Siemens 2602 - Manuals

2- 1 C HAPTER 2 I NSTALLING THE S PEED S TREAM 2602 Before installing the SpeedStream 2602 DSL/Cable Router, verify that you have all the items listed under “Package Contents,” and that you have all the necessary cabling. If any of the items are missing or damaged, contact Technical Support (see App...

2- 2 duplex and only supports MDI-X pin signals. Consequently, you will have to use either a straight-through or crossover cable, depending on the port type used with the modem. Figure 2-1. SpeedStream 2602 DSL/Cable Router Table 2-1. SpeedStream 2602 Unit Components Item Description Reset Button Re...

2- 3 System Requirements You must have access to a network that meets the following minimum requirements: • Internet access from your local telephone company or Internet Service Provider (ISP) using an xDSL or cable modem. • A computer using a fixed IP address or dynamic IP address assignment via DH...

2- 4 adapter or to another network device. Figure 2-2. LAN Connections Caution: Do not plug a phone jack connector into any RJ-45 port. This may damage the SpeedStream 2602. Instead, use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. The two LAN ports on the SpeedStrea...

2- 5 Figure 2-3. WAN Connection Use unshielded or shielded twisted-pair Ethernet cable with RJ-45 plugs to connect the broadband modem directly to the WAN port on the SpeedStream 2602. Use either straight-through or crossover cable depending on the port type provided by the modem (see Appendix B, “C...

3- 1 C HAPTER 3 C ONFIGURING THE S PEED S TREAM 2602 Before you can configure the SpeedStream 2602 DSL/Cable Router, the TCP/IP protocol must be installed on all computers on your network. If you need to install TCP/IP, refer to Chapter 4, “Installing and Configuring TCP/IP.” After TCP/IP is install...

3- 2 • Help – View descriptions of menu items, troubleshooting tips, glossary of terms, and contact information for SpeedStream support, driver updates, Web site, and FTP site. Menu Selections The following table briefly describes the selections available from the management interface: Table 3-1. Ma...

3- 3 browsers or later browser versions may vary somewhat): 1. From the browser menu bar, click Tools . 2. On the Tools menu, click Internet Options . 3. On the Internet Options menu, click the General tab. 4. In the General box, select Temporary Internet Files . 5. In the Settings , box, select Eve...

3- 4 Simple Setup Procedures The management interface will guide you through sequence of steps required to configure the SpeedStream 2602 for use with an ISDN TA or 56k, cable or DSL modem. As you click Enter on each screen to accept the settings you enter, the next screen in sequence will display. ...

3- 5 To begin configuring your WAN connection: 1. From the main menu, click Simple Setup ; then click WAN . 2. On the Simple Setup | WAN screen, click to select the correct connection type: Dynamic IP Address (DHCP), Static IP Address (Fixed), or PPP over Ethernet (PPPoE). 3. Click More Configuratio...

3- 6 Advanced Setup Procedures After completing the Simple Setup menu options, you will next move to the Advanced Setup options. You may also go directly to any of these screens by clicking that option on the main menu. The SpeedStream 2602 DSL/Cable Router supports advanced functions including hack...

3- 7 Enable Firewall Protection From the Advanced Setup | Firewall screen, you can enable the SpeedStream 2602 firewall to block common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN fl...

3- 8 4. Tto enter that information in the Public Port boxes on the designated line, click Copy to . Network Address Translation (NAT) Network Address Translation, or NAT, is automatically enabled when you enable multi-user Internet access or enable the Virtual Server function. NAT provides multiple ...

3- 9 information. 4. Click Copy to to enter that information in the Public Port boxes on the designated line. If an application still cannot function correctly after enabling multiple ports via the Special Application screen, you may need to use the Virtual DMZ Host option to open the client compute...

3- 10 Caution: If you specify an IP address of 0.0.0.0, any host can manage the SpeedStream 2602. • IP Address of Virtual DMZ Host – You may encounter a client PC that cannot properly run Internet applications from behind the NAT firewall or after configuring the Special Applications function. This ...

4- 1 C HAPTER 4 I NSTALLING AND C ONFIGURING TCP/IP To access the Internet through the SpeedStream 2602 DSL/Cable Router, you must configure it and your network computers with same IP subnet. Manually configure the IP address for client computers or obtain it automatically from the SpeedStream 2602’...

4- 2 Figure 4-2. Select Network Protocol 6. The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure, and restart your computer to enable the TCP/IP protocol. Configure TCP/IP for the SpeedStream 2602 When TCP/IP is installed on your computer, follow these...

4- 3 4. Click OK and reboot your system to implement the changes. Figure 4-3. TCP/IP Properties Sheets Manual IP Configuration 1. On the IP Address tab, select Specify an IP address . Select the IP address based on the default network 192.168.254.X , where X is from 1 to 253. Enter 255.255.255.0 for...

5- 1 C HAPTER 5 C ONFIGURING P RINTER S ERVICES The SpeedStream 2602 printer server supports Windows 95/98/NT/2000/ME and Unix platforms. To configure print services for devices attached to the SpeedStream 2602: 1. Install the Port Monitor program from the SpeedStream 2602 CD-ROM. 2. Configure the S...

A- 1 Appendix A T ROUBLESHOOTING This section describes common problems you may encounter and their possible solutions. Use the panel indicators to monitor and identify problems with the SpeedStream 2602. If you cannot resolve any connection problems after checking the indicators, refer to the follo...

A- 2 Technical Support Before contacting Technical Support, please refer to the previous Troubleshooting table. If you are still unable to resolve the problem, be prepared to provide the following information: • Model number (SpeedStream 2602) • Software version • Date of purchase or installation • ...

B- 1 Appendix B C ABLES Ethernet Cable Cable Types and Specifications Table B-1. Cable Types and Specifications Twisted-pair Cable Caution: DO NOT plug a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards. For 10BASE-T/100BASE...

B- 2 RJ-45 Pin Numbering Table B-2. RJ-45 Pin Numbering RJ-45 Pin Assignments All LAN ports on the SpeedStream 2602 support automatic MDI/MDI-X configuration. This means that the pin signals in use will depend on whether the LAN port is operating in MDI or MDI-X mode. The WAN port is configured only...

C- 1 A PPENDIX C Specifications WAN Interface 10BASE-T, 1 RJ-45 port LAN Interface 10BASE-T/100Base-TX(2) RJ-45 ports Management Web management interface Advanced Features Dynamic IP Address Configuration – DHCP, DNSFirewall – Client privileges, hacker prevention and logging, NATVirtual Private Netw...