Russound CAM6.6 - Manuals
Russound CAM6.6 – Manual in PDF format online.
Manuals:
Manual Russound CAM6.6
Summary
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit...
TABLE OF CONTENTS 3 USER SECTION Product Introduction ............................................................................................................................5Component Guide CAM6.6 Controller ..........................................................................................
TABLE OF CONTENTS Speaker Connections ........................................................................................................................36Zone Fixed/Variable Audio Output ......................................................................................................3712V...
5 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6 multisource, multizone controller to enhance your home with distributed audio. This controller’s state-of-the-art features and components blend seam-lessly with your unique lifestyle and preferences. Besides distributing and control...
6 USER COMPONENT GUIDE CAM6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) 1 2 2 1 Main Power and Zone StatusThe power switch for the CAM6.6 controller is “on” in the up position. Any activeroom ...
7 USER COMPONENT GUIDE UNO-S1 Keypad LCD PANEL - 5-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BU...
8 CD PLAYER 1 LCD PANEL - 12-character backlit display shows status of the room, source,volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to theCAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and low...
9 USER COMPONENT GUIDE UNO-TS2 Touchscreen IR RECEIVER - Receives IR signals and passes them to the controller and source equip-ment. Also used when operating the touchscreen by using the SRC2 remote TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screencan be programmed to...
10 USER COMPONENT GUIDE SRC2 Remote Control 1 4 4 7 7 2 5 8 3 3 6 9 11 10 6 9 1 2 5 8 10 11 POWER - Turns room or Local Source on andoff. RUSSOUND DEVICE BUTTON - Used forSRC2 control of zone keypad. NUMBER BUTTONS - Buttons (0-9) for directselection of channels or discs. VOLUME UP/DOWN - Raises and...
11 Room On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and release to turn off the UNO System Keypad. Thi...
12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. To enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes whileusing t...
13 USER OPERATION UNO-S2 Keypad Button Function Room On/Off Press and release to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’s room, and any presets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. Press and r...
The User Menu allows the user to adjust theaudio properties and control functions of a par-ticular room. The following keys are used to navigate andmake changes while using the User Menu: To enter the User Menu, press and hold during normal operation. To exit the User Menu, press and release . Adjus...
USER OPERATION UNO-TS2 Touchscreen Button Function Room On/Off To turn on the room and the touchscreen, touchthe UNO-TS2 screen anywhere, or press andrelease the power button. Any presets previouslyassigned will be activated, including settings forbass, volume, last source selected, etc. Pressand re...
The Options button on the home screen brings uproom setting options and screen adjustments. (Formore detailed information, consult the UNO-TS2Instruction Manual) FeaturesTurn On Volume - This sets the room’s default vol-ume when the room is turned on.Party Mode - When in “PARTY MODE” the system ispr...
17 USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Control UNO-S1 Keypad Control of Tuner Selecting the tuner On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’s preas- signed source number (1). Selecting the desired frequency Press and hold or to activate manual tuning. O...
18 USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control UNO-S2 Keypad Control of Tuner Selecting the tuner On the UNO-S2 keypad, press to select the AM/FM tuner by choosing the tuner’s preas- signed source number (1). Selecting the desired band Push to toggle between AM band and FM band receptio...
19 92.5 MHz FM TUNER SELECTION - Select source number assigned to AM/FM TUNER (1) TUNE UP/DOWN - Used for manual station selection SELECT - Selects AM or FM band SEEK - (press) Seeks next higher tuned station SCAN - (press and hold) Scans through tuned sta-tions with 5-second preview before next sta...
20 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 Touchscreen Control UNO-TS2 Control of Tuner Selecting the tunerOn the UNO-TS2 touchscreen home page, pressthe named source button to select the AM/FMtuner. Selecting a BankFrom the “1 of 3” tuner screen, select the bankby scrolling using the forward/bac...
21 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 Touchscreen Control 1 of 3 Tuner 1 Dad’s Music WBZ 1030 102.5 Class WEEI 850 107.1 MHz FM 89.7 NHPR 105.7 Oldies Banks and Memory Presets Example of Bank and Preset screen forRussound Tuner 107.1 MHz FM AM/FM Tuner Advanced Features 3 of 3 Example of AM/...
23 USER INTERNAL SOURCE - AM/FM TUNER SRC2 Remote Control POWER - Power managed by CAM6.6 NUMERIC INPUT - (press) Number buttons fordirect input of frequency MEMORY PRESETS - (press and hold) Numberbuttons (1-6) for saving memory presets TUNE UP/DOWN - Incrementally scrolls throughchannels or tuned ...
INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and connection tips. Component Guides Reviews front and back panel features of the CAM6.6 controller and the UNO keypads. Keypad Installation Explains UNO keypad installation and wiring. Making Connections De...
25 INSTALLER GETTING STARTED Unpacking the System Components • Keep the original carton and packing materialsfor future shipment or storage. • Check for any visible signs of damage. Ifyou encounter any concealed damage, con-sult your Russound dealer before proceedingto install the unit. • Retain the...
27 OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/FMradio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cord connectionfor the CAM6.6 FUSE HOLDER - Holds a replaceable fuse f...
28 INSTALLER COMPONENT GUIDE UNO Keypad Update Port 2 OS UPDATE PORT- Connection for programmingcable used to update UNO keypad OS software. SETUP BUTTON - Activates Installer Setup modeand accesses update menus RESET BUTTON - Resets UNO-TS2 after update OS UPDATE/RUN JUMPER - Pins are jumpereddurin...
UNO-S2 UNO-S1 KOR E A EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver OS UPDATE JUMPER - Selects mode “Run” (one pin covered) or “OS Update” (two pins covered).Jumper setting must be in “Run” position for keypad operation. RESET BUTTON - (UNO-S2) Reset whenever changing fr...
30 Wire Length To determine the amount of CAT-5 wire requiredfor the system installation, first decide howmany keypads will be used, then determine thedistance between each intended keypad locationto the intended CAM6.6 location. The maximumrecommended wire run length is 250 feet foreach UNO keypad....
The UNO-S2 keypad has an External IR ReceiverIN terminal for connecting an external IR receiv-er such as the Russound SaphIR 858, 862 Eye,or 860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG-NAL) and the other pair connecting ST (STATUS)and V+ (+12VDC). If the wi...
32 INSTALLER UNO KEYPAD INSTALLATION Keypad Location The best infrared remote performance is achievedwith the keypad away from any direct sunlight,plasma TV, and low voltage lighting controls. Alsoconsider convenience when choosing a location. Choose a place that is easily seen from the posi-tion wh...
33 CAM6.6 CAT-5 Cable CAT-5 Cable PM Mod 3Dwith RJ-45 CAT-5 Cable SA-ZX3 1201A/1A Power Supply CAM6.6T The UNO System Keypad Ports are located onthe back of the CAM6.6 in the top left of center.Connections made at the UNO Keypad Ports aremade using CAT-5 T568A RJ-45 wire configura-tion. CAT-5 is col...
INSTALLER MAKING CONNECTIONS Common IR Connection Common IR ConnectionsThe Common IR jack on the rear of the CAM6.6allows control of any source equipment withoutthat source being selected on the keypad. Theconnection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound 845...
39 12VDC Mute Trigger InWhen 12VDC is applied to the Mute Trigger In,the system will fully mute any source that is con-nected to the Source Audio Input. The connec-tions for the trigger are made using a two-con-ductor cable with 1/8” male mini-plug jacks. Thetip is positive (+) and sleeve is negativ...
41 The CAM6.6 supports RS-232 communicationwith various third party automation systems orPC for programming of the controller. The RS-232 com port is located on the back ofthe CAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC applica-tion, go to www.russound.com, Documen...
42 INSTALLER MAKING CONNECTIONS Optional Internal Source - AM/FM Tuner Antennas AM Antenna Connect the included loop antenna for AM recep-tion to the Optional Internal Source panel, attach-ing the GND (ground) and AM ends to the appro-priately marked connections. FM Antenna Attach the included FM an...
44 Grounding an Outdoor Antenna If the tuner is used with an outdoor antenna, theantenna must be grounded against staticcharges and voltage surges. Consult the instruc-tions that came with the antenna or contact theantenna manufacturer for proper installationinstructions. The diagram above gives a g...
45 Before proceeding to the system programming section, it’s important to conduct an initial test todetermine that the hardware components are working properly. 1. Connect the speaker wires from Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO keypad to Keypad Port #3 on th...
46 This manual includes items that are designed to assist in the programming process. Forms (Pages 106-108)Three blank reproducible forms are included as planning tools when determining sources, settingsand zone preferences. The Source and Zone Information forms and the Macro Editor form should beco...
48 There are three item types in the installation menu: Menu – “ Folder” that holds procedures and/or feature options. Procedure – A series of steps to perform a guided operation, such as configuring a button. Feature – The actual settings that will change the system configuration. The following UNO...
49 The following items make up the Installation Menu: PERIPH SETUP ( P e r Su) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Note: For CAM6.6, Peripheral Setup is not applicable. “ N No ot ...
INSTALLER INSTALLATION MENU 2. BANK NAME – Use the volume up/down keys to select a character and left/right (BnkNm) keys to change a character position. A blinking cursor indicates placement of the character being entered. Names can be from 1 to 5 characters in length. If adding names from 6-12 char...
51 INSTALLER INSTALLATION MENU SYSTEM INFO (SInfo) System Info shows the tuner’s manufacturing build properties. See Periph Setup - Flow Chart on page 65 BUILD TIME (BTime) BUILD DATE (BDate) VERSION (Ver) 1. BUILD TIME Displays the firmware Build Time of the tuner. (BTime) 2. BUILD DATE Displays th...
INSTALLER INSTALLATION MENU i. MACRO - Macro loads a series of commands which are processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number. Menu advances to SAVE CHANGES (MacID) (step 9) e. All Other Selections: Procedure advances to DEVICE CODE (step 7) 7. DEVICE CODE – Enter sour...
INSTALLER INSTALLATION MENU 9. SUFFIX CMD – Tells the system whether a command will be issued after the (Sufix) selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce- dure advances to SAVE CHANGES (step 13) 10. COMMAND TYPE – Select the type of source command (e.g., CD, TV, etc.). (Cmd...
57 INSTALLER INSTALLATION MENU 2. COMMAND TYPE – Select the type of source command (e.g., CD, TV, etc.). (CmdTp) a. Selected: Learned IR Choose Learned IR if the pre-programmed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assign...
58 INSTALLER INSTALLATION MENU ZONE SETUP (ZonSu) NOTE: This procedure should be performed using the keypad installed in the zone to be configured.See Zone Setup - Flow Chart on page 71 Zone Setup allows the installer to adjust properties of the UNO Keypad controlled CAM6.6 zone. Thisseries of menus...
59 INSTALLER INSTALLATION MENU 2. FACTORY INIT WARNING: This procedure returns the controller to its (FInit) original settings - use with discretion. Factory Initialization allows the installer to erase all programmed settings and returns the settings to the factory default settings. All settings in...
61 e. All Other Selections: Procedure advances to DEVICE CODE (step 8) 8. DEVICE CODE – Source component code for IR control. (DevCd) 9. KEY FUNCTION (f) – Select Keypad function. (KeyFn) 10. SAVE CHANGES? (f) – Select “yes” to save the changes. (Save?) LEARN IR (LrnIR) This procedure allows IR comm...
62 MACRO EDITOR (MacEd) This procedure is used to create a sequence of commands that are launched with one key touch orother event. Up to 132 macros can be created for the system, and each macro can contain up to 10commands including other macros and delays. See Macro Editor - Flow Chart on page 75 ...
77 INSTALLER KEYPAD DIAGNOSTIC MENU UNO Keypad Diagnostics Menu The Diagnostics Menu allows the installer to runa diagnostic check on the keypad and to verifythe firmware version. The Diagnostics Menu alsocontains the update firmware procedure forupdating the UNO-S1 and UNO-S2’s firmware. To access ...
78 INSTALLER IR DEVICE CODES Device Codes for TVs: Admiral 0093, 0463 Advent 0761, 0842 Aiko 0092 Akai 0030, 0672, 0702, 0812 Albatron 0700, 0843 America Action 0180 Anam 0180 AOC 0030 Apex Digital 0748, 0765, 0767, 0879, 1943 Audiovox 0451, 0180, 0092, 0623 Bell & Howell 0154 BenQ 1032 Bradford...
80 INSTALLER IR DEVICE CODES Device Codes for VCRs: (cont’d) Pulsar 0039 Quasar 0035, 0162 Radio Shack 0000 Radix 0037 Randex 0037 RCA 0060, 0240, 0042, 0149, 0880 Realistic 0035, 0037, 0048, 0047, 0000,0104 ReplayTV 0616 Runco 0039 Samsung 0045, 0240 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 0041, ...
82 INSTALLER KEY CODESTV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Ch...
83 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Off, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/...
90 INSTALLER KEY CODESVCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down ...
92 INSTALLER KEY CODESLASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Learned Only Channel Dn Ch...
94 INSTALLER KEY CODESDVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, Traack 1 2 2 Digit 2, Track 2 3 3 Digit 3, Track 3 4 4 Digit 4, Track 4 5 5 Digit 5, Track 5 6 6 Digit 6, Track 6 7 7 Digit 7, Track 7 8 8 Digit 8,Track 8 9 9 Digit 9, Track 9 0 0 Digit 0, Track 10 Volume Up VolUp Volume Up Volume Down V...
96 INSTALLER KEY CODESRECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Prese...
100 INSTALLER KEY CODESCD KEY FUNCTION UNO-S1 CD 1 1 Digit 1, Track 1,Dsc1 2 2 Digit 2, Track 2,Dsc2 3 3 Digit 3, Track 3,Dsc3 4 4 Digit 4, Track 4,Dsc4 5 5 Digit 5, Track 5,Dsc5 6 6 Digit 6, Track 6,Dsc6 7 7 Digit 7, Track 7,Dsc7 8 8 Digit 8,Track 8,Dsc8 9 9 Digit 9, Track 9,Dsc9 0 0 Digit 0, Trck1...
102 INSTALLER KEY CODESHOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 Volume Up VolUp Volume Up Volume Down VolDn Volume Down Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channel...
104 INSTALLER SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Player CD 1 CD Player 1 CD 2 CD Player 2 CD 3 CD Player 3 Class Classical Compr Co...
INSTALLER SETUP FORMS Tuner Russound N/A P e ripher al N/A N N/A N N/A N/A 106
CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 102.5 102.5 102.5 RCA C ables 102.5 102.5 102.5 UNO-S1 UNO-S1 Sharing a single CAM6.6T (internal tuner) with multiplecontrollers This arrangement can support up to six CAM6.6 unitsfor up to 36 zones/6 sources. Each...
CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel(Controller ID 1) CAM6.6 RS-232 INTERFACE IR L R A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR L R A UD...
SAMPLE CONFIGURATIONS MULTIPLE CONTROLLERS WITH THREE TUNERS Sharing an ST2 Dual Tuner with multiple CAM6.6 con-trollers (with and without tuners) The configuration below is suitable for 7 to 12 zonesthat can access the ST2 Dual Tuner and the CAM6.6Ttuner. This configuration uses RCA “Y” cables from...
TECHNICAL SPECIFICATIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS into...
CAM6.6 Six-Zone, Six-Source Controller CAM6.6T Six-Zone, Six-Source AM/FM Receiver INSTRUCTION MANUAL Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388 e-mail: [email protected] Copyright ©2006 Russound ® All rights reserved. All trademarks are property of...
Russound Manuals
-
Russound DPA-6.12
Manual
-
Russound SMS3
Manual
-
Russound R275HC
Manual
-
Russound LCR7
Manual
-
Russound OB-R6F
Manual
-
Russound CAM6.6T
Manual
-
Russound A-LRC1
Manual
-
Russound K2
Manual
-
Russound ST2-XM
Manual
-
Russound CA-Series
Manual
-
Russound VM1
Manual
-
Russound 4-Zone
Manual
-
Russound DPA-4.8
Manual
-
Russound CA6.4
Manual
-
Russound OB-R6G
Manual
-
Russound SS-4
Manual
-
Russound DPA-1.2
Manual
-
Russound CA-LCD.2
Manual
-
Russound CAS-RC
Manual
-
Russound CAM6.6T-S1
Manual