Raymarine 81006-3 - Manuals

Page 2 - Installation Guide

Linear Rudder Position Sensor Installation Guide Document number: 81006-3Date: May 2001 81006_3.book Page 1 Tuesday, May 22, 2001 1:03 PM

Page 3 - Important information; Safety notices; Product installation; EMC conformance

2 Linear Rudder Position Sensor Important information Safety notices WARNING: Product installation This equipment must be installed and operated in accordance with the instructions contained in this handbook. Failure to do so could result in poor product performance, personal injury and/or damage to...

Page 4 - Introduction; Product description; Parts supplied

Installation Guide 3 Introduction Product description The linear rudder position sensor (part number: M81188) is designed for ‘bullhorn’ style hydraulic outboard steering systems. It is totally weatherproof and designed to be mounted on the bullhorn ram. It transmits the precise position of the boat...

Page 5 - Mounting

4 Linear Rudder Position Sensor Mounting 1. Use the steering system to position the bullhorn ram amidships. 2. If necessary, release the hydraulic pressure from the boat’s hydraulic steering system Note: Contact your steering gear manufacture for advice on this step, and follow their instructions fo...

Page 6 - Connecting to the course computer; Post installation checks

Installation Guide 5 10. Tighten the hose clamps around the bullhorn ram and the rudder sensor’s barrel. 11. Tighten the starboard bullhorn bolt to secure the U-bracket. 12. Fit and tighten the supplied nut and washer to secure the threaded rod end of the sensor’s shaft to the U-bracket. Notes: 1. I...

Page 8 - EMC Installation & Service Guidelines; IMPORTANT NOTE; Please keep this document for future reference.; Safety; optimum; wherever possible

Raymarine EMC Guidelines EMC Installation & Service Guidelines IMPORTANT NOTE All Raymarine equipment and accessories are designed to the best industry standards foruse in the leisure marine environment. When powered up, all electrical equipment produces electromagnetic fields. These cancause ad...

Page 9 - Suppression Ferrites

Raymarine EMC Guidelines • Raymarine specified cables are used at all times. Cutting and rejoining these cables cancompromise EMC performance and so must be avoided unless doing so is detailed inthe installation manual. • If a suppression ferrite is attached to a cable, this ferrite should not be re...

Page 10 - Limited Warranty Certificate; Warranty Limitations

Document number: 84064-8 April 2001 Limited Warranty Certificate Raymarine warrants each new Light Marine/Dealer Distributor Product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 ye...

Page 11 - Factory Service Centers

Factory Service Centers United States of America UK, Europe, Middle East, Far East Raymarine Inc22 Cotton Road, Unit DNashua, NH 03063-4219, USA Raymarine LtdAnchorage Park, PortsmouthPO3 5TD, England Telephone: +1 603 881 5200Fax: +1 603 864 4756www.raymarine.com Telephone: +44 (0)23 9269 3611Fax: ...