PrecisionPower PPI4240 - Manual
PrecisionPower PPI4240 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – The ground wire should be the same size as the power wire.
- Page 6 – Grounding; and the; Speaker Wires
- Page 7 – Connect the 12-volt constant power cable from the battery here.; Subwoofer Speaker Terminals; Insert the speaker cable for your subwoofer here.
- Page 8 – All; amplifiers are capable of being bridged into a 4-Ohm mono output; four channel amplifiers, in the same way.; amplifier offers you the flexibility of mixed mono operation.
- Page 9 – Plug in the front RCA cables from the source unit or; signal; Front Gain Control
- Page 10 – Rear Gain Control; Select the desired crossover setting, FULL/HPF/LPF for the RCA
- Page 17 – System Three
- Page 18 – System Four
- Page 21 – Front and rear channels
Thank you for choosing
PPI
audio epuipment. Now, HANG ON!
PPI
products are engineered and manufactured to deliver a wild ride of
performance, sound quality, and reliability. This
PPI
product reflects our
commitment to offer you versatility and quality for years of incredible power
and listening enjoyment!
SERVICE
Do not attempt to service
PPI
products yourself. Performing exploratory
surgery on your audio equipment yourself will void the warranty. All parts of
your
PPI
gear have been built to our specifications. These parts are not
made available to any unauthorized
PPI
dealer nor are they for sale. Our
goal is to make sure that your
PPI
product will always perform as good as
the day it was purchased. Contact your authorized
PPI
dealer about obtain-
ing any warranty service through
PPI
. (See Warranty inside back cover.)
CAUTION!
The extended use of a high powered audio system may result in hearing loss
or damage. While
PPI
systems are capable of "Concert Level" volumes,
they are also designed for you to enjoy at more reasonable levels all of the
creative expressions made by musicians. Please stay seated while driving
and observe all local sound ordinances.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 The following formula is a guide to determine current draw so you canchoose the proper gauge power cable and fuses for your system. A 50%amplifier efficiency rating is used as an average. (Total 4-Ohm rate RMS output x 2) x 2 = Total Input Wattage Total Input Wattage/Supply Voltage = Current Draw ...
5 Remote Turn-on Your head unit should have a lead marked ‘remote’ or ‘ power antenna’ whichwill be used to turn on your amplifier. Extend this lead through your vehiclealong with your RCA signal wires. Strip 1/4 inch of the insulation off the wireand insert the end into the corresponding terminal o...
6 1. Battery Power Connect the 12-volt constant power cable from the battery here. 2. Remote Connect the remote turn on lead from you source unit here. This connection will turn the amplifier on when the source unit is powered up. 3. Ground Connect your ground wire here. Make sure you use the same g...
