Shindaiwa 41RS Broadcast - Manuals

ASSEMBLY Remove the spreader and com- 1. ponents from the carton. Turn spreader upside down. Insert (2) 1/4-20 x 1 1/2” hex bolts through the flattened end of handle brace, frame and leg as shown. Install hex nuts but do not tighten. Repeat on opposite side. Make sure braces are parallel and tighten...

OPERATION Check the product package for the rate 1. setting, and recommended swath width. Turn the spreader off by pushing the control knob in. Rotate the rate cam to the proper setting. Always fill the spreader on the driveway 2. or sidewalk-not on the lawn. Make sure spreader is in the “OFF” posit...

HOW TO DETERMINE SPREADER SETTINGS AND SPREAD WIDTH EFFECTIVE PATTERN WIDTH APPLICATION RATE Two major factors should be considered when determining correct spreader settings of any product: The product application rate, or the amount of material applied per 1,000 square feet. 1. The effective patte...