Shindaiwa 4 Cycle Diesel Engine - Manuals

Page 2 - Introduction; Danger; Caution

1 Introduction Thank you for purchasing Shindaiwa Sound Proof Diesel Engine Generator/Welder. z This user manual was created to ensure the safe operation of this equipment. Therefore, the manufacturer of this equipment strongly recommends that the user follow the instructions herein, to avoid unnece...

Page 7 - Caution : Damage to the equipment or other properties

6 3. Use z Arc Welding z Power Source for Electric Tools and Home Appliances z Power Source for Lighting Caution : Damage to the equipment or other properties z The equipment is designed for the above purposes only. Do not use it for the other purpose. When it will be used for the equipment with the...

Page 8 - welding

7 5. Equipment 5-1 ECO Welding (DGW311DM only) The equipment is incorporated in ECO welding features that are aimed at performing the lower noise, the lower fuel consumption and the lower gas emission than conventional models. When you turn the selector switch to ECO, you will be able to weld with M...

Page 10 - Danger : Electric Shock

9 level. Check the battery fluid level periodically. (Refer to No. 6-5 Checking Battery) 5-2.3 Coolant/Water Temperature Monitor Lamp Danger : Injuries z Close all doors and place locks during operating this equipment, to avoid injuries by uninten- tionally touching cooling fan and fan belt. Danger ...

Page 18 - Welding Output Terminal A

17 Size of Cable (Unit: mm 2 ) Welding Cur-rent Return Length 20m 30m 40m 60m 80m 100m 300A 30 38 50 80 100 125 250A 22 30 38 60 80 100 200A 22 30 30 50 60 80 150A 22 22 22 38 50 60 100A 22 22 22 30 30 38 8-2 Polarity There are two kinds of welding output terminals, 『+』 and 『‑』. Select the polarit...

Page 20 - Generator Operation

19 welding output selector switch ( 『 ECO 』 , 『 Single 』 and 『 Dual 』). Welding Current Adjustable Range Selector Position Current Adjustable Range Welding Rod ECO 30-160A φ 2.0-4.0 Single Single Use 85-310A φ 2.6-6.0 Dual Dual Use 45-160A φ 2.0-4.0 After the engine is started (...

Page 21 - the receptacles and the terminal set is 6kVA.

20 9-1.1.2 1-Phase 220V Output – Terminals (using the terminals only) 1-Phase 220V Output is available, using the 3-phase output terminals. Maximum output available for the one set of the terminals is 6kVA but the total output for the 3 sets is 8kVA, which please note. 9-1.1.3 1-Phase 110V Output – ...

Page 22 - -2 Output Limitation; Receptacle

21 9-1.2.3 1-Phase Output – Terminals 1-Phase Output is available, using the 3-Phase output terminals and the other terminal (O). Maximum output available for the one set of terminals is 3kVA but the total output for 3 sets is 8kVA, which please note. <Caution> z When using 1-Phase output, con...

Page 23 - Terminal

22 DGW311L-(W)380A, DGW311L-(W)400A, DGW311L-(W)415A : Applicable Load (For reference purpose only) (50Hz) Capacity (kW) 1-Phase (O & U, V, W) 1-Phase (U, V, W) 3-Phase (U, V, W) Loads Terminal 1 set Terminal 3 sets Total Terminal 1 set Terminal 3 sets Total Terminal Electric Bulb, Heater, etc. ...

Page 31 - Engine Wiring Diagram; DM

Page 32 - Generator Wiring Diagram

Page 37 - Asaminami−Ku,Hiroshima,

Head Office : ６−２−１１，Ｏｚｕｋａ−Ｎｉｓｈｉ，Ａｓａｍｉｎａｍｉ−Ｋｕ，Ｈｉｒｏｓｈｉｍａ，７３１−３１６７，Ｊａｐａｎ Telephone : 81-82-849-2220 FAX : 81-82-849-2481 71902‑94012