Samson SERVO 200 - Manuals - manualsarea.com

Page 3 - Table of Contents

Copyright 2005, Samson Technologies Corp. Printed March, 2005 Samson Technologies Corp.575 Underhill Blvd.P.O. Box 9031Syosset, NY 11791-9031Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 516-364-3888 Table of Contents Introduction 2 Servo Series Features 3 Guided Tour 4-5 Front Panel 4 Rear Panel 5 Set...

Page 4 - Introduction

2 Introduction Thank you for purchasing the Servo Series Power Amplifier from Samson Audio! We know you don’t like reading own- Thank you for purchasing the Servo Series Power Amplifier from Samson Audio! We know you don’t like reading own- Thank you for purchasing the Servo Series Power Amplifier f...

Page 5 - Servo Series Features

3 Servo Series Features The Samson Servo Series power amplifier utilizes the latest technology in professional power amplifier design. Here are some of its main features: • Power to spare - Each amplifier delivers the following power ratings. Servo 200 2 x 66 Watts at 8Ω, 2 x 100 Watts at 4Ω Servo 3...

Page 6 - Guided Tour - Front Panel

Guided Tour - Front Panel 1: Fan Vent - The Servo Series amplifiers stay cool thanks to their twin, forced-air cooling tunnels. Cool air is drawn through the front panel fan vents, reducing the temperature of the internal components while forcing the heat out the rear vents. The fans will actually s...

Page 7 - Guided Tour - Rear Panel

5 Guided Tour - Rear Panel 1: RCA Input connectors – You can connect unbalanced incoming signals to the Servo series using the RCA connectors, which are wired as follows: Pin 2 (or Tip) hot, and Pin 1 (or Sleeve) ground. The Servo Series accepts input levels of any strength but needs at least -10dBV...

Page 8 - Setting Up and Using Your Servo Series

6 Setting Up and Using Your Servo Series Bridge / Stereo switch Output connectors Input connectors Protection LED Channel Input control Three-segment LED meter Setting up your Servo Series is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of nee...

Page 9 - The Servo Series Protection Circuitry

7 The Servo Series Protection Circuitry As noted in the “Guided Tour” section of this manual, the Servo Series front-panel Protection LED indicates the activity of the relay speaker connection circuitry. When the Protection LED is lit, this circuitry is active, and all connected speakers are muted (...

Page 11 - Servo Series Connections

The illustrations on this page show the required interconnections when using the Servo Series in Stereo and Bridged modes. Servo Series Connections 9 + - - + (4 ohm min) (4 ohm min) �� + - - + (4 ohm min) (4 ohm min) �� + - - + + - + - (8 o...

Page 12 - Specifications

10 Specifications Servo 200 Servo 300 Servo 600 Servo 200 Servo 300 Servo 600 Servo 200 Servo 300 Servo 600 Stereo both channel driven 8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2 8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2 8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2 4 ohms 100 Watts x 2 ...

Page 14 - Appendix B: Frequency Response

12 Appendix B: Frequency Response Linearity (0 dB Ref ) vs. Frequency sweep 10 Hz - 50 kHz Typical for all Servo models 5.0000 4.0000 3.00002.00001.00000.0-1.000-2.000 -3.000 -4.000-5.000 10 100 1k 10k 50k Ap AUDIO PRECISION Servo 600 LEVEL (dBr) vs FREQ (Hz) 0dB ref

Page 16 - Samson Technologies Corp.

Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com