Shop Fox W1774 - Manual - manualsarea.com

Page 3 - SAFETY; Safety Instructions for Pneumatic Tools; NOTICE

Model W1774 18 Gauge Brad Nailer -1- SAFETY Safety Instructions for Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK ARE...

Page 5 - Additional Safety for Nailers/Staplers

Model W1774 18 Gauge Brad Nailer -3- Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious pers...

Page 6 - INTRODUCTION; Woodstock Technical

Model W1774 18 Gauge Brad Nailer -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious perso...

Page 7 - Compressed Air System

Model W1774 18 Gauge Brad Nailer -5- The Model W1774 is designed to be operated at 60-100 PSI using clean, dry, regulated, compressed air. Do not exceed the 120 PSI maximum operating pressure for your model. Before using your nailer, regulate the air pressure to find the optimum setting within the s...

Page 8 - SETUP; Inventory

Model W1774 18 Gauge Brad Nailer -6- SETUP Inventory This brad nailer has been carefully packaged for safe transportation. If you notice the tool has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking The following is a description of the main compone...

Page 9 - Safety Nose Mechanism

Model W1774 18 Gauge Brad Nailer -7- Safety Nose A safety mechanism on the nose of the nailer protects against accidental firing. When the trigger is pressed, the nailer will not fire until the safety nose mechanism is depressed. Before you use your nailer for the first time, check the safety nose m...

Page 10 - OPERATIONS; Loading; Operating

Model W1774 18 Gauge Brad Nailer -8- OPERATIONS Loading When replacing nails in your Model W1774, follow these guidelines: Gauge: ........................................ 18Length: .................................. 5 ⁄ 8 "–2" Capacity: ................................... 100 To load your na...

Page 12 - Clearing Jammed Nails

Model W1774 18 Gauge Brad Nailer -10- A jammed nail must be cleared before using the nailer again. To clear a jammed nail from the dis-charge area, do these steps: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Depress the magazine latch and pull back the magazine cover until it stops. 3. Remove the n...

Page 14 - CLEANING & LUBRICATION; Cleaning

Model W1774 18 Gauge Brad Nailer -12- CLEANING & LUBRICATION Cleaning Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nailer; this may re...

Page 17 - Troubleshooting; Symptom

Model W1774 18 Gauge Brad Nailer -15- Troubleshooting Symptom Possible Cause Possible Solution Air leaking at trigger valve area. 1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked. Air leaking between housing and hose 1. Loose...

Page 19 - Warranty Registration

CUT ALONG DOTTED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ___________________________ Zip ________________________Phone # ...

Shop Fox W1774 - Manual

Table of Contents:

Summary

Other Shop Fox Models