Royal Sovereign RHD-2201 - Manual

Page 2 - Page; TABLE OF CONTENTS

Introduction 3 Package Contents 3 Safety Precautions 4 Parts 5 Features Guide 7 Operating Instructions 8 Maintenance 10 Trouble Shooting Guide 10 Warranty 12 Contents Page TABLE OF CONTENTS 2 RHD-2201

Page 4 - SAFETY PRECAUTIONS; Keep flammable and wet objects away from the machine.

SAFETY PRECAUTIONS 4 Failure to comply with any of the following safety procedures could result in serious injury.Keep this information for future reference. WARNING 1. Insure the unit is plugged into a properly grounded outlet with the correct voltage. 2. Only licensed electricians should service o...

Page 5 - PARTS

5 RHD-2201 PARTS Metal cover Cover Roller Operation pane Entrance Exit Power cord Power switch

Page 6 - Detail for the operation panel

6 Detail for the operation panel Power : It starts after pushing button, and it is set temperature 90ºC and speed 6step(75mic+80g) when the start.Please push the power button when shut off. It is set the temperature60ºC and speed 2step automatically, then it is stop automatically after fora while. H...

Page 7 - FEATURES GUIDE

7 FEATURES GUIDE 1. 6 Rollers Product : High quality and fast speed with 6 Rollers laminator. 2. Hot and Cold function : There are Hot and Cold function that can be used both hot and cold film 3. Use different film : Hot film, Cold film, Thinflex film, Foam board, Foil 4. Temperature and Speed Contr...

Page 8 - OPERATING INSTRUCTIONS; Place the machine on a flat sturdy surface.; Finishing lamination; Starting lamination

8 OPERATING INSTRUCTIONS 1. Place the machine on a flat sturdy surface. 2. Insure the unit is plugged into a properly grounded outlet with the correct voltage power plug and outlet. 3. Turn the laminator ON located on the rear of the machine. 4. Push on POWER button. 5. Press the HOT FILM or COLD FI...

Page 9 - FILM SETTINGS; Film Thickness; THINFLEX; Speed

9 8. Please wait until " Ready Lamp" is steadily lit. ( If materials are laminated while Ready Lamp is blinking, lamination results may not be good enough ) . 9. Once the ready lamp is steadily lit place the lamination pouch with the sealed end first into the entrance of the laminator. 10. T...

Page 10 - Using Cleaning Paper :; Turn the laminator ON located on the rear of the machine.

10 MAINTENANCE TROUBLE SHOOTING GUIDE Using Cleaning Paper : 1. Turn the laminator ON located on the rear of the machine. 2. Please wait until " Ready Lamp" is steadily lit. Once the ready lamp is steadily lit place the cleaning paper in the entrance of the machine. Once the paperhas exited ...

Page 11 - SPECIFICATIONS

11 SPECIFICATIONS RHD-2201 Description RHD-2201 Unit dimension ( mm ) 557( W ) x 282( D ) x 145 ( H ) Max. laminating width ( mm ) 346 Laminating pouch thickness ( micron ) 75 ~ 250 Max. laminating thickness ( mm ) 3 Max. laminating speed ( mm /min ) 2700 Number of rollers ( EA ) 6 Heating method HO...

Page 12 - LIMITED ONE YEAR WARRANTY; and its affiliated companies; Royal Sovereign International Inc.

12 LIMITED ONE YEAR WARRANTY This warranty applies to repair or replacement of product found to be defective in material or workmanship for one year from the date of the original purchase. This warranty is extended only to the original purchaser. This warranty does not apply to damage resulting from...

Royal Sovereign RHD-2201 - Manual

Table of Contents:

Summary

Other Royal Sovereign Models