Sceptre SQ3200 - Manuals - manualsarea.com

Page 2 - IMPORTANT INFORMATION

- 2 - www.SCEPTRE.com QUASAR SQ3200* User Manual IMPORTANT INFORMATION

Page 3 - SAFETY INSTRUCTIONS

- 3 - www.SCEPTRE.com QUASAR SQ3200* User Manual SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However...

Page 6 - Television Antenna Connection Protection; External Television Antenna Grounding

- 6 - www.SCEPTRE.com QUASAR SQ3200* User Manual IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide som...

Page 7 - Opening the Package; Installation

- 7 - www.SCEPTRE.com QUASAR SQ3200* User Manual Opening the Package The QUASAR TV is packaged in a carton. Any standard accessories are packed separately in another carton. The weight of the TV is approximately 12.77 lbs. Due to the size and weight of the product, it is suggested that it must be ha...

Page 8 - Attaching or Removing the Stand; thick; screws

- 8 - www.SCEPTRE.com QUASAR SQ3200* User Manual Attaching or Removing the Stand 1. Place the display unit flat on a table. Afterwards attach the plastic base onto the neck by form fitting the circular hole. Remember the plastic base should have more area facing the front of the neck. Fit the metal ...

Page 9 - Table of Contents

- 9 - www.SCEPTRE.com QUASAR SQ3200* User Manual Table of Contents IMPORTANT INFORMATION .............................................................................................................. 2 SAFETY INSTRUCTIONS ...............................................................................

Page 10 - Identifying Front and Rear Panel; Front View; Rear View Mounting Pattern

- 10 - www.SCEPTRE.com QUASAR SQ3200* User Manual Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. The TV might take 10 – 12 seconds to power on. This is considered to b...

Page 11 - Side Control Buttons

- 11 - www.SCEPTRE.com QUASAR SQ3200* User Manual Side Control Buttons 1. VOL(+) – This button increases the TV’s volume. If a sub-menu is active, pressing this button will move the select right. 2. VOL(-) – This button decreases the TV’s volume. If a sub-menu is active, pressing this button will mo...

Page 12 - Rear View Connections

- 12 - www.SCEPTRE.com QUASAR SQ3200* User Manual Rear View Connections 1. TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For ov...

Page 13 - SPDIF; Analog Audio Out –; HEADPHONE; USB –

- 13 - www.SCEPTRE.com QUASAR SQ3200* User Manual 6. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can...

Page 14 - QUASAR Remote Control

- 14 - www.SCEPTRE.com QUASAR SQ3200* User Manual QUASAR Remote Control This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or satellite tech support.

Page 16 - Installing Batteries to the Remote Control

- 16 - www.SCEPTRE.com QUASAR SQ3200* User Manual Installing Batteries to the Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach t...

Page 17 - Connection; Suggestions; If You Have Digital Cable without Cable Box or Antenna...

- 17 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connection Suggestions If You Have Digital Cable without Cable Box or Antenna… 1. Make sure the power of HDTV is turned off. 2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your HDTV. 3. Turn on the HD...

Page 18 - Connecting DVD Player with Component YPbPr...

- 18 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connecting DVD Player with Component YPbPr… 1. Make sure the power of HDTV and your DVD player is turned off. 2. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your ...

Page 19 - Connecting WiiTM with Composite...

- 19 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connecting Wii™ with Composite… 1. Make sure the power of HDTV and your Wii™ is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your HDTV. 3. Ob...

Page 20 - Connecting Cable or Satellite boxes with HDMI...

- 20 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connecting Cable or Satellite boxes with HDMI… 1. Make sure the power of HDTV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your HDTV. 3. Turn on t...

Page 21 - Connecting to a PC with VGA and 3.5 mm minijack ...

- 21 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connecting to a PC with VGA and 3.5 mm minijack … 1. Make sure the power of HDTV and your PC is turned off. 2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your HDTV . 3. Obtai...

Page 22 - Connecting a Digital Audio Receiver with Coax SPDIF...

- 22 - www.SCEPTRE.com QUASAR SQ3200* User Manual Connecting a Digital Audio Receiver with Coax SPDIF… 1. Make sure the power of HDTV and your receiver is turned off. 2. Obtain a coax SPDIF cable, connect it to your receiver’s coax SPDIF digital input and the coax SPDIF connection on the LINE OUT po...

Page 23 - Switching Sources

- 23 - www.SCEPTRE.com QUASAR SQ3200* User Manual Switching Sources 1. Press the SOURCE button on the right of the TV to switch sources.

Page 24 - Ready to Watch Some TV?; Starting up the HDTV; If You’ve Connected Antenna or Cable to the TV...

- 24 - www.SCEPTRE.com QUASAR SQ3200* User Manual Ready to Watch Some TV? Starting up the HDTV 1. Make sure your power cable is connected and the standby red light in the front of the TV is lit up. 2. Check all your connection cables off the side or the back of your TV and also your AV devices. Make...

Page 25 - Via Remote Control; Via TV Side Panel Buttons

- 25 - www.SCEPTRE.com QUASAR SQ3200* User Manual OSD (On Screen Display) Controls Via Remote Control In order to adjust most of the options inside the On Screen Display (OSD), the picture below shows all the buttons used on the remote control. – This button opens the OSD and also exits the OSD by g...

Page 26 - PICTURE

- 26 - www.SCEPTRE.com QUASAR SQ3200* User Manual OSD (On Screen Display) Options PICTURE – This main option has functions for changing the picture settings for all ports, such as tint, contrast, sharpness. SOUND – This main option has functions for changing sound settings for all ports, such as SPD...

Page 29 - SOUND

- 29 - www.SCEPTRE.com QUASAR SQ3200* User Manual SOUND This option allows users to adjust the TV’s sound functions. 1. Press MENU to open the OSD. 2. Press ◄ or ► to select SOUND and press ENTER . 3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. SOUND SETTIN...

Page 31 - CHANNEL

- 31 - www.SCEPTRE.com QUASAR SQ3200* User Manual CHANNEL This option allows user to adjust the TV’s tuner functions. 1. Press MENU to open the OSD. 2. Press ◄ or ► to select CHANNEL and press ENTER . 3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. CHANNEL L...

Page 32 - PARENTAL

- 32 - www.SCEPTRE.com QUASAR SQ3200* User Manual PARENTAL This option allows users to filter TV programs and movies while using the TV tuner. To use this option you will need to enter in the password first. 1. Press MENU to open the OSD. 2. Press ◄ or ► to select PARENTAL CONTROL and press ENTER . ...

Page 33 - SETUP

- 33 - www.SCEPTRE.com QUASAR SQ3200* User Manual SETUP This option allows user to adjust the TV’s miscellaneous options. 1. Press MENU to open the OSD. 2. Press ◄ or ► to select SETUP and press ENTER . 3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. CLOSED ...

Page 35 - OTHERS

- 35 - www.SCEPTRE.com QUASAR SQ3200* User Manual OTHERS This option allows users to set other features of the TV. 1. Press MENU to open the OSD. 2. Press ◄ or ► to select OTHERS and press ENTER . 3. Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or ENTER to adjust them. I. BLUE BACK – T...

Page 36 - Detailed Explanations; USB Connection Explained

- 36 - www.SCEPTRE.com QUASAR SQ3200* User Manual Detailed Explanations USB Connection Explained The TV is a widescreen TV with an USB port. With the USB port the TV can access USB flash drives (up to 2GB) and display pictures or play MP3 files. To use this feature connect a USB flash drive to the U...

Page 38 - Closed Captioning (digital and analog) Explained; Ratings Explained

- 38 - www.SCEPTRE.com QUASAR SQ3200* User Manual Closed Captioning (digital and analog) Explained Your TV is equipped with an internal Closed Caption decoder. It allows you to view conservations, narration and sound effects as subtitles on your TV. Closed Captions are available on most TV program, ...

Page 41 - Shortcuts to Browsing Channels

- 41 - www.SCEPTRE.com QUASAR SQ3200* User Manual Shortcuts to Browsing Channels Browsing through the entire channel list on the TV can be tedious. This TV features a favorite channel list, where you can add in channels that you always want to watch TO ADD TO THE FAVORITE LIST 1. Go to any channel y...

Page 42 - How do I clean the TV ?

- 42 - www.SCEPTRE.com QUASAR SQ3200* User Manual How do I clean the TV ? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the TV. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LCD...

Page 43 - Troubleshooting

- 43 - www.SCEPTRE.com QUASAR SQ3200* User Manual Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions Connect power cord correctly. Turn on power. Connect video cable corre...

Page 46 - Call Us If You Need Help!; Please have your SCEPTRE p/n number, serial number, and date

- 46 - www.SCEPTRE.com QUASAR SQ3200* User Manual Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone...

Page 47 - Specification

- 47 - www.SCEPTRE.com QUASAR SQ3200* User Manual Specification Display panel Item Illustration Active Area / Screen Size Diagonal 31.5 inches Aspect Ratio Widescreen 16:9 Max. of Pixels (Resolution) HD (1366 x 768 pixels) resolution Brightness 250 cd/m² Contrast 3000:1 with Auto Contrast Enhancemen...

Page 49 - LIMITED PRODUCT WARRANTY

- 49 - www.SCEPTRE.com QUASAR SQ3200* User Manual LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished produ...

Page 52 - FCC Compliance Statement

- 52 - www.SCEPTRE.com QUASAR SQ3200* User Manual FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includin...