Shop Fox W1783 - Manuals - manualsarea.com

Page 3 - Safety Instructions for Pneumatic Tools; SAFETY; For Your Own Safety Read Instruction Manual; NOTICE

Model W1783 (Mfg. Since 2/07) -1- Safety Instructions for Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN. C...

Page 5 - Additional Safety for Nailers/Staplers

Model W1783 (Mfg. Since 2/07) -3- 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressurized oxygen or other combustible gases...

Page 6 - INTRODUCTION; Woodstock Technical

Model W1783 (Mfg. Since 2/07) -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal...

Page 7 - Compressed Air System

Model W1783 (Mfg. Since 2/07) -5- The Model W1783 is designed to be operated at 70-110 PSI using clean, dry, regulated, compressed air. Do not exceed the 120 PSI maximum pressure for your model. Before using your nailer, regulate the air pressure to find the optimum setting within the specified oper...

Page 8 - SETUP; Inventory

Model W1783 (Mfg. Since 2/07) -6- SETUP Inventory This tool has been carefully packaged for safe transportation. If you notice the tool has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Unpacking The following is a description of the main components shippe...

Page 9 - OPERATIONS; Loading; Operating

Model W1783 (Mfg. Since 2/07) -7- OPERATIONS Loading When replacing nails in your Model W1783, follow these guidelines: Nails .................... L-Shaped Cleat NailsLength: .................................... 1"–2"Capacity: ................................... 100 Note: Use 1 1 ⁄ 2 " n...

Page 10 - Clearing Jammed Nails

Model W1783 (Mfg. Since 2/07) -8- DO NOT place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. NOTICE DO NOT use the nailer to position the flooring strip. Doing so will damage the nailer and possibly the flo...

Page 13 - CLEANING & LUBRICATION; Cleaning

Model W1783 (Mfg. Since 2/07) -11- CLEANING & LUBRICATION Cleaning Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nailer; this may resul...

Page 14 - PARTS BREAKDOWN

Model W1783 (Mfg. Since 2/07) -12- PARTS BREAKDOWN 63 5 4 3 1 6 7 8 9 10 11 12 13 14 15 33 32 31 30 28 27 29 26 25 35 37 38 64 19 18 17 16 43 41 42 40 44 37 38 39 45 46 47 48 49 26 50 51 44 53 52 54 55 34 56 59 60 61 58 57 62 66 67 65 68 69 22 23 24 70

Page 15 - PARTS LIST

Model W1783 (Mfg. Since 2/07) -13- PARTS LIST REF PART # DESCRIPTION REF PART # DESCRIPTION 1 X1783001 CYLINDER 38 XPW01M FLAT WASHER 8MM 3 X1783003 BUMPER 39 X1783039 L-BOLT 4 XPORP050 O-RING 49.7 X 3.5 P50 40 X1783040 STOPPER 5 X1783005 DRIVER 41 XPS38M PHLP HD SCR M4-.7 X 10 6 XPRP07M ROLL PIN 6 ...

Page 16 - Troubleshooting; Symptom

Model W1783 (Mfg. Since 2/07) -14- Troubleshooting Symptom Possible Cause Possible Solution Air leaking at whack cap area. 1. O-rings in plunger/cylinder housing are damaged. 1. O-rings must be replaced & operation checked. Air leaking between housing and hose 1. Loose screws in housing. 2. Dama...

Page 17 - Warranty Registration

CUT ALONG DOT TED LINE Name ___________________________________________________________________________________Street __________________________________________________________________________________City _________________________ State ___________________________ Zip ________________________Phone #...

Page 19 - WARRANTY AND RETURNS

Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or ac...