Royal Sovereign RSS Series - Manuals

RSS, RSR, RSH Series 8 7 Control Buttons 1. UPPER: To change upper roller temperature by pressing button, then up or down arrow. (range 32~320°F or 0~160°C) 2. LOWER: To change lower roller temperature by pressing button, then up or down arrow. (range 32~320°F or 0~160°C) 3. SPEED: To change speed o...

RSS, RSR, RSH Series 10 9 9. USING FOOT PEDAL AND REMOTE CONTROL 10. USING CROSS CUTTER USING FOOT PEDAL Place the foot pedal on the floor in front of the machine.Once all correct settings are displayed, you may use thefoot pedal to operate the laminator for “Hands Free Operation.” To activate the m...

RSS, RSR, RSH Series 12 11 12. LOADING FILM 13. THREADING FILM Royal Sovereign films are wound with the adhesive side facing the inside of the roll(adhesive in). Loading films to upper and lower film shafts:(See page 5 for assistance with parts identification.) 1. Remove the upper and lower film sha...

RSS, RSR, RSH Series 16 15 Figure 1 1. Lay the decaled image face down on a flat surface. Carefully peel back and put a crease along the edge ofthe release liner (Approximately 1 in or 25mm, Figure 1). 2. With the image facing up, align the image onto the board. Press firmly from the center out (Fig...