Page 2 - IMPORTANT SAFEGUARDS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit...
Page 3 - TABLE OF CONTENTS
TABLE OF CONTENTS USER SECTION Product Introduction ....................................................................................................................................................5 Component Guide CAV6.6 Controller (Front panel operation) ...........................................
Page 5 - PRODUCT INTRODUCTION; Thank you for choosing the Russound
5 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAV6.6 controller amplifier to enhance your home with distrib- uted audio and video. This controller’s state-of-the-art features and components blend seamlessly withyour unique lifestyle and preferences. Besides distributing and controllin...
Page 6 - USER; COMPONENT GUIDE
6 USER COMPONENT GUIDE CAV6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAV6.6. The power switch for theCAV6.6 controller is "on" in the up position. REMOVABLE COVER LENS - Covers the connections on the front of the CAV6.6 ROOM LED ON/OFF INDICATORS - Indicates when a ...
Page 8 - VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room; Command Keys
8 LCD PANEL - 12-character backlit display shows status of the room, source,volume, and more MODE - “SYS-ON” indicates system on, “DND” shows when Do Not Disturb is active,“SHARED” indicates same source selected in multiple rooms, “PARTY”shows whenParty Mode is enabled, and “MASTER” indicates the Ma...
Page 9 - PLUS - Adjust setting for selected source
9 USER COMPONENT GUIDE UNO-TS2 Touchscreen IR RECEIVER - Receives IR signals and passes them to the controller and source equipment. Also used when operating the touchscreen by using the SRC2 remote TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screencan be programmed to ...
Page 11 - SRC2 Remote Control
11 USER COMPONENT GUIDE SRC2 Remote Control POWER - Turns room or Local Source on andoff. RUSSOUND DEVICE BUTTON - Used forSRC2 control of zone keypad. NUMBER BUTTONS - Buttons (0-9) for directselection of channels or discs. VOLUME UP/DOWN - Raises and lowers thevolume for the room you are in, or fo...
Page 12 - OPERATION; UNO-S2 Keypad Button Functions
12 Room On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release to turn off the UNO System Keypad. Thi...
Page 14 - UNO-S1 Keypad Button Functions; The UNO-S1 keypad operates in a similar
14 USER OPERATION UNO-S1 Keypad Button Functions The UNO-S1 keypad operates in a similar manner as the UNO-S2 keypad. Room On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’s room, and any presets previ- ously assigned will be activated, includi...
Page 16 - UNO-TS2 Touchscreen Button Functions; System On Indicator
16 USER OPERATION UNO-TS2 Touchscreen Button Functions Room On/Off To turn on the room and the touchscreen, touchthe UNO-TS2 screen anywhere, or press andrelease the power button. Any presets previouslyassigned will be activated, including settings forbass, volume, last source selected, etc. Pressan...
Page 17 - Options screen; Options; Features screen; Stream 3; USER MENU SETTINGS; Sound Control screen
17 The Options button on the UNO-TS2 home screenbrings up room setting options and screen adjust-ments. (For more detailed information, consult theUNO-TS2 Instruction Manual) FeaturesTurn On Volume - This sets the room’s default vol-ume when the room is turned on.Party Mode - When in “PARTY MODE” th...
Page 18 - INSTALLER; GETTING STARTED; Tools needed for installation:
18 INSTALLER GETTING STARTED Unpacking the Components• Keep the original carton and packing materialsfor future shipment or storage. • Check for any visible signs of damage. Ifyou encounter any concealed damage, con-sult your Russound dealer before proceedingto install the unit. • Retain the sales r...
Page 19 - PROGRAM SELECTOR COVER - Protects the Program Selector Switch
INSTALLER COMPONENT GUIDE CAV6.6 Controller-Front Panel 1 7 2 5 8 3 6 9 10 11 4 PROGRAM SELECTOR COVER - Protects the Program Selector Switch KEYPAD PROGRAMMING PORT - Accepts an RJ-45 terminated UNO keypad for programming FRONT/REAR RS-232 SWITCH - Selects front or rear RS-232 connection for progra...
Page 20 - UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones
20 17 16 14 12 13 15 19 18 21 20 ZONE 12VDC TRIGGER OUT - 12VDC 50ma is available whenever the correspondingzone is turned on UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones 24VDC 2.5A INPUT - Provides power to the A-BUS READY SUB-ZONES when usedwith a 24VDC 2.5A power supply...
Page 22 - UNO Keypad-OS Update Port; OS Update Port
22 INSTALLER COMPONENT GUIDE UNO Keypad-OS Update Port 2 OS UPDATE PORT- Connection for programmingcable used to update UNO keypad OS software. SETUP BUTTON - Activates Installer Setup modeand accesses update menus RESET BUTTON - Resets UNO-TS2 after update OS UPDATE/RUN JUMPER - Pins are jumpereddu...
Page 23 - OS UPDATE JUMPER - Selects “Run” or “OS Update” mode; UNO Keypads-Rear Panel
KOR E A EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver OS UPDATE JUMPER - Selects “Run” or “OS Update” mode RESET BUTTON - (UNO-S2) Reset whenever changing from RUN to OS update (UNO-TS2) Reset after touchscreen firmware update 110 PUNCHDOWN CONNECTOR - Termination for CA...
Page 24 - WIRING INSTRUCTIONS; TYPE
24 INSTALLER WIRING INSTRUCTIONS RJ-45 ConnectionsThe CAT-5 T568A wiring stan-dard shown on the right is usedfor the RJ-45 terminations. Keypad WiringFor the UNO keypads, the following connectionsare used to terminate the CAT-5 wire to the 110punchdown on the keypad: CAT-5 WIRE COLOR TYPE Brown . . ...
Page 25 - UNO-S2 Keypad Connections; Punchdown Tool
25 CAT-5 ConnectionThe UNO-S2 Keypad uses a 110-punchdownterminal to provide a simple installation andstrong connection for CAT-5 cable’s eight con-ductors. Punchdown terminals require the use ofa punchdown tool which has been provided withthe keypad kit. Attach the CAT-5 cable to the110 punchdown t...
Page 26 - IR Receiver Connection
The UNO-S2 keypad has an External IR ReceiverIn terminal for connecting an external IR receiversuch as the Russound SaphIR 858, 862 Eye, or860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG-NAL) and the other pair connecting ST (STATUS)and V+ (+12VDC). If the wire...
Page 27 - Keypad Location; Keypad Installation; Back Plate
INSTALLER UNO-S2 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achievedwith the keypad away from any direct sunlight,plasma TV, and low voltage lighting controls. Alsoconsider convenience when choosing a location. Choose a place that is easily seen from the posi-tion wh...
Page 28 - MAKING CONNECTIONS
28 The UNO System Keypad Ports are located onthe back of the CAV6.6 in the top left corner.Connections made at the UNO Keypad Ports aremade using CAT-5 T568A RJ-45 wire configura-tion. CAT-5 is color-coded for ease of installa-tion. For a clean installation when wiring from anUNO System Keypad Port ...
Page 29 - plug to the IR emitter port below
29 The CAV6.6 supports up to six audio/videosources. The Source Inputs are located at theback panel. Connect each source output usingquality RCA signal cables. Connect the Video, andthe Left and Right Audio outputs from eachsource to the corresponding inputs on theCAV6.6 controller. Label each cable...
Page 41 - Technical Documents under RNET Systems.
41 The CAV6.6 supports RS-232 communicationwith various third-party automation systemsthrough the RS-232 ports. These ports are alsoused for firmware updates, and for controllerprogramming through the PC Power Tool soft-ware program. The two RS-232 com ports are located on thefront and the back of t...
Page 43 - If there is no sound, follow these diagnostic steps:; Check the source to see that it is operating properly.; INITIAL INSTALL TEST
43 Before proceeding to the system programming section, it’s important to conduct an initial test todetermine that the hardware components are working properly. 1. Connect the speaker wires from Zone #1 to the CAV6.6 Zone #1 speaker output connectors. 2. Connect an UNO keypad to Keypad Port #1 on th...
Page 44 - PROGRAMMING; System Programming Overview
This manual includes items that are designed to assist in the programming process. Sample Configurations (Pages 80-91)A series of sample configurations are provided to showcase a variety of system designs and compo-nent options. Forms (pages 46-48)Three blank reproducible forms are included as plann...
Page 46 - Source Information Form
Page 47 - Zone Information Form
Page 48 - Macro Editor Form
Page 49 - INSTALLATION MENU OVERVIEW; There are three item types in the installation menu:; Menu –; “Folder” that holds procedures and/or feature options.; Procedure –; The actual settings that will change the system configuration.; Button Function
49 INSTALLER INSTALLATION MENU OVERVIEW There are three item types in the installation menu: Menu – “Folder” that holds procedures and/or feature options. Procedure – A series of steps to perform a guided operation, such as configuring a button. Feature – The actual settings that will change the sys...
Page 50 - INSTALLATION MENU; See Basic Setup - Flow Chart on page 62
50 INSTALLER INSTALLATION MENU The following items make up the Installation Menu: SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) SOURCE SETUP (SrcSu) Source Setup allows the system’s sources to be configured. Th...
Page 53 - See Source Setup Menu on Page 50 and Source Names/Vol Trim - Flow
INSTALLER INSTALLATION MENU SOURCE NAMES (SrcNm) This procedure allows the installer to customize the source names for the sources attached tothe CAV6.6. See Source Setup Menu on Page 50 and Source Names/Vol Trim - Flow Chart on page 64 1. SOURCE NUM – Select the source number this name will be assi...
Page 55 - See Source Setup Menu on Page 50 and Source Select Command & # Of
55 INSTALLER INSTALLATION MENU Numeric IR (cont’d) i. MACRO - Macro loads a series of commands which are processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number. Menu advances to SAVE CHANGES (MacID) (step 13) e. All Other Selections: Procedure advances to DEVICE CODE (step 11) 11...
Page 56 - See Source Setup Menu on
56 INSTALLER INSTALLATION MENU Source Select Command (cont’d) e. All Other Selections: Procedure advances to DEVICE CODE (step 3) 3. DEVICE CODE – Source component code for IR control. (DevCd) 4. KEY FUNCTION – Select a function (Play, Enter, etc.). (KeyFn) 5. SAVE CHANGES? – Select “yes” to save th...
Page 57 - This feature is either disabled or enabled. It allows the option of; See Installation Menu on Page 50 and Controller Setup -; This defines the Controller ID for this system. The default is 1 but; WARNING: This procedure returns the controller to its
57 5. PAGE ENABLE - This feature is either disabled or enabled. It allows the option of (PagEn) receiving or blocking a page in a zone. If disabled, the page will not be sent to the zone. If enabled (default), the page will be sent to the zone. 6. PAGE VOLUME - This feature allows the installer to a...
Page 62 - SETUP MENU FLOW CHARTS; Source Setup: Basic Setup
62 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Basic Setup
Page 63 - Source Setup: Key Configuration
63 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Key Configuration
Page 65 - Source Setup: Numeric IR
65 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Numeric IR
Page 67 - Zone Setup
Page 68 - Controller Setup
68 INSTALLER SETUP MENU FLOW CHARTS Controller Setup
Page 69 - Power Management
69 INSTALLER SETUP MENU FLOW CHARTS Power Management
Page 70 - Learn IR
Page 71 - Macro Editor
Page 72 - System Info
Page 73 - KEYPAD DIAGNOSTIC MENU; menus are outlined in the diagram below.
73 INSTALLER KEYPAD DIAGNOSTIC MENU UNO Keypad Diagnostics Menu The Diagnostics Menu allows the installer to runa diagnostic check on the keypad and to verifythe firmware version. The Diagnostics Menu alsocontains the update firmware procedure forupdating the UNO-S1 and UNO-S2’s firmware. To access ...
Page 74 - IR DEVICE CODES; Device Codes for TVs:
74 INSTALLER IR DEVICE CODES Device Codes for TVs: Admiral 0093, 0463 Advent 0761, 0842 Aiko 0092 Akai 0030, 0672, 0702, 0812 Albatron 0700, 0843 America Action 0180 Anam 0180 AOC 0030 Apex Digital 0748, 0765, 0767, 0879, 1943 Audiovox 0451, 0180, 0092, 0623 Bell & Howell 0154 BenQ 1032 Bradford...
Page 78 - SOURCE NAMES
78 SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Player CD 1 CD Player 1 CD 2 CD Player 2 CD 3 CD Player 3 Class Classical Compr Computer Cntr...
Page 80 - SAMPLE SYSTEM CONFIGURATION 1; Six Zones and Six Sources; - pair Advantage Twist & TiltTM Speakers
80 The configuration shows how the CAV6.6 distrib-utes audio/video throughout the house using sixUNO System Keypads and six audio/videosource components. Source ComponentsThe configuration allows for any zone to selectany one of the six source inputs. KeypadsThe configuration uses a single UNO-S2 Ke...
Page 82 - SAMPLE SYSTEM CONFIGURATION 2; Integrate Multiple CAV6.6’s
82 This configuration uses an additional CAV6.6 toadd six additional amplified zones, controlledthrough UNO-S2 Keypads. The source compo-nents are connected to both CAV6.6s with RCAcables using the source in/loop out to intercon-nect the audio/video signals. RNET Link In and Link OutMultiple CAV6.6s...
Page 84 - SAMPLE SYSTEM CONFIGURATION 3; Zone Keypad Expansion
84 This configuration uses a SA-ZX3 KeypadSplitter hub to connect up to three UNO-S2 key-pads to one CAV6.6 UNO keypad port. For cleaninstallations, use RJ-45 CAT-5 patch cables withthe T568A configuration. To connect from the SA-ZX3 to an RJ-45 wallplate (optional), use the patch cables to wire for...
Page 86 - SAMPLE SYSTEM CONFIGURATION 4; Surface Mount Hub
86 Adding A-BUS allows sub-zoning of the audio dis-tribution of the CAV6.6 system. This configura-tion demonstrates sub-zoning of the first zonethrough the use of an A-BUS expansion hub.Only the first four (1-4) CAV6.6 zones can beexpanded using the same numbered (1-4) A-BUSReady Sub-Zone ports. Pow...
Page 88 - SAMPLE SYSTEM CONFIGURATION 5; Additional Amplification
88 Additional amplification can be added to the CAV6.6when more power or more speakers are desired. This configuration adds an external amplifier tothe CAV6.6. The Zone Audio (To Amp) Outputsare variably controlled by the associated UNO-S2 keypad and can be connected to an externalamplifier. The fig...
Page 90 - SAMPLE SYSTEM CONFIGURATION 6; Home Theater
90 Home Theater systems can share sources witha CAV6.6 Controller to provide additional listen-ing and viewing options. In this configuration,the Home Theater Receiver provides a 12VDCsignal to the CAV6.6 at the Home Theater12VDC In Port. The 12VDC signal tells the con-troller to leave any shared ho...
Page 92 - KEY FUNCTION
INSTALLER KEY CODESTV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Chann...
Page 93 - KEY CODES
93 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Off, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/...
Page 100 - KEY FUNCTION UNO-S1 VCR
100 INSTALLER KEY CODESVCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down...
Page 102 - KEY FUNCTION UNO-S1 LASER DISC
102 INSTALLER KEY CODESLASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Learned Only Channel Dn C...
Page 104 - KEY FUNCTION UNO-S1 DVD
104 INSTALLER KEY CODESDVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, Traack 1 2 2 Digit 2, Track 2 3 3 Digit 3, Track 3 4 4 Digit 4, Track 4 5 5 Digit 5, Track 5 6 6 Digit 6, Track 6 7 7 Digit 7, Track 7 8 8 Digit 8,Track 8 9 9 Digit 9, Track 9 0 0 Digit 0, Track 10 Volume Up VolUp Volume Up Volume Down ...
Page 106 - KEY FUNCTION UNO-S1 RECEIVER
106 INSTALLER KEY CODESRECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Pres...
Page 110 - KEY FUNCTION UNO-S1 CD
110 INSTALLER KEY CODESCD KEY FUNCTION UNO-S1 CD 1 1 Digit 1, Track 1,Dsc1 2 2 Digit 2, Track 2,Dsc2 3 3 Digit 3, Track 3,Dsc3 4 4 Digit 4, Track 4,Dsc4 5 5 Digit 5, Track 5,Dsc5 6 6 Digit 6, Track 6,Dsc6 7 7 Digit 7, Track 7,Dsc7 8 8 Digit 8,Track 8,Dsc8 9 9 Digit 9, Track 9,Dsc9 0 0 Digit 0, Trck1...
Page 112 - KEY FUNCTION UNO-S1 HOME CONTROL
112 INSTALLER KEY CODESHOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channel...
Page 114 - TECHNICAL SPECIFICATION
114 TECHNICAL SPECIFICATION CAV6.6 Controller/Amplifier Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; F1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 0.5dB Wat...
Page 116 - Audio-Video Controller Amplifier; INSTRUCTION MANUAL
CAV6.6 Six-Zone, Six-Source Audio-Video Controller Amplifier INSTRUCTION MANUAL Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388 e-mail: [email protected] Copyright ©2006 Russound ® All rights reserved. All trademarks are property of their respective owne...