Siemens CCIS1337-LP - Manuals

Safety 8 Siemens Building Technologies Fire Safety & Security Products 04.2006 2 Safety 2.1 Intended use The IP camera is used in indoor areas for showing live images via a network. It is not to be used outdoors nor in the protective housing. 2.2 Target Group Target Group Qualification Activity ...

Safety 9 Siemens Building Technologies Fire Safety & Security Products 04.2006 2.4 Meaning of the signal words The severity of a hazard is indicated by the following signal words. Ignoring these hazards may lead to the consequences indicated. Signal word Type of hazard WARNING Possible danger of...

Guidelines and standards 10 Siemens Building Technologies Fire Safety & Security Products 04.2006 3 Guidelines and standards 3.1 EU Directive The product meets the requirements of the EU Directive 89/336/EEC on electromagnetic compatibility The EU declaration of conformity is available from: Sie...

Technical specifications 11 Siemens Building Technologies Fire Safety & Security Products 04.2006 4 Technical specifications 4.1 Dimensions 4.2 Product specification CCD type 1/3” SONY Exview CCD DSP SONY HQ1 Scanning system 2:1 PAL interlace, vert. 50 Hz, hor. 15.625 Hz Active pixels 752 x 582 ...

Ordering information 13 Siemens Building Technologies Fire Safety & Security Products 04.2006 5 Ordering information Type Item No. Description Weight CCIS1337-LP 2GF1186-8AB 1/3" Super-high resolution day/night indoor IP camera; MJPEG, PAL, 540 lines; +12 V DC / +24 V AC, 50 Hz or PoE 0.50 k...

Package contents 14 Siemens Building Technologies Fire Safety & Security Products 04.2006 6 Package contents z Super-high resolution indoor 1/3" day/night IP camera CCIS1337-LP z C/CS mounting adapter z Quick installation guide z CD with operating manual z CD with software

Unit description 15 Siemens Building Technologies Fire Safety & Security Products 04.2006 7 Unit description 7.1 Camera parts 1 Back focus adjustment ring 2 Back focus lock screw 3 Tripod mounting 4 RS-485 output for control of pan/tilt mechanism 5 Connection for external control (alarm; color /...

Unit description 16 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.2 Connector socket definition IRIS pin assignment Video lens DC lens 1 +12 V 1 Damp- 2 NC 2 Damp+ 3 VIDEO 3 Drive + 4 GND 4 Drive - 1 2 3 4 Y/C output 1 GND 2 GND 3 Y (luminance, 1 V eff , 75 Ω ) 4 C (chr...

Unit description 17 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.3 System connections Fig. 1 System connections

Unit description 18 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.4 Accessing the unit’s home page There are two ways of accessing the unit’s home page: z Using Internet Explorer z Using the Web-Cam IP Manager 7.4.1 Accessing the unit’s home page with Microsoft Internet...

Unit description 20 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.5 Components of the unit home page Fig. 2 Unit home page 1 Language selection list box. Standard setting: English 2 Main menus 3 PTZ operating panel – see Section 7.5.1 PTZ control for more information. 4...

Unit description 21 Siemens Building Technologies Fire Safety & Security Products 04.2006 7.5.1 PTZ control The PTZ operating panel enables a pan/tilt drive with SCU protocol to be controlled. 1. Click PTZ under the live image. See Section 10.9.1 Displaying live video. Î The PTZ control appears....

Assembly and setup 22 Siemens Building Technologies Fire Safety & Security Products 04.2006 8 Assembly and setup 8.1 Setting up the IP camera 1. Mount the lens on the IP camera. 2. Connect a monitor to the video output ( 9 ) using a BNC cable. WARNING Danger of burns from the housing of the IP c...

Assembly and setup 23 Siemens Building Technologies Fire Safety & Security Products 04.2006 – The factory setting for the focal lenth (back focus) is for a CS-mount lens (as delivered). 8.1.1 Setting the focal length 1. Loosen the back focus lock screw ( 2 ). 2. Set the IP camera to the back foc...

Operational setup 24 Siemens Building Technologies Fire Safety & Security Products 04.2006 9 Operational setup 9.1 Establishing initial communication with the unit The factory settings for the IP address and subnet mask are 192.168.100.100 and 0.0.0.0 respectively. Communication between the devi...

Operational setup 25 Siemens Building Technologies Fire Safety & Security Products 04.2006 9.1.2 Mapping a network route Mapping an appropriate network route informs the computer that it can reach IP address 192.168.100.100 in its own network segment and does not need to use a router. Network ro...

Configuration 26 Siemens Building Technologies Fire Safety & Security Products 04.2006 10 Configuration 10.1 Establishing access to the device via Internet If it is necessary to be able to access your unit via the Internet, you must ensure that your IP address is Internet-enabled. An Internet Se...

Configuration 27 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.1.1 Example of access using a dynamic IP address Requirements: z Your device is part of a local network (LAN) and is connected to the Internet by a router, such as a TDSL router. z An ISP (Internet Service ...

Configuration 28 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.2 Configuring network settings 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. Select Network settings in the Configuration menu. Fig. 6 Network settings 3. Enter the desire...

Configuration 29 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.3 Changing the device IP address There are two ways of changing the device IP address: z Changing the device IP address via the device home page. z Changing the IP address using the Web-Cam IP Manager If th...

Configuration 30 Siemens Building Technologies Fire Safety & Security Products 04.2006 Manual IP address and subnet mask allocation 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. Select Network settings in the Configuration menu. Î The Network settings dialog op...

Configuration 31 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.3.2 Changing the IP address using the Web-Cam IP Manager NOTE You may only change the device IP address in the first 20 minutes after the unit has started. This assumes that: The Web-Cam IP Manager and all ...

Configuration 32 Siemens Building Technologies Fire Safety & Security Products 04.2006 5. Either manually enter the desired IP address, subnet mask and gateway (if required), or mark the check box if you want the DHCP server to determine these parameters. Î The settings will be adopted immediate...

Configuration 33 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.4 Configuring image parameters 10.4.1 Configuring general image parameters 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. Select Image parameters in the Configuration menu....

Configuration 34 Siemens Building Technologies Fire Safety & Security Products 04.2006 Name Enter a name for the video source here. This name will only be shown in the browser image. (See Section 10.5.3 Setting the synchronization.) Overlay text You can select the parameters that are to be overl...

Configuration 36 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5 Configuring camera settings 10.5.1 Configuring day/night settings 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera ...

Configuration 41 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.5 Entering and positioning the ID text 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the ID Text suboption. ...

Configuration 43 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.5.7 Service configuration 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. In the Configuration menu, select the menu option Camera and the Service suboption. Î The Service d...

Configuration 44 Siemens Building Technologies Fire Safety & Security Products 04.2006 Alarm function The following options are available: z OFF The “alarm in” function on the back side is deactivated. z ON The “alarm in” function on the back side is activated. After resetting the alarm, the ala...

Configuration 45 Siemens Building Technologies Fire Safety & Security Products 04.2006 Factory set user names z For configuration: – User name: config z For image access: – User name: image z For remote control: – User name: rc 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s h...

Configuration 46 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.8 Restarting the camera Certain settings changes (e.g. network settings) will only take effect after restarting the device. 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. 2. S...

Configuration 48 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.9 Live video 10.9.1 Displaying live video The data stream consists of individual JPEG-coded images, separated from each other by markers (boundaries). The software automatically selects the best possible li...

Configuration 49 Siemens Building Technologies Fire Safety & Security Products 04.2006 Displaying live video 1. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. Î The live video image is displayed using the default settings: 1 Text overlay. See Section 10.4.2 Configurin...

Configuration 50 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.9.2 Setting live video resolution Select the size of the live video display window in the Resolution submenu (as a function of the selected image quality). The following options are available: z Low QCIF, 1...

Configuration 51 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.10 Embedding live video images in a dedicated HTML page 10.10.1 Live video in Gecko-based browsers Prerequisite: You have installed a Gecko-based browser (Mozilla, Netscape 7.0+). This browser can be downlo...

Configuration 52 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.10.2 Live video with Internet Explorer Prerequisite: Microsoft Internet Explorer (5.5 or later) is installed. This browser can be downloaded from: http://microsoft.com/windows/ie/ In addition to Microsoft I...

Configuration 53 Siemens Building Technologies Fire Safety & Security Products 04.2006 10.10.3 Incorporating a still image in an HTML page Still pictures can be embedded in a dedicated HTML page as follows, for example: <IMG SRC="http://192.168.1.100/cgi-bin/livejpeg" BORDER=8> Use...

Maintenance 54 Siemens Building Technologies Fire Safety & Security Products 04.2006 11 Maintenance 11.1 Service mode The service mode allows the device IP address to be reset even if the IP address that is currently allocated to the device is not known. If, for example, the Automatic Network Co...