Schweigen UM1170-12BSPPAK - Manuals

Page 5 2. Your Safety This guide is for the installation of the Isodrive motor system after the rangehood has been mounted on the wall or roof. (Refer to rangehood installation manual on how to install the rangehood). NOTE: All PVC pipe and SteelFlex ™ ducting measurements are referring to inside me...

Page 7 3. Description Isodrive Motor Included in the box: 1. Isodrive 1600 motor (405W x 220H mm approx.) Approx. 3 metre, 10amp cable and standard plug 2. Fire resistant 150mm (160mm outside dimension) PVC riser pipe 3. SteelFlex ™ safety ducting. Approx. 6 metres, 200mm (210mm outside dimension) d...

Page 8 4. Installation Roof Installation Recommended duct length: 1600 motor — 5 to 6 metres. Mount 150mm (ISD) rigid PVC pipe securely to beams, trusses or other appropriate structures: refer figure 1. The pipe should be mounted vertically with the roof penetration being sealed using a Dektite or o...

Page 10 Figure 2: Flat roof installation Flat Roof Installation Flat roof mounting using optional mounting flange*. PED Engage locking screws in holes Seal 3 holes in stepped surface Seal between mounting flange and cover Up-stand and capping Power supply cord passing through pipe slots Ring clamp N...

Page 11 Wall Installation This type of installation is similar to roof mounting, ensuring that the pipe extends at least 50mm past the wall surface refer figure 3. If the pipe length is shortened, reproduce the power cord exit slot on the inside of the wall. IMPORTANT FOR 1600 MOTOR: Weather shield ...

Page 13 Through Wall Installation with Backdraft Shutter Due to the weight and to create stability for the Isodrive 1600 motor, it is require to use a hanging bracket. Warranty will be void if a hanging bracket is not used. *Optional parts are available from Schweigen, please contact 1300 881 693. S...

Page 14 Fan Unit Shutter Assembly for Isodrive 1600 1. Assemble by fitting shutter assembly into fan inlet shroud moulding, ensuring that attaching screws align with holes. Alignment can be checked visually by folding in shutter flaps. 2. Fully tighten both screws and re-check fitment into holes. 3....

Page 15 Twin Motor Installation (suitable for rangehoods with two 200mm outlets) Where two motors are to be used, follow the method below. Each motor should have a separate flue pipe. Refer figure 7. The two motors can be wired by an electrician. Connect to main power Connect to motor Computer box C...

Page 17 Figure 9: Roof mount option Single Motor Installation Twin 200mm Outlet (suitable for rangehoods with two 200mm outlets and one 1600 Isodrive motor) This is for use where one motor is to be used and there are two 200mm outlets, refer figure 9. Try to keep length of SteelFlex ™ ducting as eve...

Page 18 5. Measurements Measurements for Isodrive 1600 (Not to Scale) 205mm 80mm 35mm 50mm 400mm 300mm 515mm 160mm 320mm 190mm 110mm Dektite Motor weight: 6kg net. Figure 10: Measurements for Isodrive 1600

Page 20 6. SteelFlex ™ Safety Duct Assembling SteelFlex ™ Safety Duct SteelFlex ™ safety duct must be secured to either the bell-mouth adapter ring or a 200mm mounting pipe. 1. Slide the steel ring clamp over the end of the duct then insert the bell-mouth adapter ring into the duct end Parts require...

Page 21 6. SteelFlex ™ Safety Duct Shallow Roof Space In shallow roof spaces, do not crush or kink SteelFlex ™ ducting, as it will reduce air flow severely. 90 degree curve made of PVC or galvanise can be used as a substitute for the bend. Figure 13: Shallow roof space Figure 14: SteelFlex ™ duct re...

Page 22 6. SteelFlex ™ Safety Duct Securing SteelFlex ™ Safety Duct SteelFlex ™ safety duct must be installed with supports at maximum intervals of 1.5 metres. SteelFlex ™ safety ductwork can be supported by using good quality gaffer or aluminium foil tape. Provided that it does not restrict the int...

Page 23 7. Parts List Parts List for Isodrive 1600 9 3 1 5 4 6 7 3 18 19 20 21 22 23 17 16 11 12 13 14 15 24 25 2 10 23a OR For wall installation with no back drought system or flat roof installation.

Page 26 9. Warranty / Disclaimer Warranty (See warranty for more information) Isodrive motor has a 10-Year replacement product warranty.* The consumer is responsible for any charges associated with removal of the faulty unit and installation of the new unit. The customer is also responsible for any ...