Planar PX2411MW - Manuals

Planar PX2411MW – Manual in PDF format online.

Manuals:

Manual

Manual Planar PX2411MW

Summary

Page 2 - permission. Windows is a registered trademark of Microsoft Inc.

The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or trans...

Page 3 - TABLE OF CONTENTS; Product registration and technical support; For your safety; Before you operate the monitor

TABLE OF CONTENTS ----------------------------------------------------------- 1 ------------------------------------------------ 2 ----------------------------- 3 Product registration and technical support 22 For your safety Safety precautionsSpecial notes on lcd monitors Before you operate the moni...

Page 4 - FOR YOUR SAFETY; which the receiver is connected.

1 Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) FOR YOUR SAFETY NOTE: This equipment has been tested and found to comply with the limits for...

Page 5 - Important Recycle Instruction:

2 PRECAUTIONS • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Us...

Page 6 - BEFORE YOU OPERATE THE MONITOR; FEATURES; Stand

3 SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • ...

Page 7 - is sprung loaded and may expand quickly when; STAND

INSTALLATION INSTRUCTIONS 1 Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.2 Install the Stand-Base to the Monitor. 3 Fix the Monitor with the Stand by the screw 2 firmly, and the knob of the scew pu...

Page 8 - Connecting the Signal Cable; and the other

5 CONTROLS AND CONNECTORS SIGNAL CABLE Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). Figure 2 Connecting Cables 1. Power Cable 2. HDMI Cable 3. DVI Cable 4. D-SUB Cable 5 Audio cable Connecting the Signal Cable : and the other end ...

Page 9 - ADJUSTING THE VIEWING ANGLE; then adjust the monitor’s angle to your own preference.; NOTES; or break the LCD screen.

6 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle f...

Page 10 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; ECO

7 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be con...

Page 11 - Power Button; ctivates; Auto Adjust

8 FRONT PANEL CONTROL • Power Button : Press this button to switch ON/OFF monitor’s power. • Power Indicator: Blue — Power On mode. Orange —Off mode. • MENU / ENTER : A ctivates OSD menu or function adjust confirm . • • • OSD Lock Function: To lock the OSD, press and hold the MENU button while the m...

Page 13 - ADJUSTING THE PICTURE

10 ADJUSTING THE PICTURE Main Menu Item Main Menu Icon Sub Menu Description Enhances Contrast RatioNote: When this function is turned "On" you cannot adjust the current settings for Contrast, Brightness, ECO mode or Gamma. (VGA input only) (VGA input only) (VGA input only) (VGA input only)

Page 17 - PLUG AND PLAY; Plug & Play DDC2B Feature; female

14 PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capab...

Page 18 - Possible Solution

15 TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Ch...

Page 19 - ERROR MESSAGE & POSSIBLE SOLUTION; display mode given in the following table.

16 CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width. FOCUS adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizon...

Page 20 - APPENDIX; SPECIFICATIONS

1 7 APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 60cm(23.6") Pixel pitch 0.2715 ( H ) × 0.2715 ( V ) R,G,B Analog Interface Video DVI HDMI Input Separate Sync. H/V TTL H-Frequency Analog:24-80kHz,Digital: 30kHz – 80kHz V-Frequency Analog&Digital: 5 5 -75Hz Display Colo...

Page 21 - FACTORY PRESET TIMING TABLE

18 FACTORY PRESET TIMING TABLE 640 x 480 31.469 59.94 640 x 480 35 66.667 VGA 640 x 480 37.861 72.809 Mac VGA 640 x 480 37.5 75 Dos-mode 720 x 400 31.469 70.087 800 x 600 35.156 56.25 800 x 600 37.879 60.317 800 x 600 48.077 72.188 SVGA 800 x 600 46.875 75 Mac SVGA 832 x 624 49.726 74.551 1024 x 768...

Page 22 - CONNECTOR PIN ASSIGNMENT

19 CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Detect Cable 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground 24 ...

Page 25 - Product Registration and Technical Support

22 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/pro...