Page 2 - IMPORTANT SAFEGUARDS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit...
Page 3 - TABLE OF CONTENTS
TABLE OF CONTENTS 3 USER SECTION Product Introduction ....................................................................................................................................................6 Component Guide CAV6.6 Controller .................................................................
Page 5 - Component Guides
USER SECTION Component Guides Explains front panel features of the CAV6.6 controller, UNO-S2 keypad, optional UNO-S1 keypad and UNO-LRC1 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu. 5
Page 6 - PRODUCT INTRODUCTION; Thank you for choosing the Russound
6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAV6.6-S2 System to enhance your home with distributed audio and video. This system’s state-of-the-art features and components blend seamlessly with yourunique lifestyle and preferences. Besides distributing and controlling six A/V sources...
Page 7 - USER; COMPONENT GUIDE; MAIN POWER SWITCH - Supplies power to the CAV6.6
7 USER COMPONENT GUIDE CAV6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAV6.6 REMOVABLE COVER LENS - Covers the connections on the front of the CAV6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) ROOM LABEL WINDOW - Holds the selected room Lab...
Page 9 - VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room
9 LCD PANEL - 12-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAV6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volu...
Page 11 - UNO-LRC1 Remote Control
11 USER COMPONENT GUIDE UNO-LRC1 Remote Control LOCAL DEVICE BUTTONS - Select localsource to be controlled by UNO-LRC1. SETUP - Use for programming UNO-LRC1 usingthe built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNOKeypad for control by UNO-LRC1. ROOM ON/OFF - Turns room on a...
Page 12 - OPERATION; 2-character display
Main Power and Zone StatusThe power switch for the CAV6.6 controller is"on" in the up position. Any active room is indi-cated on the front of the controller by a greenbacklit label, which shows red when the room isinactive. In most basic installations, all functionsand room settings are cont...
Page 13 - UNO-S2 Keypad Button Functions
13 Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release to turn off the UNO System Keypad. Thi...
Page 15 - Optional UNO-S1 Keypad Button Functions; The optional UNO-S1 keypad operates in a
15 USER OPERATION Optional UNO-S1 Keypad Button Functions The optional UNO-S1 keypad operates in a similar manner as the UNO-S2 keypad. Zone On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be ...
Page 16 - Optional UNO-S1 User Menu - Setting Preferences
16 USER OPERATION Optional UNO-S1 User Menu - Setting Preferences The UNO-S1 User Menu allows the user toadjust the audio properties and control func-tions of a particular room. To enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make c...
Page 17 - INSTALLER SECTION; Explains UNO-S2 keypad installation and wiring.
17 INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and wiring instructions. Component Guides Reviews front and back panel features of the CAV6.6 controller and the UNO-S2 keypad. Keypad Installation Explains UNO-S2 keypad installation and wiring. Making Co...
Page 18 - INSTALLER; GETTING STARTED; Tools needed for installation:
18 INSTALLER GETTING STARTED Unpacking the System Components• Keep the original carton and packing materialsfor future shipment or storage. • Check for any visible signs of damage. Ifyou encounter any concealed damage, con-sult your Russound dealer before proceedingto install the unit. • Retain the ...
Page 19 - WIRING INSTRUCTIONS; TYPE
19 INSTALLER WIRING INSTRUCTIONS RJ-45 ConnectionsThe CAT-5 T568A wiring stan-dard shown on the right is usedfor the RJ-45 terminations. Keypad WiringFor the UNO keypad, the following connectionsare used to terminate the CAT-5 wire to the 110punchdown on the keypad: CAT-5 WIRE COLOR TYPE Brown . . ....
Page 21 - PROGRAM SELECTOR COVER - Protects the Program Selector Switch
21 INSTALLER COMPONENT GUIDE CAV6.6 Controller-Front Panel PROGRAM SELECTOR COVER - Protects the Program Selector Switch KEYPAD PROGRAMMING PORT - Accepts an RJ-45 terminated UNO keypad to program certain features of the CAV6.6 FRONT/REAR RS-232 SWITCH - Selects front or rear RS-232 connection for o...
Page 22 - UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones
22 17 16 14 12 13 15 19 18 21 20 ZONE 12VDC TRIGGER OUT - 12VDC 50ma is available whenever the correspondingzone is turned on UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones 24VDC 2.5A INPUT - Provides power to the A-BUS READY SUB-ZONES when usedwith a 24VDC 2.5A power supply...
Page 24 - SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad; GND
24 INSTALLER COMPONENT GUIDE UNO-S2 Keypad-Front Panel SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDATE PORT - Port used for UNO keypad OS software updates 1 2 1 2 DATA Rx (RS-232) DATA Tx (RS-232) GND N/C +12VDC
Page 26 - Keypad Location; Keypad Installation; Back Plate
26 INSTALLER UNO-S2 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achievedwith the keypad away from any direct sunlight,plasma TV, and low voltage lighting controls. Alsoconsider convenience when choosing a location. Choose a place that is easily seen from the posi-tion...
Page 27 - UNO-S2 Keypad Connections; Punchdown Tool
27 CAT-5 ConnectionThe UNO-S2 Keypad uses a 110-punchdownterminal to provide a simple installation andstrong connection for CAT-5 cable’s eight con-ductors. Punchdown terminals require the use ofa punchdown tool which has been provided withthe keypad kit. Attach the CAT-5 cable to the110-punchdown t...
Page 28 - IR Receiver Connection
28 The UNO-S2 keypad has an External IR ReceiverIn terminal for connecting an external IR receiversuch as the Russound SaphIR 858, 862 Eye, or860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG-NAL) and the other pair connecting ST (STATUS)and V+ (+12VDC). If the w...
Page 29 - MAKING CONNECTIONS
29 The UNO System Keypad Ports are located onthe back of the CAV6.6 in the top left corner.Connections made at the UNO Keypad Ports aremade using CAT-5 T568A RJ-45 wire configura-tion. CAT-5 is color-coded for ease of installa-tion. For a clean installation when wiring from anUNO System Keypad Port ...
Page 30 - plug to the IR emitter port below
30 The CAV6.6 supports up to six audio/videosources. The Source Inputs are located at theback panel. Connect each source output usingquality RCA signal cables. Connect the Video, andthe Left and Right Audio outputs from eachsource to the corresponding inputs on theCAV6.6 controller. Label each cable...
Page 44 - FIRMWARE UPDATES; menus are outlined in the diagram below.
44 INSTALLER FIRMWARE UPDATES UNO-S2 Keypad Diagnostics Menu The Diagnostics Menu allows the installer to runa diagnostic check on the keypad and to verifythe firmware version. The Diagnostics Menu alsocontains the update firmware procedure forupdating the UNO-S2’s firmware. To access the Diagnostic...
Page 47 - PC POWER TOOL OVERVIEW; PC Power Tool Start Screen
47 The PC Power Tool is a custom software pro-gram that provides an easy way to program theCAV6.6 using a PC to upload the program set-tings to the controller via a serial cable. System requirements for PC Power Tool:1. PC computer running Windows 98, ME, 2000, XP2. Minimum 6MB free hard disk space3...
Page 48 - If there is no sound, follow these diagnostic steps:; Check the source to see that it is operating properly.; INITIAL INSTALL TEST
48 Before proceeding to the system programming section, it’s important to conduct an initial test todetermine that the hardware components are working properly. 1. Connect the speaker wires from Zone #1 to the CAV6.6 Zone #1 speaker output connectors. 2. Connect an UNO-S2 keypad to Keypad Port #1 on...
Page 49 - PROGRAMMING; System Programming Overview
49 This manual includes items that are designed to assist in the programming process. Sample Configurations (Pages 84-95)A series of sample configurations are provided to showcase a variety of system designs and compo-nent options. Forms (pages 51-53)Three blank reproducible forms are included as pl...
Page 51 - Source Information Form
Page 52 - Zone Information Form
Page 53 - Macro Editor Form
Page 54 - INSTALLATION MENU; There are three item types in the installation menu:; Menu Item –; Acts as a folder that holds procedures and/or feature parameters.; Procedure –
54 INSTALLER INSTALLATION MENU There are three item types in the installation menu: Menu Item – Acts as a folder that holds procedures and/or feature parameters. Procedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key. Once you begin a procedure, th...
Page 55 - See Basic Setup - Flow Chart on page 67
55 INSTALLER INSTALLATION MENU The following items make up the Installation Menu: SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) SOURCE SETUP (SrcSu) Source Setup allows the system’s sources to be configured. Th...
Page 58 - See Source Setup Menu on Page 55 and Source Names/Vol Trim - Flow
58 INSTALLER INSTALLATION MENU SOURCE NAMES (SrcNm) This procedure allows the installer to customize the source names for the sources attached tothe CAV6.6. See Source Setup Menu on Page 55 and Source Names/Vol Trim - Flow Chart on page 69 1. SOURCE NUM – Select the source number this name will be a...
Page 60 - See Source Setup Menu on Page 55 and Source Select Command & # Of
60 INSTALLER INSTALLATION MENU Numeric IR (cont’d) i. MACRO - Macro loads a series of commands which are processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number. Menu advances to SAVE CHANGES (MacID) (step 13) e. All Other Selections: Procedure advances to DEVICE CODE (step 11) 11...
Page 61 - See Source Setup Menu on
61 INSTALLER INSTALLATION MENU Source Select Command (cont’d) e. All Other Selections: Procedure advances to DEVICE CODE (step 3) 3. DEVICE CODE – Source component code for IR control. (DevCd) 4. KEY FUNCTION – Select a function (Play, Enter, etc.). (KeyFn) 5. SAVE CHANGES? – Select “yes” to save th...
Page 62 - This feature is either disabled or enabled. It allows the option of; See Installation Menu on Page 55 and Controller Setup -; This defines the Controller ID for this system. The default is 1 but; WARNING: This procedure returns the controller to its
62 5. PAGE ENABLE - This feature is either disabled or enabled. It allows the option of (PagEn) receiving or blocking a page in a zone. If disabled, the page will not be sent to the zone. If enabled (default), the page will be sent to the zone. 6. PAGE VOLUME - This feature allows the installer to a...
Page 67 - SETUP MENU FLOW CHARTS; Source Setup: Basic Setup
67 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Basic Setup
Page 68 - Source Setup: Key Configuration
68 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Key Configuration
Page 70 - Source Setup: Numeric IR
70 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Numeric IR
Page 72 - Zone Setup
Page 73 - Controller Setup
73 INSTALLER SETUP MENU FLOW CHARTS Controller Setup
Page 74 - Power Management
74 INSTALLER SETUP MENU FLOW CHARTS Power Management
Page 75 - Learn IR
Page 76 - Macro Editor
Page 77 - System Info
Page 78 - List of Source Names available for assignment.
78 REFERENCE SECTION IR Device Codes List of controller’s IR device code library for source Device Code entries. Source Names List List of Source Names available for assignment. Sample Configurations Diagrams of various configurations using the CAV6.6, UNO-S2 keypads, A-BUS components, andother Russ...
Page 79 - IR CODES; Device Codes for TVs:
79 IR CODES Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockw...
Page 80 - Device Codes for VCRs:
80 IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126Sharp 1010 Sony 0850 Device Codes for SAT/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869HTS 0775 Hitachi 0819 Hugh...
Page 81 - Device Codes for DVD Players:
81 IR CODES Realistic 0203 Sony 0201, 0193 Technics 0204 Device Codes for DVD Players: Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796,0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522 Go Video 0715, 0783 Gradiente 0651 Harma...
Page 82 - SOURCE NAMES
82 SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Player CD 1 CD Player 1 CD 2 CD Player 2 CD 3 CD Player 3 Class Classical Compr Computer Cntr...
Page 84 - SAMPLE SYSTEM CONFIGURATION 1; Six Zones and Six Sources; - pair Advantage Twist & TiltTM Speakers
84 The configuration shows how the CAV6.6 distrib-utes audio/video throughout the house using sixUNO System Keypads and six audio/videosource components. Source ComponentsThe configuration allows for any zone to selectany one of the six source inputs. KeypadsThe configuration uses a single UNO-S2 Ke...
Page 86 - SAMPLE SYSTEM CONFIGURATION 2; Integrate Multiple CAV6.6’s
86 This configuration uses an additional CAV6.6 toadd six additional amplified zones, controlledthrough UNO-S2 Keypads. The source compo-nents are connected to both CAV6.6s with RCAcables using the source in/loop out to intercon-nect the audio/video signals. RNET Link In and Link OutMultiple CAV6.6s...
Page 88 - SAMPLE SYSTEM CONFIGURATION 3; Zone Keypad Expansion
88 This configuration uses a SA-ZX3 KeypadSplitter hub to connect up to three UNO-S2 key-pads to one CAV6.6 UNO keypad port. For cleaninstallations, use RJ-45 CAT-5 patch cables withthe T568A configuration. To connect from the SA-ZX3 to an RJ-45 wallplate (optional), use the patch cables to wire for...
Page 90 - SAMPLE SYSTEM CONFIGURATION 4; Surface Mount Hub
90 Adding A-BUS allows sub-zoning of the audio dis-tribution of the CAV6.6 system. This configura-tion demonstrates sub-zoning of the first zonethrough the use of an A-BUS expansion hub.Only the first four (1-4) CAV6.6 zones can beexpanded using the same numbered (1-4) A-BUSReady Sub-Zone ports. Pow...
Page 92 - SAMPLE SYSTEM CONFIGURATION 5; Additional Amplification
92 Additional amplification can be added to the CAV6.6when more power or more speakers are desired. This configuration adds an external amplifier tothe CAV6.6. The Zone Audio (To Amp) Outputsare variably controlled by the associated UNO-S2 keypad and can be connected to an externalamplifier. The fig...
Page 94 - SAMPLE SYSTEM CONFIGURATION 6; Home Theater
94 Home Theater systems can share sources witha CAV6.6 Controller to provide additional listen-ing and viewing options. In this configuration,the Home Theater Receiver provides a 12VDCsignal to the CAV6.6 at the Home Theater12VDC In Port. The 12VDC signal tells the con-troller to leave any shared ho...
Page 96 - KEY FUNCTION
96 INSTALLER KEY CODESTV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Ch...
Page 97 - KEY CODES
97 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Off, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/...
Page 104 - KEY FUNCTION UNO-S1 VCR
104 INSTALLER KEY CODESVCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down...
Page 106 - KEY FUNCTION UNO-S1 LASER DISC
106 INSTALLER KEY CODESLASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Learned Only Channel Dn C...
Page 108 - KEY FUNCTION UNO-S1 DVD
108 INSTALLER KEY CODESDVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, Traack 1 2 2 Digit 2, Track 2 3 3 Digit 3, Track 3 4 4 Digit 4, Track 4 5 5 Digit 5, Track 5 6 6 Digit 6, Track 6 7 7 Digit 7, Track 7 8 8 Digit 8,Track 8 9 9 Digit 9, Track 9 0 0 Digit 0, Track 10 Volume Up VolUp Volume Up Volume Down ...
Page 110 - KEY FUNCTION UNO-S1 RECEIVER
110 INSTALLER KEY CODESRECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Pres...
Page 114 - KEY FUNCTION UNO-S1 CD
114 INSTALLER KEY CODESCD KEY FUNCTION UNO-S1 CD 1 1 Digit 1, Track 1,Dsc1 2 2 Digit 2, Track 2,Dsc2 3 3 Digit 3, Track 3,Dsc3 4 4 Digit 4, Track 4,Dsc4 5 5 Digit 5, Track 5,Dsc5 6 6 Digit 6, Track 6,Dsc6 7 7 Digit 7, Track 7,Dsc7 8 8 Digit 8,Track 8,Dsc8 9 9 Digit 9, Track 9,Dsc9 0 0 Digit 0, Trck1...
Page 116 - KEY FUNCTION UNO-S1 HOME CONTROL
116 INSTALLER KEY CODESHOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channel...
Page 118 - TECHNICAL SPECIFICATION
118 TECHNICAL SPECIFICATION CAV6.6 Controller/Amplifier Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; F1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 0.5dB Wat...
Page 120 - Copyright © 2004 Russound®. All rights reserved.
Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388e-mail: [email protected] Copyright © 2004 Russound®. All rights reserved. 11/12/04 Rev. 3 28-1143