Page 2 - Thank you for purchasing this Schweigen appliance.; must; be reported within; recognise any claim
Page 2 1. Welcome Thank you for purchasing this Schweigen appliance. To achieve the optimal performance from your appliance, and to avoid the risk of accident or damage, it is essential to read this manual before installation and first time use. This guide contains important information on the use a...
Page 3 - Table of Contents
Page 3 Table of Contents 1. Welcome ____________________________________________________________________ 2 2. Important safety information ___________________________________________________ 4 3. Description __________________________________________________________________ 7 4. Installation _______...
Page 4 - Important Safety Information; Any damage must be reported within 48 hours.; Do not use the rangehood without the grease filters.
Page 4 2. Important Safety Information Please read the instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual for future use or for subsequent owners. Check the appliance for damage after unpacking it. Do not connect or instal...
Page 5 - Before Installation; Please see our website; grounded connection; Before installing the electrical connections, you should:; circuit in the house where the rangehood is to be installed.
Page 5 2. Important Safety Information Before Installation We recommend this appliance be installed or repaired by a qualified Schweigen Home Appliances technician. Please see our website www.schweigen.com.au for a list of our recommended installers. It is dangerous to modify any part of this applia...
Page 6 - Match the Rangehood Size to your Cooktop; ADEQUATE
Page 6 2. Important Safety Information Match the Rangehood Size to your Cooktop Product Use The Rangehood has one mode of operation: Air extraction: The air is drawn in by the rangehood, filtered through the grease filters, and then expelled outside. Please check the cleaning and maintenance section...
Page 7 - Rangehood; For Isodrive motor 650 only
Page 7 3. Description Rangehood Female plug, to be connected to Isodrive motor system only Male Plug, to be connected to main power 240V Single 200mm Outlet Computer board* Reducer ( For Isodrive motor 650 only ) Filter Cabinet door protection strip Light Rangehood mounting brackets Instruction and ...
Page 8 - DO NOT
Page 8 4. Installation DANGER All electrical wiring from the motor to the rangehood should be kept inside the roof space. System Overview 1. Isodrive Motor 2. Roof Seal Kit (Dektite)* 3. Support Straps* 4. Attach Flexi Duct to Bell-Mouth Adaptor using cable tie or ring clamp. Please DO NOT rip the d...
Page 9 - Mounting Laws and Regulations; Minimum; Type of Cooktop Min. Height; Electric; Installation Height for Induction Cooktop; Notes; Induction; DANGER
Page 9 4. Installation Mounting Laws and Regulations • The location of the installation must have permanent openings for ventilation. • Regulations concerning the expelling of air must be fulfilled. • It is STRONGLY RECOMMENDED that the rangehood be installed centrally over the cooktop, this will gr...
Page 10 - Overhead cabinet Rangehood Installation position
Page 10 4. Installation Overhead cabinet Rangehood Installation position It is important to consider the benchtop and overhead cabinetry depth before installing the rangehood. The information below is to be used as a guide only, drawings are not to scale and do not account for all circumstances. The...
Page 11 - Fix the rangehood mounting supports (
Page 11 4. Installation Installation for UM-PA9S IMPORTANT Please read the installation guide thoroughly prior to installation. This model has a different method of installation compared to standard undermounts. Step 1 Fix the rangehood mounting supports ( A ) to the sides of the cabinet ( B ). Note...
Page 12 - install the reducer for any other motor; Protecting the Cabinet Door — Optional
Page 12 4. Installation Step 3 Fit the undermount in place, using the installation screws provided ( E ). Step 4 Only install the reducer if you are connecting the rangehood to the Isodrive 650 motor. DO NOT install the reducer for any other motor system. Step 5 Once the rangehood is fitted into the...
Page 14 - Electronic Controls
Page 14 To obtain the best performance, switch the rangehood on a few minutes prior to cooking and leave it running for at least 10 minutes after you have finished cooking. The buttons have the following functions: A.- Timer: When this function is activated, the blue light will flash on the timer bu...
Page 15 - Filters; • Filters should be cleaned every 3-6 weeks or after 40 hours of use.; WARNING; Cleaning and Maintenance; Catch A; Figure 2
Page 15 Filters • For this appliance to function effectively, regular maintenance is a must. • The function of the filter is to absorb the grease particles emitted during cooking. • Blocked filters and heavy oil deposits restrict airflow and may cause the motor to overheat and become a fire hazard. ...
Page 16 - Surfaces; motor with liquids or solvents.
Page 16 • For an induction cooktop, please aim to clean the filters at least every 10 days, depending on frequency of use. • The filters can be washed by hand or in the dishwasher Washing by hand - Immerse the filter in hot water and a suitable detergent, when clean, rinse with plenty of hot water. ...
Page 17 - Remove the glass perimeter chassis by removing the screws (
Page 17 DANGER Always switch off and disconnect power before replacing the lights. Failure to do so may cause serious injury. Please be aware that the light bulb may retain heat for a short period of time after being switched off. Replacing the Lights 6. Cleaning and Maintenance Type 4 (LED Strip TL...
Page 19 - • Do not take any action that will damage the product.; IMPORTANT
Page 19 Before you contact the technical service department, make sure that the product is plugged in and power is supplied. • Do not take any action that will damage the product. IMPORTANT Never attempt to repair this appliance by yourself. Always refer to a qualified Service Technician. Check elec...
Page 20 - A service request will require the following information:; Faulty Installation
Page 20 Calling the Technical Assistance Service Hotline In the event that the failure is not due to the faults mentioned in Trouble Shooting, contact Customer Service. In Australia, Customer Service 1300 829 066 In New Zealand, Customer Service 0800 200 510 Lodging an online Service Request In the ...
Page 21 - x LED Strip 726mm long; Technical specifications
Page 21 Model: UM-PA9S Feeding Voltage: 220-240V 50Hz Max Lamp Power: 1 x LED Strip 726mm long 3.36W 12V 4200K 8. Technical specifications 895 895 860 328 20.7 42 140 295 295 337.2 19.6 247 199 348 22