Siemens CD 3002 - Manuals

Purging of CD 3002 using air blower LDS 3000 Air blower 2 Flow rate vs length of the tube between the air blower and the sensor. Mechanical The air blower should be monted close to the sensor using bolts of the di-mension M10 on the following positions Position of mounting holes. 1 10 100 1000 Lengt...

LDS 3000 Air blower Purging of CD 3002 using air blower 3 The position of the air blower should either be horizontal with the mount-ing plate facing downwards or vertical with the air exit facing upwards. The figure below shows a good way of setting up the sensor with an air blower. Example set-up o...

Purging of CD 3002 using air blower LDS 3000 Air blower 4 1.3 Maintanance The major maintanance on the air blower is to change the input filter at a regular interval. The time between changes is totally dependent on the environment in which the air blower operates. The inlet under-pressure (directly...