Royal Sovereign NPH-1200 - Manuals

Page 2 - *MEMORY WORKING CONDITION AND; TABLE OF CONTENTS

TOPICS PAGE INTRODUCTION ------------------------------------------ SAFETY PRECAUTIONS ------------------------------------ CHARACTERISTICS OF NPH-1200N/900N ---------------------- SPECIFICATIONS ----------------------------------------- SETUP ------------------------------------------------ MAJOR P...

Page 3 - INTRODUCTION; understood and followed before operating the machine.; SAFETY PRECAUTIONS

Thank you for purchasing a Royal Sovereign Laminating Machine. To insure high quality lamination, please read this instruction manual thoroughly. For additional product support or factory-direct ordering information, call Royal Sovereign Customer Service at (201)568-0830 or toll free call, (800)397-...

Page 5 - Description; SETUP

Place laminator on a sturdy, flat work surface. Allow ample clearence behind laminator for laminated document or photograph to exit completely without bending. Connect laminator to an electrical outlet that matches laminator's rated voltage and power requirements. If an extension cord is required, u...

Page 6 - Roller Cover Screws; MAJOR PARTS IDENTIFICATION

1. Top Cabinet 2. Roller Cover 3. Roller Cover Screws 4. Control Panel 5. LCD Window 6. Input 7. Output 8. Power Cord MAJOR PARTS IDENTIFICATION 6

Page 7 - CONTROL PANEL SETTINGS; LCD DISPLAY

Appropriate speed and temperature may be set, using the LCD controller. The LCD panel was designed for convenience, by incorporating the ability to program your settings into "Memory". 1. CONTROL PANEL SETTINGS LCD DISPLAY BUTTONS CONTROL PANEL INSTRUCTIONS T-Check COLD MEMORY HOT/COLD 7

Page 10 - HOW TO SET THE BUTTONS

4. HOW TO SET THE BUTTONS (Buzzer rings each time you press the button.) 1.Temperature available range from 20℃ to 160℃. 2.Each time you press or to set temperature, it will change 1℃(1℉) at a time. If you press the button for more than 2 seconds, temperature will change automatically. 1.You can use...

Page 12 - LAMINATING STEPS

1. HOT LAMINATING 1. Press the power button. 2. Please refer Information Panel on the front of product. 3. Select a memory setting by pressing the and button. 4. It is ready when the LCD window shows and the buzzer rings three times. 5. After Insert document or photograph to be laminated into a lami...

Page 14 - COLOR FOIL LAMINATING; bent. Try not to touch the document until it has cooled down.

3. COLOR FOIL LAMINATING **Your laminator has ability to add color by applying color foil to documents copied or printed by lasor printer or toner copier.** **PAPER CARRIER is required** 1. Press the power button to turn the laminator on. 2. Find FOIL FUNCTION using the up arrow. 3. It is ready when...

Page 15 - MOUNT BOARD LAMINATING; *For general lamination, set pressure springs to lower position.

4. MOUNT BOARD LAMINATING **You can laminate photographs or pictures on a hard mounting board up to 2mm thickness** 1. Press the power button to turn on. 2. Temperature 130 and speed 1 is set for Foil function. 3. It is ready when LCD window shows and the buzzor rings 3 times. 4. Set material on Mou...

Page 16 - could cause serious harm.; HOW TO CLEAN ROLLERS AND REMOVE; Roller Cover

1. Cleaning rollers with a clean and thick paper 1) If film adhesive apears on the laminated pouch surface, Insert a sheet of clean, thick paper (about 0.5mm(1/50") thickness) into the machine 2~3 times on 100℃(212℉) setting. The paper will attract the excess adhesive from the roller. 2. Cleanin...

Page 17 - IMPORTANT SAFETY CONCERNS

1. Please be cautious that neckties, necklaces, long hair and clothing are kept well away while operating the laminator.2. Prevent children from accessing the machine.3. Make certain that the machine is connected to an adequate power source.4. Do not use for any purpose other than lamination. 1. Wid...

Page 18 - ONE YEAR LIMITED COMMERCIAL/PROFESSIONAL WARRANTY

This product is warranted for 1 year from date of purchase to be free fromelectrical or mechanical defects in material and workmanship. Should productfail to operate during warranty period, return it, freight prepaid, to RoyalSovereign Corporation, 100 West Sheffield Avenue, Englewood, NJ 07631,for ...