Siemens 30ISDN - Manuals

Contents VII profi30.IVZ 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Profiset 30isdn .............................................................................................................................. II Your guide to this manual ..................................................

Contents VIII profi30.IVZ 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings ................................................................... 27Programming the telephone settings ...................................................................

Putting the telephone into operation 1 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Putting the telephone into operation Symbols used in these operating instructions In some cases display messages are provided. Example: For information on display-driven operation of the Profiset...

Putting the telephone into operation 3 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 2: Connect the telephone Handset cord (coiled) Both ends of the handset cord have the same connector. Insert the connector at the long end of the handset cord into the socket labelled a on t...

Putting the telephone into operation 5 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 5: Setting the national variants This setting takes account of specific national features of the ISDN network: Step 6 (PBX operation only): Program the trunk code If you are operating your P...

Putting the telephone into operation 6 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 7: Try out the telephone You can now try out your Profiset 30isdn. Calling another party: c Lift the handset. T Enter the call number. The number is dialled. d Talk. Taking a call: Call sign...

Display-driven telephone operation 7 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Display-driven telephone operation Your Profiset 30isdn has a one-line display that contains several symbols. Symbols The following symbols indicate certain settings and modes of your Profiset 30is...

Display-driven telephone operation 8 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Connected mode In the course of a call, the call number of the called party (if it is transmitted or display is not suppressed) is shown. The display can alternate between charge (if tariff unit fa...

Outgoing and incoming calls 9 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Outgoing and incoming calls Calling users On-hook dialling You can enter (or change) the call number and then set up the connection when the handset is on-hook. There is also another way of on-hook dialli...

Outgoing and incoming calls 11 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Dialling call numbers using the Speed dialling keys (automatic dialling) 10 frequently used call numbers can be dialled quickly and easily using Speed dialling keys. Speed dialling is also pos- sible wit...

Outgoing and incoming calls 13 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Call waiting You must apply to your local network operator for the “Call waiting“ feature. While you are conducting a call, a second incoming call is signalled acoustically and visually. You can then acc...

Outgoing and incoming calls 14 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Call list If a caller does not reach you or if a caller or a queued caller is rejected, the relevant call number (if it is known) is stored in the call list. Up to 12 different call numbers can be stored...

Outgoing and incoming calls 15 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Deleting the call list Deleting the call list is possible via the “Clearing memo- ry“ function ( ➔ page 39). Callback You must apply to your local network operator for this fea- ture. Inquire about the r...

Outgoing and incoming calls 16 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Accepting a callback You have activated a callback with a busy party. Clearing a callback Ending a call – disconnecting When you actively close the connection, the telephone re- turns to the idle mode an...

Convenient and secure telephone communication 17 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Convenient and secure telephone communication Activating/deactivating open listening If those present in your room wish to listen to your con- versation, you can switch on the loudspeak...

Convenient and secure telephone communication 19 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Locking your telephone You can lock your Profiset 30isdn against possible unau- thorized use: ● Total lock , only allows you to dial a preset direct station selection number (Programmin...

Convenient and secure telephone communication 21 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Overview: DTMF / keypad signalling The following table illustrates which signalling method is possible in which mode of your telephone: Modes of the telephone Signalling method Keypad s...

Calls involving two or more parties 22 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Calls involving two or more parties Calling the second party (consultation) You can consult with another party in the course of a call. The first call is put on hold during the consultation call....

Calls involving two or more parties 23 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Disconnecting one party You can disconnect one party in the course of a consulta- tion call. Afterwards,you are automatically connected to the remaining party. Three-party conference In a confere...

Calls involving two or more parties 24 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Ending a conference You can disconnect one party or toggle between the two parties. To terminate the conference completely, replace the handset. Ending a conference by disconnecting a party Endin...

Programming keys on the telephone 25 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Programming keys on the telephone Programming the destination dialling keys Each Destination dialling key (at the top, left to the label- ling card ➔ page III) can be programmed with a frequently u...

Quick reference for available telephone settings 27 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings Description Procedure Telephone settings page Call number for call forwarding uncondit. S02 one call number 34 Call processing type S...

Programming the telephone settings 28 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Programming the telephone settings Nearly all settings of your telephone (except parking a call, input of the connection code and checking the settings of the telephone) can only be programmed wit...

Programming the telephone settings 29 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Ringer volume You can set the volume of the call signal to four levels (1...4: 1=very low, 4=very loud). The volume is preset to level 2. If the volume is set to level 0, the call signal is de- ac...

Programming the telephone settings 30 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Handset and loudspeaker volume You can set the volume of the handset and loudspeaker to four levels (1...4: 1=minimum volume, 4=maximum vol- ume). The volume is preset to level 2. You can set the ...

Important information for installation and operation 41 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Important information for installation and operation Maintenance To clean the telephone, use a damp or antistatic cloth. Never use any abrasive cleaning agents. Removing and inse...

Important information for installation and operation 44 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Warranty Siemens AG offers a six months warranty for this device from the date of purchase from the dealer. Always retain receipts as proof of date of purchase. Over this warrant...

Important information for installation and operation 45 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Procedure in the case of malfunctions The cause of an operating error need not necessarily lie with the device. You may save time and money by rectify- ing simple faults yourself...

ISDN glossary 46 glossar.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 ISDN glossary The ISDN glossary should help you understand the many new terms and abbreviations relating to ISDN. AOC-D ISDN service. Abbreviation for A dvice o f C harge D uring Call and means that the charge of th...

Quick reference guide 49 kurzba.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference guide Number redial: c è W oder W ... W è d Programming the Destination dialling keys: S è 10 è z è T (call number) è S Dialling with the Destination dialling keys: c è z or z è d Programming ...

Index 52 profi30.SIX 27.11.1998 Profiset 30isdn engl.: A30853-X300-B107-1-7619 S Safety .............................................................. V Setting the national variants ............................ 5 Siemens Service ........................................... 44 Signal tones .............