Samson G10 - Manuals

4 Guided Tour - Front Panel 1 INPUT - Connect your guitar to this standard 1/4” unbalanced jack. This G Series Input was designed to handle the signals from a guitar with a wide range of output levels from lipstick single coils to the beefiest humbucker. 2 CHANNEL switch - The switch allows you to s...

1. Remove all packing materials (save them in case of need for future service) and decide where the amplifier is to be physically placed. To avoid potential overheating problems, make sure that the rear panel is unobstructed and that there is good ventilation around the entire unit. 2. Before you pl...

8. Next, adjust the BASS and TREBLE equalizer controls to taste. (When you get a great setting that complement your instrument and playing style, it’s a good idea to write it down for future use.) 9. Now, let's get a burnin overdrive tone. First, turn the VOLUME KNOB to 0 (fully counterclockwise) an...

7 7 G10 Sample Settings The G Series combos are powerful amps with a lot of personality. The amplifiers offer guitarist a wide range of sounds and after playing just a short time; you’ll find the tone that's perfectly suited for your playing style and your sound. To get you started, try some of the ...

Specifications Rated Output Power 10 w Input Impedance 1M OHM Headphone Output 200 mW (typical) @ 600 ohms Connector 1/4-inch Phone Jack Fuse Rating US & Japan 1A UK & European 2A Weigh t 8.8 lbs. (3.99 kg) Dimensions 12.05” (306 mm) H x 10.75” (273 mm) W x 6.5” (165 mm)D