Shop Fox W1785 - Manuals - manualsarea.com

Page 3 - Safety Instructions for Pneumatic Tools; SAFETY; For Your Own Safety Read Instruction Manual; NOTICE

Model W1785 Palm Nailer -1- Safety Instructions for Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN. Clutter...

Page 5 - Additional Safety for Nailers

Model W1785 Palm Nailer -3- 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressurized oxygen or other combustible gases as a ...

Page 6 - INTRODUCTION; Woodstock Technical

Model W1785 Palm Nailer -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injur...

Page 7 - Compressed Air System

Model W1785 Palm Nailer -5- The Model W1785 is designed to be operated at 70-100 PSI using clean, dry, regulated, compressed air. Do not exceed the 120 PSI maximum pressure for your model. Before using your nailer, regulate the air pressure to find the optimum setting within the specified operating ...

Page 8 - SETUP; Inventory

Model W1785 Palm Nailer -6- SETUP Inventory This tool has been carefully packaged for safe transportation. If you notice the tool has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking The following is a description of the main components shipped with...

Page 9 - OPERATIONS; Operating

Model W1785 Palm Nailer -7- OPERATIONS If you have not read the safety instructions in this manual, do not operate the nailer. Before you operate your nailer, place five to six drops of the included oil into the quick connect fitting where the nailer connects to the air supply. To operate your naile...

Page 11 - CLEANING & LUBRICATION; Cleaning

Model W1785 Palm Nailer -9- CLEANING & LUBRICATION Cleaning Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nailer; this may result in le...

Page 12 - PARTS BREAKDOWN & PARTS LIST

Model W1785 Palm Nailer -10- PARTS BREAKDOWN & PARTS LIST �� Parts Breakdown REF PART � # DESCRIPTION REF PART � # DESCRIPTION 101 XPSB15M CAP � SCREW � M5-.8 � X � 20 115 X178511...

Page 13 - TROUBLESHOOTING; Symptom

Model W1785 Palm Nailer -11- TROUBLESHOOTING Symptom Possible Cause Possible Solution Air leaking at trigger valve area. 1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked. Air leaking between housing and hose 1. Loose screws i...

Page 14 - WARRANTY AND RETURNS

Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or ac...

Page 15 - Warranty Registration

CUT ALONG DOTTED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ___________________________ Zip ________________________Phone # ...