Samson XP1000 - Manuals - manualsarea.com

Page 3 - Important Safety Information

XP1000 • Portable PA System Important Safety Information WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triang...

Page 6 - Contents

Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 XP1000 Mixer Layout . . . . . . . . . . . . . . . . . . . . . . . . 9 Pairing with a Bluetooth® device . . . . . . . . . . . . . . . . . . 12 Set...

Page 7 - Introduction

7 XP1000 • Portable PA System Thank you for purchasing the Expedition XP1000 PORTABLE PA SYSTEM from Samson! The XP1000 delivers the optimum balance between huge, awesome sound and portability. The system is light enough for one person to carry, and packs togeth-er into a single unit, making it amaz...

Page 8 - Features

8 The Samson Expedition XP1000 is a compact portable PA system with dual 2-way speakers, onboard mixer and 1000 watt power amplifier. Here are some of the main features: • Lightweight and designed to allow you to connect all the pieces together into a sin-gle, easy to move case. • The mixer is store...

Page 12 - Pairing with a Bluetooth® device

12 Bluetooth® is a wireless communication technology that allows for connectivity between a wide range of devices. The XP1000 uses Bluetooth to stream high quality audio from your Bluetooth enabled device without the need for connecting any cables. In order for your device to work with the XP1000 it...

Page 15 - Quick Start

15 XP1000 • Portable PA System Quick Start 1. Be sure that the XP1000’s POWER switch is set to the OFF position. 2. If the speakers are not connected, connect the speaker wires as described in the previous section. 3. Turn each of the channel LEVEL and MASTER volume controls fully counterclock- wise...

Page 17 - Applying Effects; Avoiding Feedback

17 XP1000 • Portable PA System Applying Effects The XP1000 features built-in, high quality, 24-bit digital effects that you can add to channels 1 through 4. You can use effects like delay or reverb to enhance vocals or ambiance to the mix by following the steps below: 1. Connect a mic or instrument ...

Page 21 - Wiring Guide; Unbalanced 1⁄4” Connector; Stereo TRS 3.5mm Connector

21 XP1000 • Portable PA System Wiring Guide Unbalanced ¼” Connector Balanced TRS ¼” Connector XLR Balanced Connector Signal Ground Ground Sleeve (ground) Signal Tip (signal) +Signal (tip) +Signal (tip) -Signal (tip) Ring (-signal) Tip (+signal) Ground -Signal (ring) Ground Sleeve (ground) -Cold (3) ...

Page 22 - Specifications

22 Specifications Amplifier Power (0.5% THD at 1KHz) 1000 W @ 4Ω (500 W per channel) Peak 500 W @ 4Ω (250 W per channel) Average Frequency Response 20 Hz - 20 kHz Power Consumption AC INPUT 100V~240V,50/60Hz 800W Speakers Low Frequency 10” bass transducer High Frequency 1” tweeter Mixer Inputs XLR, ...

Page 23 - Block Diagram