Samson 10S - Manuals

MediaOne 10S 10” Active Studio Subwoofer 1. VOLUME – Controls the overall output level for the MediaOne 10S subwoofer. 2. LOW PASS (Hz) – Adjusts the low frequency filter end range of the subwoofer from 80Hz-160Hz. This setting does not affect the signal sent to the LINE OUT jacks. 3. POWER AUTO Sle...

8 Adding the MediaOne 10S to a Monitor System Adding a MediaOne 10S subwoofer to extend the low frequency response of your monitor system can be beneficial when mixing your music. Typically, it is best to set the subwoofer level to be equal to that of the main speakers. Because deep-bass frequencies...

MediaOne 10S 10” Active Studio Subwoofer THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UND...

10 Stereo Receiver INPUT – + INPUT – + Connection the Media One 10S - Speaker Level Input The MediaOne 10S can be operated using speaker level inputs and outputs. When using the MediaOne 10S at speaker level, the full range powered signal is maintained at the outputs. Below is a typical system set-u...

MediaOne 10S 10” Active Studio Subwoofer Specifications Woofer 10”, Long Excursion Transducer Enclosure Type Bass Reflex System Enclosure Vinyl wrapped MDF cabinet with mesh grille Frequency Response 35Hz - 300Hz ±3dB Crossover Frequency 100Hz 12db/oct Linkwitz Riley Low Pass Filter 80-160Hz Output ...