Siemens AFI5100 - Manuals

Input Point Module (AFI5100) 7 Siemens Building Technologies Fire Safety & Security Products 11.2007 7. Connect the active (+ve) and neutral (-ve) wires from the Power Supply Unit (PSU) to the POWER IN port. Ensure the polarity of the connection is made correctly. 8. Check all connections thorou...

Input Point Module (AFI5100) 8 Siemens Building Technologies Fire Safety & Security Products 11.2007 The following diagram displays the location of the ports on the AFI5100 : FOR OUT Nc C No OUT 1 Nc C No OUT 2 Nc C No OUT 3 Nc C No OUT 4 Nc C No DC POWER IN 0V V+ E LOCAL IN OUT IN+ IN- OUT+ OUT...

Input Point Module (AFI5100) 9 Siemens Building Technologies Fire Safety & Security Products 11.2007 1.7 Links and Jumpers The following table outlines the link settings for the AFI5100: Link Description Value LK1, LK2 Links 1 and 2 are used to configure whether Fire Over-ride (FOR) will oper-at...

Input Point Module (AFI5100) 10 Siemens Building Technologies Fire Safety & Security Products 11.2007 1.8 LEDs The following table describes the operation of the LEDs located on the AFI5100 : LED Brief Description POWER The POWER led is illuminated when power has been applied to the device. ACTI...