PrecisionPower PAR-650 - Manuals

retract with each press. ● IN and OUT Position - A knob is set to its in position when it is initially extended. To set a knob to its out position pull gently on the knob until a plainly-felt notched position is reached. NOTE: DO NOT use excessive force when using the adjustment knobsor damage to th...

NOTE: If connecting more than one input source to the PAR-650, usethe Source 1 gain controls to match the input level of both sources. 3. Set the filter gains to the flat (center) setting. 4 Complete all signal and power connections to the PAR-650. 5 Turn the system on and increase the gain on the S...

5. If the front and rear outputs have been set to high pass by setting theswitch on the rear panel to the high pass setting, adjust the frontcrossover to the lowest possible setting with a minimum of distor tion.Repeat for the rear speakers. 6. At this time adjust the subwoofer frequency and volume ...