PrecisionPower DCX-730 - Manuals

Page 4 - install this unit in the

2. Arrows. Use the arrow buttons to navigate through the menus and to adjust a menu setting. 3. LCD Display. Backlit display, soft-blue background for easy viewing at night. 4. Presets. Five preset buttons to allow you to select from 5 settings that you have entered. Examples of these presets would ...

Page 5 - FRONT right and left output, RCA phono connections to amplifier.; OPERATION; Pressing the Mode button at any time will return you to the

Input Connections 1. Connects to the display controller cable. This cable supplies power to the controller module and transmits control and display signals between thedisplay and processor module. 2. SUB right and left input, RCA phono connections. 3. REAR right and left input, RCA phono connections...

Page 6 - Arrow Buttons; arrow button will; Recalling Presets; us

5 left unattended for over a minute, the unit will return to the Homemenu. If any of the settings are changed pressing the Mode buttonor after one minute elapses, the setting(s) will be saved to preset6. Preset 6 is a scratchpad where settings are saved temporarilyso that the setting(s) can be tried...

Page 7 - Because of the nature of the analog/digital audio; Volume; sa

Storing Presets While in any of the parameter menus, you can save any changes to settings bypressing the desired number button that you wish these settings to be saved to. Theparameters which have changed will replace the default parameters in the preset. MENUS Sensitivity The sensitivity parameter ...

Page 8 - Delay; The value of 13.52 varies with temperature, a chart is given at the

Delay The delay parameter allows you to adjust the delay of individual channels by upto 70 msec. For example, this allows adjusting the driver’s side speakers audio tocoincide with the arrival of the passenger side speaker at a listening point in thevehicle. Similarly, the audio arrival from the fro...

Page 10 - Xover; High; QBASS

EQ (Equalization) Frequency: 20 Hz to 20 kHz Q: 0.1 TO 9.00 Level: ±18dB The equalization adjustment allows up to 7 bands per channel of parametricequalization. These allow you to equalize problem areas in the response bymatching the equalization filter shape to the response. Also the option of usin...

Page 11 - Because QBASS is a boost only EQ system, it is easy to; TYPICAL SYSTEM DIAGRAM; Although the input and output connections are labeled

NOTE: Because QBASS is a boost only EQ system, it is easy to either clip the amplifier, or overdrive a speaker past its excursionlimits. To make up for frequency response that is 10dB down (sayat 45 Hz), 10X the amplifier power is required. This may tax bothdriver and amplifier. It may also exhaust ...

Page 13 - LIMITED TWO YEAR CONSUMER WARRANTY:

LIMITED TWO YEAR CONSUMER WARRANTY: Directed Electronics, Inc. promises to the original purchaser, to replace thisproduct should it prove to be defective in workmanship or material under normaluse, for a period of two years from the date of purchase by the dealer as indicatedby the date code marking...