Shop Fox W1784 - Manuals - manualsarea.com

Page 3 - Safety Instructions for Pneumatic Tools; SAFETY; For Your Own Safety Read Instruction Manual; NOTICE

Model W1784 (Mfg. Since 2/07) -1- Safety Instructions for Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN. C...

Page 5 - Additional Safety for Staplers

Model W1784 (Mfg. Since 2/07) -3- 1. HAND INJURIES: Do not place your hands near the staple point of entry. A staple can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the stapler to pressurized oxygen or other combustible ...

Page 6 - INTRODUCTION; Woodstock Technical

Model W1784 (Mfg. Since 2/07) -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal...

Page 7 - Compressed Air System

Model W1784 (Mfg. Since 2/07) -5- The Model W1784 is designed to be operated at 70-100 PSI using clean, dry, regulated, compressed air. Do not exceed the 120 PSI maximum pressure for your model. Before using your stapler, regulate the air pressure to find the optimum setting within the specified ope...

Page 8 - SETUP; Inventory

Model W1784 (Mfg. Since 2/07) -6- SETUP Inventory This tool has been carefully packaged for safe transportation. If you notice the tool has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking The following is a description of the main components shippe...

Page 9 - OPERATIONS; Loading; Operating

Model W1784 (Mfg. Since 2/07) -7- OPERATIONS Loading When replacing staples in your Model W1784, follow these guidelines: Staple Gauge ............................. 15.5Staple Length ............................. 1"–2"Capacity: ..................................... 60 To load your stapler, d...

Page 10 - Clearing Jammed

Model W1784 (Mfg. Since 2/07) -8- DO NOT place your hands near the staple point of entry. A staple can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. NOTICE DO NOT use the stapler to position the flooring strip. Doing so will damage the stapler and possibly t...

Page 13 - CLEANING & LUBRICATION; Cleaning

Model W1784 (Mfg. Since 2/07) -11- CLEANING & LUBRICATION Cleaning Use a good solvent to clean the nose assembly of the stapler. Always be sure that the stapler is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the stapler; this may re...

Page 14 - PARTS BREAKDOWN

Model W1784 (Mfg. Since 2/07) -12- PARTS BREAKDOWN 5 4 3 1 65 6 7 8 9 10 11 12 13 14 15 33 32 31 30 29 28 27 26 25 24 23 22 35 37 38 39 37 38 19 18 17 16 50 48 46 47 49 43 42 41 51 52 53 54 55 56 57 44 40 34 58 59 60 61 62 63 64 66 67 68 69 70 71 72 45

Page 15 - PARTS LIST

Model W1784 (Mfg. Since 2/07) -13- PARTS LIST REF PART # DESCRIPTION REF PART # DESCRIPTION 1 X1784001 CYLINDER 39 X1784039 L-BOLT 3 X1784003 BUMPER 40 X1784040 CYLINDER HEAD SEAT 4 XPORP050 O-RING 49.7 X 3.5 P50 41 X1784041 STAPLE HEAD COVER 5 X1784005 DRIVER 42 X1784042 STAPLE HEAD 6 XPRP07M ROLL ...

Page 16 - Troubleshooting; Symptom

Model W1784 (Mfg. Since 2/07) -14- Troubleshooting Symptom Possible Cause Possible Solution Air leaking at whack cap area. 1. O-rings in plunger/cylinder housing are damaged. 1. O-rings must be replaced & operation checked. Air leaking between housing and hose 1. Loose screws in housing. 2. Dama...

Page 17 - Warranty Registration

CUT ALONG DOT TED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ___________________________ Zip ________________________Phone #...

Page 19 - WARRANTY AND RETURNS

Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or ac...