Russound CAM6.6X-S1/S2 - Manuals
Russound CAM6.6X-S1/S2 – Manual in PDF format online.
Manuals:
Manual Russound CAM6.6X-S1/S2
Summary
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit...
TABLE OF CONTENTS 3 USER SECTION Product Introduction ............................................................................................................6 Component Guide CAM6.6 Controller..........................................................................................................
4 TABLE OF CONTENTS Making Connections UNO Keypad Port Connections ...........................................................................................36Source Audio Input Connections .........................................................................................37Source IR Input Co...
5 USER SECTION Component Guides Explains front panel features of the CAM6.6 controller, UNO-S1 keypad, UNO-S2 keypad and UNO-LRC1 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu. IN PU T MUTE LA ST SL...
6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6X-S1/S2 System to enhance your home with distrib- uted audio. It combines the CAM6.6 Controller Amplifier and UNO keypads into a state-of-the-arthome audio system that blends seamlessly with your unique lifestyle and preferences. Bes...
7 USER COMPONENT GUIDE CAM6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is "on" in the up position. Any ac...
8 USER COMPONENT GUIDE UNO-S1 Keypad-Front Panel LCD PANEL - 5-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUM...
9 CD PLAYER 1 LCD PANEL - 12-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and low...
10 USER COMPONENT GUIDE UNO-LRC1 Remote Control LOCAL DEVICE BUTTONS - Select localsource to be controlled by UNO-LRC1. SETUP - Use for programming UNO-LRC1 usingthe built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNOKeypad for control by UNO-LRC1. ROOM ON/OFF - Turns room on a...
11 USER OPERATION UNO-S1 Keypad Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release to turn o...
12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. To enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes whileusing t...
14 The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. The following keys are used to navigate andmake changes while using the User Menu: To enter the User Menu, press and hold during normal operation. To exit the User Menu, press and release . Ad...
15 XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal delivered by satellite and (depend-ing on location) transferred by terrestrial antennas. The radio is a subscription-based service with amonthly provider fee and an activation charge. XM radio broadcasts several...
16 XM Radio Modes There are four user “modes” for selecting music on the XM Tuner: Preset (default or normal) Category SearchNow PlayingDisplay Preferences . These modes are accessed through certain button and key presses from the tuner panel, remotecontrols and keypads. When choosing modes, if no c...
18 Category Search Mode ( 1 1..C CA AT T S SE EA AR RC CH H ) XM Radio is organized by Channel Category (e.g., Rock, Country, News ). Within each category is a series of channels (e.g., Top Tracks, Bluegrass Junction, XM Classics). Channel selection in thismode is refined to scrolling only those cha...
19 Now Playing Mode ( 2 2..N NO OW W P PL LA AY YN NG G ) This mode displays information about the current XM selection. Appropriate button presses accessthe next or previous information item. N NA AM ME E:: Displays the artist’s name, feature name or program name (news, talk, sports). T TI IT TL LE...
20 UNO-S1 Keypad Control of Tuner Selecting the tuner On the UNO-S2 keypad, press to select the XM Tuner by choosing the tuner’s preassigned source number (1). Selecting the desired channel Press and hold and to activate manual channel selection. Once active, press or to scroll through channels. The...
21 USER INTERNAL SOURCE - XM TUNER UNO-S2 Keypad Control UNO-S2 Keypad Control of Tuner Selecting the tuner On the UNO-S2 keypad, press to select the XM Tuner by choosing the tuner’s preassigned source number (1). Selecting a Mode Push to toggle between XM modes. Exiting a Mode Press to exit XM mode...
22 XM Classics TUNER SELECTION - Select source number assigned to XM TUNER (1) TUNE UP/DOWN - Used for manual channel selection SELECT - XM operating mode toggle SEEK - (press) Exit current XM mode SCAN - (press and hold) XM Signal Strength modetoggle MUTE - Mutes/unmutes tuner audio output BANK SEL...
23 USER INTERNAL SOURCE - XM TUNER UNO-LRC1 Remote Control UNO-LRC1 Remote Control of Tuner Selecting the tuner To select the XM tuner, push and choose the source number preassigned to the XM Tuner (1), or use the UNO numeric source inputs at the bottom of the UNO-LRC1. Selecting a Mode Push , or to...
25 INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and wiring instructions. Component Guides Reviews front and back panel features of the CAM6.6 controller and the UNO-S1 and UNO-S2keypads. Keypad Installation Explains UNO-S1 and UNO-S2 keypad installation...
26 INSTALLER GETTING STARTED Unpacking the System Components • Keep the original carton and packing materialsfor future shipment or storage. • Check for any visible signs of damage. If youencounter any concealed damage, consult yourRussound dealer before proceeding to install theunit. • Retain the s...
INSTALLER WIRING INSTRUCTIONS RJ-45 Connections The CAT-5 T568A wiring standard shown on theright is used for the RJ-45 terminations. Keypad Wiring For the UNO-S2 and UNO-S1 keypad, the follow-ing connections are used to terminate the CAT-5wire to the 110 punchdown on the keypad: CAT-5 WIRE COLOR TY...
28 17 16 14 12 13 15 19 18 20 CAM6.6 A NTENNA RNET LINK IN AND LINK OUT - Links multiple CAM6.6’s, also links future Russoundcomponents that are RNET compatible RS-232 INTERFACE - The RS-232 Interface allows the zones to be controlled by PCor other devices that have an RS-232 Interface. The RS-232 I...
29 INSTALLER COMPONENT GUIDE CAM6.6 Controller-Rear Panel OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, XM radiomodule AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cord connectionfor...
30 INSTALLER COMPONENT GUIDE UNO-S1 Keypad-Update Port OS Update/Run Jumper -The pins are jumpered when performing an OS update on the key-pad, and removed during normal operation.(Typically needed only on a keypad that has never been updated) Setup Button - Activates information and update menus fo...
31 INSTALLER COMPONENT GUIDE UNO-S1 Keypad-CAT-5 Connection 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between theUNO-S1 Keypad and the CAM6.6 controller. 1 1 N EWMARKET , NH U.S.A. DESIGNED IN USA MADE IN K OREA BR GR OR +12V BR/W +12V GND GR/W GND OR/W COM A BL/W COM B BL IR OUT UN...
32 INSTALLER COMPONENT GUIDE UNO-S2 Keypad-Update Port SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDATE PORT - The OS Update Port is used to update the UNO-S2 Keypad oper-ating system software in the future. If an update is released, it will be available onlinethrough th...
33 K OREA EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver. OS UPDATE JUMPER - Selects “Run” or “OS Update” mode. RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between theUNO-S2 Keypad and the CAM6.6 ...
34 INSTALLER UNO-S1 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achievedwith the keypad away from any direct sunlight,plasma TV, and low voltage lighting controls. Alsoconsider convenience when choosing a location. Choose a place that is easily seen from the posi-tion...
35 INSTALLER UNO-S2 KEYPAD-INSTALLATION Keypad Location Plastic Double-Gang Electrical Box UNO-S2 Back Plate Screw Screw Screwless Cover Plate Keypad Installation To install a double-gang keypad, you will need touse a UL/CSA approved plastic double-gangelectrical box. Route CAT-5 wire to the junctio...
36 CAM6.6 A NTENNA CAT-5 Cable CAT-5 Cable PM Mod 3Dwith RJ-45 CAT-5 Cable SA-ZX3 1201A/1A Power Supply CAM6.6X The UNO System Keypad Ports are located onthe back of the CAM6.6 in the top left of center.Connections made at the UNO Keypad Ports aremade using CAT-5 T568A RJ-45 wire configura-tion. CAT...
37 Source Audio Connections The CAM6.6 supports up to six audio sources.The Source Inputs are located at the back panel.The Source 1 input serves a dual purpose. If theCAM6.6 optional internal source is used, theSource 1 inputs are not available, and the switchnext to it is set to “Internal Source O...
38 INSTALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6allows control of any source equipment withoutthat source being selected on the keypad. Theconnection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound...
41 CAM6.6 A NTENNA 12VDC Home Theater Trigger In This 12VDC Trigger input is used to controlPower Management of the audio sources possiblybeing shared with a home theater system. Whenthe last zone on the CAM6.6 is turned off, 12VDCpresence to the trigger input will prevent thesources that are on fro...
42 12VDC Mute Trigger In When 12VDC is applied to the Mute Trigger In,the system will fully mute any source connectedto the Source Audio Input. The connections forthe trigger are made using a two-conductor cablewith 1/8” male mini-plug jacks. The tip is positive(+) and sleeve is negative (-). This a...
44 The CAM6.6 supports RS-232 communicationwith various third party automation systems orPC for programming of the controller. The RS-232 com port is located on the back of theCAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC application,see the Document Center atwww.rus...
45 INSTALLER MAKING CONNECTIONS Optional Internal Source - XM Tuner Antennas CAM6.6 XM Antenna Connect the included XM antenna for XM recep-tion to the back panel of the XM module. Theantenna comes with 20 feet of cable. If thislength is not sufficient, there are aftermarketantenna kits available fo...
46 Before proceeding to the system programming section, it’s important to conduct an initial test todetermine that the hardware components are working properly. 1. Connect the speaker wires from Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO-S1 or UNO-S2 keypad to Keypad ...
This manual includes items that are designed to assist in the programming process. Forms (Pages 49-51) Three blank reproducible forms are included as planning tools when determining sources, settingsand zone preferences. The Source and Zone Information forms and the Macro Editor form should becomple...
49 <XM> Russound N/A P e ripher al N/A N N/A N N/A N/A INSTALLER SETUP FORMS
52 INSTALLER INSTALLATION MENU OVERVIEW There are three item types in the installation menu: Menu Item (m) – Acts as a folder that holds procedures and/or feature parameters. Procedure (p) – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key. Once you begi...
53 The following items make up the Installation Menu: PERIPH SETUP (PerSu) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Peripheral Setup allows the CAM6.6’s optional internal source to be ...
INSTALLER INSTALLATION MENU 2. BANK NAME – Use the up/down keys to select a character and left/right keys (BnkNm) to change a character position. A blinking cursor indicates the placement of the character being entered. Names can be from 1 to 12 characters in length. CONTROLLR ID (CtlId) This proced...
55 1. BUILD TIME Displays the firmware Build Time of the tuner. (BTime) 2. BUILD DATE Displays the firmware Build Date of the tuner. (BDate) 3. VERSION Displays the firmware version of the tuner. (Ver) SOURCE SETUP (SrcSu) Source Setup allows the system’s sources to be configured. The following item...
58 INSTALLER INSTALLATION MENU 9. SAVE CHANGES? – Select “yes” to save changes. Procedure advances to ZONE NUM (Save?) (step 1) SOURCE NAMES (SrcNm) This procedure allows the installer to customize the source names for the sources attached to theCAM6.6. See Source Names/Vol Trim - Flow Chart page 71...
INSTALLER INSTALLATION MENU i. LEARNED SRC – Select the learned source bank to be assigned to the source (LnSrc) component. Procedure advances to KEY FUNCTION (step 12) b. Selected: Unassigned The numeric IR Suffix command is cleared. Procedure advances (Unasg) to SOURCE NUM (step 1) c. Selected: De...
62 INSTALLER INSTALLATION MENU disabled zone. If enabled, an All On command activated from another zone will turn on the enabled zone. 3. PARTY ENABLE - This feature is either disabled or enabled. If disabled, Party Mode (PtyEn) activation from another zone will not affect the disabled zone. If enab...
63 All sources that have power management enabled are initialized by a “POWER ON” command/ macro.Power management is initialized when the first keypad is turned on or when the home theater triggerinput has 12VDC present. The 12VDC trigger output is turned on when the first zone is turned on. All sou...
INSTALLER INSTALLATION MENU 6. POWER OFF CMD – Tells the controller to turn off the selected source equipment (by (OfCmd) SOURCE NUMBER) when the last of the UNO System Keypads is turned off. If “no,” procedure advances to SAVE CHANGES (step 10) 7. COMMAND TYPE – Select the type of source command (e...
65 2. KEY FUNCTION – Select the function to be learned or deleted. (KeyFn) 3. LEARN/DELETE – Select Learn IR Now or Delete IR. If Learn IR Now, a “USE (Ln/Dl) REMOTE” prompt appears. Point the learning remote at the controller’s IR window. If Delete IR, procedure returns to LEARNED SRC (step 1) 4. T...
66 b. Selected: Unassigned Selected command and subsequent commands are cleared. (Unasg) Procedure advances to COMMAND NUM (step 3) c. Selected: Default Default selects the same device type and device code previously (Deflt) setup in BASIC SETUP. Procedure advances to KEY FUNCTION (step 6) d. Select...
67 INSTALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK # BANK NAME SA VE CHANGES? Selects character Selects character position Repeat for each character in name BANK # MEMOR Y # MEMOR Y NAME Selects character Selects character position Repeat for each ch...
80 INSTALLER IR CODES Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0...
81 INSTALLER IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126Sharp 1010 Sony 0850 Device Codes for SAT/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869HTS 0775 Hitachi...
82 INSTALLER IR CODES Realistic 0203 Sony 0201, 0193 Technics 0204 Device Codes for DVD Players: Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796,0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522 Go Video 0715, 0783 Gradiente ...
83 INSTALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn C...
91 INSTALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down...
93 INSTALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Learned Only Channel Dn C...
95 INSTALLER KEY CODES DVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, Traack 1 2 2 Digit 2, Track 2 3 3 Digit 3, Track 3 4 4 Digit 4, Track 4 5 5 Digit 5, Track 5 6 6 Digit 6, Track 6 7 7 Digit 7, Track 7 8 8 Digit 8,Track 8 9 9 Digit 9, Track 9 0 0 Digit 0, Track 10 Volume Up VolUp Volume Up Volume Down ...
97 INSTALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Pres...
101 INSTALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 1 1 Digit 1, Track 1,Dsc1 2 2 Digit 2, Track 2,Dsc2 3 3 Digit 3, Track 3,Dsc3 4 4 Digit 4, Track 4,Dsc4 5 5 Digit 5, Track 5,Dsc5 6 6 Digit 6, Track 6,Dsc6 7 7 Digit 7, Track 7,Dsc7 8 8 Digit 8,Track 8,Dsc8 9 9 Digit 9, Track 9,Dsc9 0 0 Digit 0, Trck...
103 INSTALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channe...
105 INSTALLER SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Player CD 1 CD Player 1 CD 2 CD Player 2 CD 3 CD Player 3 Class Classical Compr Co...
107 CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 Blues Blues RCA C ables Blues Blues UNO-S1 UNO-S1 Bluesville UNO-S2 A NTENNA Blues UNO-S1 Sharing a single CAM6.6X (internal tuner) with multiplecontrollers This arrangement can support up to six CAM6.6 unitsfo...
CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 UNO-S1 UNO-S1 A NTENNA A NTENNA CNBC CNBC CNBC UNO-S2 UNO-S2 Sunny Sunny Sunny SAMPLE CONFIGURATIONS MULTIPLE CONTROLLERS WITH TWO TUNERS System with two CAM6.6X (internal tuner) controllers The configuration below...
109 RS-232 INTERFACE IR L R A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK KEYPAD PORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR L R A UDIO O UTPUT ST2-XM Tuner Back Panel A NTENNA CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel(Co...
110 RS-232 INTERFACE IR L R A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR L R A UDIO O UTPUT ST2-XM Tuner Back Panel A NTENNA CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel(...
111 TECHNICAL SPECIFICATIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS ...
Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388e-mail: [email protected] Copyright © 2004 Russound®. All rights reserved. 28-0112 10/07/04
Russound Manuals
-
Russound DPA-6.12
Manual
-
Russound SMS3
Manual
-
Russound R275HC
Manual
-
Russound LCR7
Manual
-
Russound OB-R6F
Manual
-
Russound CAM6.6T
Manual
-
Russound A-LRC1
Manual
-
Russound K2
Manual
-
Russound ST2-XM
Manual
-
Russound CA-Series
Manual
-
Russound VM1
Manual
-
Russound 4-Zone
Manual
-
Russound DPA-4.8
Manual
-
Russound CA6.4
Manual
-
Russound OB-R6G
Manual
-
Russound SS-4
Manual
-
Russound DPA-1.2
Manual
-
Russound CA-LCD.2
Manual
-
Russound CAS-RC
Manual
-
Russound CAM6.6T-S1
Manual