PrecisionPower PAR-650 - Manual
PrecisionPower PAR-650 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Master Volume/Fader Control Knob; subwoofer output volume.
- Page 8 – Complete all signal and power connections to the PAR-650.; CROSSOVER AND FILTER ADJUSTMENTS
- Page 9 – SYSTEM DIAGRAM
- Page 11 – Warranty; LIMITED TWO YEAR CONSUMER WARRANTY:; WARRANTY OF
PAR–650
5 Band Paragraphic EQ
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
retract with each press. ● IN and OUT Position - A knob is set to its in position when it is initially extended. To set a knob to its out position pull gently on the knob until a plainly-felt notched position is reached. NOTE: DO NOT use excessive force when using the adjustment knobsor damage to th...
NOTE: If connecting more than one input source to the PAR-650, usethe Source 1 gain controls to match the input level of both sources. 3. Set the filter gains to the flat (center) setting. 4 Complete all signal and power connections to the PAR-650. 5 Turn the system on and increase the gain on the S...
5. If the front and rear outputs have been set to high pass by setting theswitch on the rear panel to the high pass setting, adjust the frontcrossover to the lowest possible setting with a minimum of distor tion.Repeat for the rear speakers. 6. At this time adjust the subwoofer frequency and volume ...
