Shop Fox W1802 - Manuals - manualsarea.com

Page 3 - Safety Instructions for Pneumatic Tools; SAFETY; For Your Own Safety Read Instruction Manual; NOTICE

Model W1802 2 QT. Professional Spray Gun -1- Safety Instructions for Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AR...

Page 5 - Additional Safety Instructions for Spray Guns

Model W1802 2 QT. Professional Spray Gun -3- 1. READ THIS MANUAL. This manual contains proper operating instructions for this spray gun. 2. READ MATERIAL LABELS and MATERIAL SAFETY DATA SHEETS (MSDS). Read and know all the instructions on the packaging label and the MSDS before opening the package. ...

Page 6 - INTRODUCTION; Woodstock Technical

Model W1802 2 QT. Professional Spray Gun -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serio...

Page 7 - SETUP; Inventory

Model W1802 2 QT. Professional Spray Gun -5- SETUP Inventory This tool has been carefully packaged for safe transportation. If you notice the spray gun has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking The following is a description of the main c...

Page 8 - Assembly

Model W1802 2 QT. Professional Spray Gun -6- Assembly 2. Attach the 3 ⁄ 8 " fluid hose to the 3 ⁄ 8 " outlet on the cap (see Figure 3 ). Figure 2 . Installing hook/handle. Figure 3 . Installing fluid hose. 1. Attach the hook /handle on the cap with 19mm and 14mm wrenches (see Figure 2 ). Fig...

Page 9 - Controls

Model W1802 2 QT. Professional Spray Gun -7- 6. Attach the compressed air line to the air inlet, as shown in Figure 7. For easier operation and maintenance, install a 1 / 4 " NPT quick disconnect set- up on the air line (not included). Note: For the best results, use a fil- ter that will extract...

Page 10 - OPERATIONS; Spraying

Model W1802 2 QT. Professional Spray Gun -8- OPERATIONS EXPLOSION HAZARD! DO NOT smoke or have any source of flame or spark near spraying. Vapors will explode if ignited. RESPIRATORY HAZARD! Always use respirator rated for organic vapor and solvent use when using spray equip-ment. Failure to protect...

Page 12 - Atomizing Cap and Fan

Model W1802 2 QT. Professional Spray Gun -10- Atomizing Cap and Fan Adjustments The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogge...

Page 13 - CLEANING & LUBRICATION

Model W1802 2 QT. Professional Spray Gun -11- CLEANING & LUBRICATION Cleaning Proper cleaning is the best way to ensure trouble free performance from your spray system. If your system is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper clean-ing will not ...

Page 15 - Lubrication

Model W1802 2 QT. Professional Spray Gun -13- Lubrication Lubricate the following areas in Figures 18-20 with a non-silicon spray gun lubricant after each cleaning. A. Atomizing Cap Threads B. Air Valve Packing C. Trigger Pin D. Fluid Control Knob E. Pattern Control Knob F. Pressure Control Knob All...

Page 16 - Troubleshooting; Symptom

Model W1802 2 QT. Professional Spray Gun -14- Troubleshooting Symptom Possible Cause Possible Solution Fluttering or Spitting spray. 1. Dry or worn fluid tip seat permits air to seep into fluid passage. 2. Material level too low.3. Fluid tip or strainer obstruct- ed. 4. Dry needle packing. 1. Tighte...

Page 22 - WARRANTY AND RETURNS

Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or ac...

Page 23 - Warranty Registration

CUT ALONG DOTTED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ___________________________ Zip ________________________Phone # ...