Polar PWD2635W-1 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS; To avoid water overflowing when cleaning your dispenser,; GROUNDING INSTRUCTIONS

Thank you for purchasing a POLAR ® Water Dispenser. Please read the enclosed operating instructions carefully and retain this booklet for future reference. We have carefully engineered your POLAR ® Water Dispenser to give you years of enjoyment and trouble free operation. IMPORTANT SAFEGUARDS • For ...

Page 3 - “flashing”; NOTE: This button is designed to be recessed inside the cabinet.

YOUR POLAR ® WATER DISPENSER 1. Bottle support collar 2. Ready-To-Dispense indicator lights: Red: “flashing” Heater (hot tank) is in operation "on” The hot water has reached optimum temperature and is ready for dispensing "off" Heater (hot tank) is off, however remaining water within the...

Page 4 - OPERATING INSTRUCTIONS; Initial Product Cleaning Procedure; Cleaning Kit; Figure A

OPERATING INSTRUCTIONS Initial Product Cleaning Procedure Like most appliances, your water dispenser requires periodic maintenance for maximum efficiency and performance and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water dispenser and p...

Page 5 - ACTIvATING THE ON DEMAND; IMPORTANT NOTICE ABOUT LEAkING BOTTLES; BELOW THE RESERvOIR LIP.

4. Plug in the water dispenser. 5. Set the power switch at the rear of the dispenser to the ON position. 6. Ready-to-dispense indicator lights will illuminate when the water reaches optimum temperature and is ready for use. In order to get steaming hot water, the (on demand) KETTLE * feature button ...

Page 6 - CLEANING AND MAINTENANCE

Dispensing Room and Cold Water Place a glass under the spigot. For cold water, press the button downward until the desired amount of water is dispensed. Before the KETTLE * Feature is activated, the button dispenses room temperature water. To dispense room water, press the button downward until the ...

Page 7 - Hot Cool

Cleaning Your Water Dispenser IMPORTANT: Make sure you turn the power switch to the OFF position and unplug the dispenser before performing any of the following cleaning procedures. Cleaning the Outside of the Water Dispenser The outside of the dispenser can be wiped clean with a water dispenser cle...

Page 9 - please contact us at

SPECIFICATIONS TROUBLESHOOTING TIPS ATTENTION: Do not return this product to the store. For questions on operation, assembly or parts, please contact us at www.greenwayhp.com or 1-866-253-0447 . WARNING: The Water Dispenser heats and dispenses water to 201˚ F / 91˚ C which can cause severe burns or ...

Page 10 - FREqUENTLY ASkED qUESTIONS; Why is my water dispenser leaking?

FREqUENTLY ASkED qUESTIONS q: Why is my water dispenser leaking? A: Many times a leak is caused by a defective water bottle with a small crack or pinhole (see Important Notice About Leaking Bottles, pg 4). IMPORTANT: To avoid water overflow while cleaning the dispenser, always remove the bottle supp...