of the data g...

Status Overview This page is displaying the current status for the DSL connection. It includes if the lists the LAN IP address, default gateway, DNS servers IP address, firmware version, the period of activating the router, and so on. The system status will be changed according to the settings that ...

Chapter 5:Connection Mode ADSL Line This page shows all information for ADSL. For knowing the quality of the ADSL connection, please click ADSL BER Test button to have advanced information. Click More Information to show more detailed information about ADSL Line Status. ADSL BER Test This test deter...

When the test is over, the result will be shown on the following dialog for your reference. Click Close to close this dialog. Internet Connection This page displays the connection information for your router, such as PVC name, category, protocol, invoking NAT or not, IP address, link status and so o...

Advanced Setup Local Network- IP Address This page is the same as you can see in the Configure LAN side Settings page while running the Quick Setup . It allows you to set IP Address and Subnet Mask values for LAN interface. Primary IP Address: Type in the first IP address that you got from your ISP ...

Chapter 5:Connection Mode DHCP Server On: Check this item if DHCP service is needed on the LAN. The router will assign IP address, gateway address for each of your PCs. Start IP Address: Type in the start point IP address. End IP Address: Type in the end point IP address. Leased Time: Type in the du...

Chapter 5:Connection Mode Local Network – UPnP The UPnP is available only for Windows XP. If you are not user of Windows XP, this page does not have any meaning to you. This page allows you to enable the UPnP function through the web page for your router. Internet-Connections Setting To set WAN sett...

Internet - ADSL Settings Enable ADSL Port: Check this box to enable this function. It simply invokes the line mode that you choose here for the router. Select the support of line modes: There are several selections for your choosing. Select the one that you need. For Example, if you want to change o...

Chapter 5:Connection Mode Allow you to remove the selected static route settings. Adding a New One To add a static route, please choose Static Route - Add. Type the destination network address, subnet mask and gateway that you get from ISP and click Apply . Destination Network Address: The destinati...

… For a router with a direct connection to the Router’s local Router, the Gateway IP Address is the address of the Router’s local router. … For routers which must forward packets to another router before reaching the Router’s local router, the Gateway IP Address is the address of the intermediate ro...

Chapter 5:Connection Mode different interface. Otherwise, disable this function. Click Apply to invoke the settings set here.

Virtual Server-Port Forwarding The Router implements NAT to let your entire local network appear as a single machine to the Internet. The typical situation is that you have local servers for different services and you want to make them publicly accessible. With NAT applied, it will translate the int...

Chapter 5:Connection Mode IP Address seen by Internet Users Please note that, in the above picture, both Internet users are connecting to the same IP address, but using different protocols. To Internet users, all virtual servers on your LAN have the same IP Address. This IP Address is allocated by y...

From Internet Host IP Address: Select the initial place for port forwarding. If you choose SINGLE, a box will appear for you to fill in the IP address for the specific host. And, if you choose SUBNET, the boxes of IP and Subnet will appear for you to fill in the IP address and subnet mask for the sp...

Chapter 5:Connection Mode Or define by yourself by typing the words into the field of User defined. Click Apply to complete the setting. Virtual Server - DMZ Host Direct Mapping Zone (DMZ) uses a technology that makes Router forwarding all incoming packet to internal specific server. To close the fu...

Virtual Server - Dynamic DNS The Dynamic DNS (Dynamic Domain Nasme System) combines both functions of DNS and DHCP to map a dynamic IP into a fixed domain name. This page allows you to access into virtual servers with a domain name and password. Dynamic DNS ： Selects Enable to enable DDNS; select Di...

Chapter 5:Connection Mode Firewall The firewall is a software that interrupts the data between the Internet and your computer. It is the TCP/IP equivalent of a security gate at the entrance to your company. All data must pass through it, and the firewall (functions as a security guard) will allow on...

Chapter 5:Connection Mode A new IP filtering setting for Outbound traffic is created in the web page. To edit the setting, please click the pencil mark to get into the editing page. To delete the setting, click the trash mark to erase it. To set another IP filtering, click Add again. For adding a ne...

is the default setting. IP type of Service : The system provides some types of service for you to choose. The meaning of each type is the same as the denotation. The default one is No change. IPQoS To classify the upstream traffic by assigning the transmission priority of the data for different user...

Chapter 5:Connection Mode you want to invoke the QoS traffic rule. Destination Port: Type in the destination port for the traffic rule. The range is from 0 to 65535. Traffic Priority: There are three options – Low, Medium, and High that you can choose. It decides the order of each data transmitted t...

Group Name: Type in a name here as a group name. It must be unique. The word length must not be over the length of the field. Available Interfaces: The available interfaces (such as Ethernet, USB etc.) will be displayed in the left side box. When you choose it and click Add, it will be transferred i...

Chapter 5:Connection Mode Management Diagnostics To check the link status for the network and your computer, a diagnostic test can guide you to detect the network problem. The testing items are listed and accomplished one by one. If the previous one is failed, than the items below that failed one wi...

Admin Account This page allows you to type in the password for accessing into your DSL Router. For the Admin Account , the default setting for user password is admin . If you want to change the username and the password, please retype the new password in the Confirm field for confirmation. Then clic...

Chapter 5:Connection Mode Interntet Time The router’s clock must synchronize with global Internet’s time. The time you set in the screen will be adapted to system log. Update: Click this button to refresh the current time. Set Time by: The default setting is Manual. If you select Time Server, you do...

There are 8 types for log level and display level for your choose. The default is Debugging . The mode selection includes Local , Remote and Both . The default one is Local. If you choose Remote or Both , all the events will be sent to the specified UDP port of the specified log server. Viewing Syst...

Chapter 5:Connection Mode SNMP Setting The SNMP, the abbreviation of Simple Network Management Protocol, is used to refer to a collection of specifications for network management that include the protocol itself, the definition of data structures and associated concepts. A management station perform...

Chapter 5:Connection Mode UPnP for XP Universal plug and play (UPnP) is an architecture for pervasive peer to peer network connectivity of intelligent appliances and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks w...

7. Now, the NAT traversal function will be provided. The ADSL router will create a new virtual server automatically for mapping while the router detecting the computer running some Internet applications.

Chapter 5:Troubleshooting Chapter 5: Troubleshooting If the suggested solutions in this section do not resolve your issue, contact your system administrator or Internet service provider. Problems with LAN PCs on the LAN cannot get IP addresses from the ADSL Router. The chances are that the interface...

Request time out Then the DNS is not reachable. Check your DNS setting on the ADSL Router. Problems with Upgrading The following lists the error messages that you may see during upgrading and the action to take. … Error : All the ADSL LEDs light up and cannot light off as usual. Possible cause : Whe...

Chapter 6: Glossary Chapter 6: Glossary ARP ( Address Resolution Protocol ) ARP is a TCP/IP protocol for mapping an IP address to a physical machine address that is recognized in the local network, such as an Ethernet address. A host wishing to obtain a physical address broadcasts an ARP request ont...

configured and mapped to a private workstation address when accesses are made through the gateway to a public network. For example, the ADSL Router is assigned with the public IP address of 168.111.2.1. With NAT enabled, it creates a Virtual LAN. Each PC on the Virtual LAN is assigned with a private...

Chapter 7: Glossary the cells belonging to the same connection can be distinguished. A unique and separate VPI/VCI identifier is assigned in advance to indicate which type of cell is following, unassigned cells, physical layer OAM cells, metasignaling channel or a generic broadcast signaling channel...

Appendix A: Specifications Appendix A: Specifications Interface z One RJ-11 port for ADSL connection z Four RJ-45 ports for IEEE 802.3/802.3u 10/100 Base-T auto-sensing and auto-crossover Ethernet connection z One USB client port compliant to USB 1.1 z One hidden reset button for restoring to factor...

Appendix B: Server Setup for 802.1x Client Appendix B: Server Setup for 802.1x Client Getting Client Certificate 1. Please connect the client to a network that doesn’t require port authentictaion. 2. Open up Microsoft Explorer in Windows XP, and go to http://<yourserver>/certsrv. 3. Authentica...

Appendix C: WEEE – B2C Appendix C: WEEE – B2C All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal and separate collection of your old ap...