Regency IG35-LPG - Manuals

5 Regency IG35 Gas Inbuilt Fireplace INSTALLATION IMPORTANT MESSAGE The Regency Gas Fireplace must be installed in accordance with these instructions. Carefully read all the instructions in this manual fi rst. Note: Failure to follow these instructions could cause a malfunction of the heater which c...

6 Regency IG35 Gas Inbuilt Fireplace INSTALLATION GAS CONNECTION 3) Locate the center point where the fl ue will pass through the chimney above the appli-ance. Move the appliance into the exact location where it is to be installed. Ensure that the Insert is level. CAUTION: If the glass is removed fo...

7 Regency IG35 Gas Inbuilt Fireplace INSTALLATION FLUEING THE APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A SEPARATE SOLID FUEL BURNING APPLIANCE. This appliance is designed to attach to a 100 mm diameter twin skin or listed gas fuel type fl ue liner running the full length of the chim...

8 Regency IG35 Gas Inbuilt Fireplace TEST FOR FLUE SPILLAGE A " spillage" test must be made before the installed unit is left with the customer. Follow the procedure below: 1) Start all exhaust fans in the home and then close all external doors and windows in the house. 2) Light the unit and...

9 Regency IG35 Gas Inbuilt Fireplace INSTALLATION Conversion Kit #486-968 for NG to LPG Model THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !! Conversion Kit 486-968 Contains: Qty. Part # Description1 904-645 Burner Ori fi ce #51 1 908-528 Red "LPG&...

13 Regency IG35 Gas Inbuilt Fireplace The "02" refer numbers (i.e. 02-65) are molded into the rear of each log. 1) Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position. 2) Sprinkle the embers on the front, left and right ...

16 Regency IG35 Gas Inbuilt Fireplace PREMIUM FLUSH FRONT INSTALLATION 6) Place the ECS manual control switch key pad on the outside of the opening in the faceplate and the control switch to the inside of the faceplate. Align the holes and secure in place using the 2 bolts, washers, phenolic spacers...

21 Regency IG35 Gas Inbuilt Fireplace REMOTE CONTROL Use the Regency Remote Control Kit approved for this unit. Use of other systems may void your warranty. The remote control kit comes with a hand held transmitter and a wall mounting plate. 1) Choose a convenient location to mount the hand held tra...

22 Regency IG35 Gas Inbuilt Fireplace WIRING WITH PREMIUM FLUSH FRONT OPTION CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. WARNING: Electrical Grounding Instructions This appliance is equipped with a three pronged (...

23 Regency IG35 Gas Inbuilt Fireplace OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Before operating this appliance, proceed through the following check list. 1) Read and understand these Instructions before operating this appliance. 2) Check to see that all wiring is correct and enclosed to prevent...

24 Regency IG35 Gas Inbuilt Fireplace COPY OF LIGHTING INSTRUCTION PLATE OPERATING INSTRUCTIONS NORMAL OPERATING SOUNDS OF GAS APPLIANCES It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel u...

25 Regency IG35 Gas Inbuilt Fireplace MAINTENANCE CAUTION: ANY SAFETY SCREEN OR GUARD REMOVED FOR SERV-ICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERAT-ING THE APPLIANCE. CLOTHING OR OTHER FLAM-MABLE MATERIAL SHOULD NOT BE PLACED ON OR NEAR THE APPLIANCE. DO NOT USE THIS APPLIANCE IF ANY PART HAS...

26 Regency IG35 Gas Inbuilt Fireplace MAINTENANCE FAN MAINTENANCE To Remove Fan: 1) Turn the unit off and allow it to cool to room temperature, 2) Unplug or disconnect power source to stove. 3) Open the bottom louvre. 4) Remove the ECS harness from the back clip. 5) Remove the 2 screws that secure t...

27 Regency IG35 Gas Inbuilt Fireplace MAINTENANCE REMOVING VALVE TRAY 1) Unplug or disconnect the power source to the stove. 2) Shut off the gas supply and remove the gas connection from the valve. 3) Remove the top louvre. 4) Remove the safety screen. 5) Remove the screen door. 6) Remove the logs. ...

28 Regency IG35 Gas Inbuilt Fireplace PARTS LIST ELECTRONIC COMPONENTS PARTS LIST 910-936 910-082 910-088 910-089 910-084 910-527910-935 910-080 910-521, 910-522, 910-523, 910-525 910-912 910-906 910-083 910-916 910-514 FG37 FG38 FG39 PG33 PG36 HG35 PG121/PG131 IG35 PG36D 910-909 Fan Resistor 910-93...

29 Regency IG35 Gas Inbuilt Fireplace MAIN ASSEMBLY Part # Description Part # Description 1) 910-169/P Fan Motor (240 V)2) 910-714 Power Cord 240 Volts 3) 820-389 Thermodisc Bracket 5) 910-006 Terminal Block 6) * Levelling Bolts 5/16 x 3 Hex Head 948-216 Logo Plate 918-448 Manual 486-904 Brick Panel...

30 Regency IG35 Gas Inbuilt Fireplace PARTS LIST FACEPLATE ASSEMBLY Part # Description Part # Description 87) 910-140 Fan HI/OFF/LOW Switch88) 910-246 Burner ON/OFF Switch 486-918 Faceplate & Trim Complete - Regular 91) * Faceplate Side Right - Regular 92) * Faceplate Top - Regular 93) * Facepla...

31 Regency IG35 Gas Inbuilt Fireplace WARRANTY Exclusions: This limited Lifetime Warranty does not extend to or include paint, door or glass gasketing or trim. It does not cover installation and operational related problems such as over- fi ring, downdrafts or spillage caused by environmental condit...