Samson PowerBrite Pro7 - Manuals

Page 2 - Table of Contents

Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1997, 1998, Samson Technologies Corp. Printed March, 1998 Samson Technologies Corp.575 Underhill Blvd.P.O. Box 9031Syosset, NY 11791-9031Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 516-364-3888 Table of Contents Introduction ...

Page 3 - Introduction; Return Authorization

Introduction Congratulations on purchasing your Samson PowerStrip, PowerBrite, orPowerBrite Pro! This manual covers three products: the PowerStripPS9; the PowerBrite PB9; and the PowerBrite Pro7. All three of thesesingle-space rack units provide multiple outlets for reliable powerdistribution with 3...

Page 4 - System Features; • Rear-panel switched outlets are mounted both vertically and

System Features The Samson PowerStrip PS9, PowerBrite PB9, and PowerBrite Pro7all utilize state-of-the-art technology in power distribution and areengineered to the finest detail. Here are some of their main features: • Multiple switched rear-panel AC outlets (eight in the PowerStrip PS9 and PowerBr...

Page 5 - PowerStrip PS9 Front Panel; When on, the status light inside this switch is lit red.; : Unswitched convenience outlet; - This circuit breaker will trip whenever the total load

Guided Tour - PowerStrip PS9 Front Panel 1: Outlets switch - Use this to turn the rear-panel outlets on or off. When on, the status light inside this switch is lit red. 2: Unswitched convenience outlet - This 3-pin AC outlet is active whenever the PS9 is plugged in, regardless of the setting of the ...

Page 6 - - Similar to the AC outlets

Guided Tour -PowerStrip PS9 Rear Panel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on andoff from the front panel Outlets switch (see #2 on the previous page). 2: Switched AC outlets (vertical mount) - Similar to the AC ...

Page 7 - PowerBrite PB9 Front Panel; - Use this to turn the fluorescent light in the slide-out; : Unswitched convenience outlet

5 Guided Tour - PowerBrite PB9 Front Panel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the LED inside this switch lights red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off. When on, the LED inside this switch lights red...

Page 8 - : Fluorescent starter; - This is a standard 4 watt, 110 volt condenser

6 Guided Tour -PowerBrite PB9 Rear Panel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on andoff from the front panel Outlets switch (see #2 on the previous page). 2: Switched AC outlets (vertical mount) - Similar to the A...

Page 9 - PowerBrite Pro7 Front Panel; : Unswitched convenience outlet

Guided Tour - PowerBrite Pro7 Front Panel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the status light inside this switch is lit red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off. When on, the status light inside this ...

Page 10 - : Fluorescent starter

Guided Tour -PowerBrite Pro7 Rear Panel 1: Lamp switch - Used to turn on or off a connected Littlite®- compatible lamp (see #2 below). 2: Lamp connector - If required, you can connect a Littlite®- compatible lamp to this 12 VDC female XLR jack. 3: Switched AC outlets (horizontal mount) - Connect ext...

Page 12 - Changing the PowerBrite Bulb

10 Changing the PowerBrite Bulb The 4-watt fluorescent bulb in your PowerBrite PB9 and Pro7 is rated to deliverapproximately 3,000 hours of operation. That’s a long time, to be sure, butthere will probably come a time when you’ll need to replace it. The good newsis that the bulb itself is readily av...

Page 13 - Specifications

11 Specifications Electrical: Number of Outlets PS9 and PB9 8 switched, 1 unswitched Pro7 6 switched, 1 unswitched Max. Current 15 Amp (circuit breaker protected) Input Voltage (RMS) 0 to 130 Vac continuous Spike Protection Mode Hot to Neutral, Hot to Ground, and Neutral to Ground Max. Clamping Volt...

Page 15 - Thank you for purchasing the; Get Your; YOUR LOGO; Please choose one of the following options:; mailed in a; padded; envelope; Send artwork and check or money order to:; PowerBriteTM Nameplate Order Form; Ordering a Custom Nameplate; Sales Tax; form for when ordering nameplates.

LIGHT OUTLETS UNSWITCHED 15 AMPERES SAMSON 15 PowerBrite ™ PB9 AMP PUSH PUSH Thank you for purchasing the SAMSON PowerBrite ™ Get Your Nameplate Customized! Illuminate any image that will fit within the available space—4 1/8 wide x 3⁄4 high. Personalize your front nameplate by following the instruct...

Page 16 - After you have received your new Custom Nameplate film, it’s a

Changing the PowerBrite Nameplate After you have received your new Custom Nameplate film, it’s a simple matter to install it. Begin by unplugging your PowerBrite and thenunplug all devices connected to the rear and/or front panel outlets.Remove the PowerBrite from your rack and use both fingers to p...