Samson PBPRO7 - Manuals - manualsarea.com

Page 2 - Produced by On The Right Wavelength for Samson Technologies Corp.; Table of Contents

Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1997, 1998, Samson Technologies Corp. Printed March, 1998 Samson Technologies Corp.575 Underhill Blvd.P.O. Box 9031Syosset, NY 11791-9031Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 516-364-3888 Table of Contents Introduction ...

Page 3 - Introduction

Introduction Congratulations on purchasing your Samson PowerStrip, PowerBrite, orPowerBrite Pro! This manual covers three products: the PowerStripPS9; the PowerBrite PB9; and the PowerBrite Pro7. All three of thesesingle-space rack units provide multiple outlets for reliable powerdistribution with 3...

Page 4 - System Features; • Rear-panel switched outlets are mounted both vertically and

System Features The Samson PowerStrip PS9, PowerBrite PB9, and PowerBrite Pro7all utilize state-of-the-art technology in power distribution and areengineered to the finest detail. Here are some of their main features: • Multiple switched rear-panel AC outlets (eight in the PowerStrip PS9 and PowerBr...

Page 5 - PowerStrip PS9 Front Panel

Guided Tour - PowerStrip PS9 Front Panel 1: Outlets switch - Use this to turn the rear-panel outlets on or off.When on, the status light inside this switch is lit red. 2: Unswitched convenience outlet - This 3-pin AC outlet is activewhenever the PS9 is plugged in, regardless of the setting of the Ou...

Page 7 - PowerBrite PB9 Front Panel

7 Guided Tour - PowerBrite PB9 Front Panel 1: Light switch - Use this to turn the fluorescent light in the slide-outdrawer on or off. When on, the LED inside this switch lights red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.When on, the LED inside this switch lights red. ...

Page 9 - PowerBrite Pro7 Front Panel

Guided Tour - PowerBrite Pro7 Front Panel 1: Light switch - Use this to turn the fluorescent light in the slide-outdrawer on or off. When on, the status light inside this switch is lit red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.When on, the status light inside this sw...

Page 12 - Changing the PowerBrite Bulb

12 Changing the PowerBrite Bulb The 4-watt fluorescent bulb in your PowerBrite PB9 and Pro7 is rated to deliverapproximately 3,000 hours of operation. That’s a long time, to be sure, butthere will probably come a time when you’ll need to replace it. The good newsis that the bulb itself is readily av...

Page 13 - Specifications

13 Specifications Electrical: Number of Outlets PS9 and PB9 8 switched, 1 unswitched Pro7 6 switched, 1 unswitched Max. Current 15 Amp (circuit breaker protected) Input Voltage (RMS) 0 to 130 Vac continuous Spike Protection Mode Hot to Neutral, Hot to Ground, and Neutral to Ground Max. Clamping Volt...

Page 15 - Congratulations and thank you for purchasing the; PowerBrite Pro; YOUR LOGO; Ordering a Custom Nameplate

Congratulations and thank you for purchasing the SAMSON PowerBrite Pro ™ or PowerBrite ™ Get Your Nameplate Customized! Illuminate any image that will fit within the available space—4 1/8 ″ wide x 3⁄4 ″ high. Personalize your front nameplate by following the instructions: YOUR LOGO 4 1/8" 4 1/2&...