Schweigen UM-PA9STPAK - Manuals

Page 2 - Welcome

Page 2 Welcome Thank you for purchasing your new Schweigen Isodrive system. To get the maximum output from this unit, please read through this guide before use and installation. This guide contains important information on the correct use and maintenance of the unit, as well as important safety note...

Page 3 - Index

Page 3 Index 1. Welcome _____________________________________________________________________________________2 2. Your Safety Receiving your rangehood ______________________________________________________________________ 4 Before Installation ________________________________________________________...

Page 4 - Before Installation; Electrical Cord; RECEIVING YOUR RANGEHOOD

Page 4 2. Your Safety This appliance is not intended for use by person/s (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge. Unless the person has been given supervision or instruction concerning the use of the appliance by a person res...

Page 5 - Recommended Installation Distance

Page 5 2. Your Safety This guide is for the installation of the Isodrive motor system after the rangehood has been mounted on the wall or roof. (Refer to rangehood installation manual on how to install the rangehood). NOTE: All pipe and SteelFlex ™ ducting measurements are referring to inside measur...

Page 7 - Isodrive Motor; NOTE

Page 7 3. Description Isodrive Motor Included in the box: 1. Isodrive 950 motor (350W x 295H mm approx.) Approx. 3 metre, 10amp cable and standard plug (backdraft shutter and weather shield included) 2. Fire resistant 200mm metal pipe 3. SteelFlex ™ safety ducting. Approx. 4 metres, 200mm (210mm out...

Page 8 - Roof Installation

Page 8 4. Installation Roof Installation Recommended duct length: 950 motor — 4 metres. Mount 200mm metal pipe securely to beams, trusses or other appropriate structures: refer figure 1. The pipe should be mounted vertically with the roof penetration being sealed using a Dektite or other appropriate...

Page 9 - IMPORTANT

Page 9 4. Installation 950 motor Figure 1: Roof mount option IMPORTANT For more SteelFlex ™ ducting instructions, refer page 12. Fix fan module using side locking screw Connect to rangehood NOTE: Prevent any cord bunching by pulling cord through from plug top end NOTE: Recommended ducting length 4 m...

Page 10 - Wall Installation

Page 10 Wall Installation This type of installation is similar to roof mounting, ensuring that the pipe extends at least 55mm past the wall surface refer figure 3. If the pipe length is shortened, reproduce the power cord exit slot on the inside of the wall. IMPORTANT FOR 950 MOTOR: Weather shield m...

Page 13 - Assembling SteelFlex

Page 13 5. SteelFlex ™ Safety Duct Assembling SteelFlex ™ Safety Duct 1. Slide the steel ring clamp over the end of the duct then insert the 200mm metal pipe into the duct end Parts required: 1. SteelFlex ™ safety ducting 2. Steel ring clamps3. 200mm metal pipe4. 12mm self-drilling button head screw...

Page 14 - Shallow Roof Space; Important Note

Page 14 5. SteelFlex ™ Safety Duct Shallow Roof Space In shallow roof spaces, do not crush or kink SteelFlex ™ ducting, as it will reduce air flow severely. 90 degree curve made of PVC or galvanise can be used as a substitute for the bend. Figure 6: Shallow roof space Figure 7: SteelFlex ™ duct reco...

Page 15 - Securing SteelFlex

Page 15 5. SteelFlex ™ Safety Duct Securing SteelFlex ™ Safety Duct SteelFlex ™ safety duct must be installed with supports at maximum intervals of 1.5 metres. SteelFlex ™ safety ductwork can be supported by using good quality gaffer or aluminium foil tape. Provided that it does not restrict the int...

Page 17 - Measurements for Isodrive 950

Page 17 Figure 10: Measurements for Isodrive 950 7. Measurements Measurements for Isodrive 950 (Not to Scale) 160mm 85mm 350mm 295mm 190mm Dektite 50mm 275mm 430mm 200mm

Page 18 - Warranty; Disclaimer

Page 18 8. Warranty / Disclaimer Warranty (See warranty for more information) Isodrive motor has a 10-Year replacement product warranty.* The consumer is responsible for any charges associated with removal of the faulty unit and installation of the new unit. The customer is also responsible for any ...

Page 19 - Notes