Samson EX20 - Manuals - manualsarea.com

Page 3 - Introduction

Introduction 3 Welcome to Samson Expedition—the portable audio system for the new millenium! Thisexceptionally versatile system offers the perfect solution wherever you need portable,high-quality audio: as a main PA system or as onstage monitors in clubs andperformance halls; in houses of worship; a...

Page 4 - System Features; SAMSON

System Features The Samson Expedition system uses state-of-the arttechnology to bring a revolutionary new degree offlexibility and portability to professional audio. Itsmain features include: • A built-in telescoping handle and locking wheels that make it easier than ever before to transportyour aud...

Page 6 - Expedition EX10; Guided Tour

Expedition EX10 Guided Tour 1: 1/4" input - Use this standard 1/4" connector to connect signal from a poweramplifier (rated at up to 250 watts into 8 ohms) to the EX10. 2: Speakon™ input - Alternatively, you can use this Speakon™ connector toconnect signal from a power amplifier (rated at up...

Page 8 - Expedition EX20; : Power switch - Use this to turn power to the EX20 on or off.; Interconnecting the EX20

8 Expedition EX20 Guided Tour 1: Input connector - Use this balanced female XLR connector to routeline-level signal into the EX20. 2: Output VU meter - This three-segment bar meter shows the EX20output level. For optimum signal-to-noise ratio, set the Volume control(see #6 below) so that program mat...

Page 10 - Expedition EX30

10 Expedition EX30 Guided Tour 1: Equalizer - These controls allow you to shape your sound by boosting orcutting the amount of bass (at 100 Hz) or treble (at 10 kHz) by up to 15 dB.A center detent in each knob indicates no boost or cut (that is, flat response).As each knob is turned clockwise from t...

Page 12 - Interconnecting the EX30

12 Expedition EX30 15: CD inputs - Connect the outputs of a CD or tape player to this set of dual phonojacks. Signal arriving here returns to stereo channel 3/4. If an optional TD30 cassetteplayer is installed, note that its output also arrives at channels 3/4, in addition to line-levelsignal arrivi...

Page 14 - Positioning and Mounting Instructions; General Positioning Tips; Fly Mounting, Wall Mounting, and Ceiling Mounting

14 Positioning and Mounting Instructions General Positioning Tips • Operating a microphone or turntable in front of a speaker is a sure formula for feedback and/or rumble problems, so always place the Expedition infront of any mics or turntables that are being used. • Use the Expedition upright for ...

Page 16 - Expedition Accessories; SOFT

16 As shown in the illustration on the left, the top panel of the Expedition EX20 andEX30 provides a prewired compartment that accommodates any of threedifferent Samson wireless receivers: the UM1 or M32 UHF models or the VM1VHF model. Output signal from a wireless receiver mounted in an EX30 arrive...

Page 17 - Specifications

17 Specifications Power Rating: (@ 8 Ω ): EX10 250 Watts Program; 400 Watts Max. Peak EX20, EX30 160 Watts LF; 40 Watts HF Frequency Response: (all models) 60 Hz – 15 kHz ± 3 dB Sensitivity: EX10 97 dB SPL @ 1W/1m Crossover Frequency: EX10 2.3 kHz (12 dB Per Octave) EX20, EX30 2.3 kHz (24 dB Per Oct...